TYPE SJ SINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
Technical Parameters
| Model | Size(in) | Rated Cap(KN) | |
| in | mm | ||
| SJ | 2 3/8-2 7/8 | 60.3-73.03 | 45 |
| 3 1/2-4 3/4 | 88.9-120.7 | ||
| 5-5 3/4 | 127-146.1 | ||
| 6-7 3/4 | 152.4-193.7 | ||
| 8 5/8-10 3/4 | 219.1-273.1 | ||
| 11 3/4-13 3/8 | 298.5-339.7 | ||
| 13 5/8-14 | 346.1-355.6 | ||
| 16-20 | 406.4-508 | ||
| 21 1/2-24 1/2 | 546.1-622.3 | 60 | |
| 26-28 | 660.4-711.2 | ||
| 30-36 | 762.0-914.4 | ||
Related products
-
TYPE A DRILL COLLAR SLIPS (WOOLLEY STYLE)
PS SERIES PNEUMATIC SLIPS PS Series Pneumatic Slips are pneumatic tools which are suitable for all kind of rotary table for hoisting drill pipes and handling casings. They are mechanized operating with Strong hoisting force and large working range. They are easy to operate and dependable enough. At the same time they can not only reduce the workload but also improve the work efficiency. Technical Parameter Model rotary Table Size(in) pipe size(in) Ratedload Work P...
-
API Type C Manual Tongs for Oil Drilling
Type Q60-273/48(2 3/8-10 3/4in)C Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and latch steps. Technical Parameters No.of Latch Lug Jaws Short Jaw Hinge Jaw Size Pange Rated Torque / KN·m mm in 1# 2 3/8-7 / 60.33-93.17 2 3/8-3.668 20 2# 73.03-108 2 7/8-4 1/4 3# 88.9-133.35 3 1/2-5 1/4 35 4# 133.35-177...
-
API 7K Type SLX Pipe Elevator for Drill String ...
Model SLX side door elevators with square shoulder are suitable for handling tubing casing, drill collar in oil and natural gas drilling, well construction. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) SLX-65 3 1/2-14 1/4 65 SLX-100 2 3/8-5 3/4 100 SLX-150 5 1/2-13 5/8 150 SLX-250 5 1/2-30 250 ...
-
TQ Hydraulic Power CASING TONG Wellhead tools
Technical Parameters Model TQ178-16 TQ340-20Y TQ340-35 TQ178-16Y TQ340-35Y TQ508-70Y Size range Mm 101.6-178 101.6-340 139.7-340 101.6-178 101.6-340 244.5-508 In 4-7 4-13 3/8 5 1/2-13 3/8 4-7 4-13 3/8 9 5/8-20 Hydraulic system Mpa 18 16 18 18 18 20 Psi 2610 2320 2610 2610 2610 2900
-
API 7K Type DU Drill Pipe Slip Drill String Ope...
There are three types of DU series Drill Pipe Slips: DU, DUL and SDU. They are with large handling range and light weight. Thereinto, SDU slips have larger contacting areas on the taper and higher resistance strength. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Technical Parameters Mode Slip Body Size(in) 4 1/2 5 1/2 7 DP OD DP OD DP OD in mm in mm in mm DU 2 3/8 60.3 3 1/2 88.9 4 1/...
-
API 7K Y SERIES SLIP TYPE ELEVATORS Pipe handli...
The slip type elevator is an indispensable tool in holding and hoisting drilling pipes, casing and tubing in the oil drilling and well tripping operation. It is especially suitable for the hoisting of integrated tubing sub, integral joint casing and electric submersible pump column. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Si...