Products
-
Top Drive Service Loops (Cables)
The top drive cables sold by our company are made of selected imported materials, and the materials selected for the insulation layer of the lead-aluminum protective layer are checked layer by layer, including the soft conductor and the outer sheath coated on the soft conductor, which is composed of a number of thin copper wires. Each strand of fine copper wire is composed of a number of thin copper wires, and a thin steel wire is arranged in each fine copper wire. A filling rope is arranged in the soft conductor, and an isolation layer, an insulating layer and a braided layer are arranged between the outer sheath and the soft conductor from the outside to the inside. The advantages are: corrosion resistance, high temperature resistance, low temperature resistance, freezing resistance, UV resistance, aging resistance, tensile properties and torsional properties.
The interior potting of the travelling cable to fix the cable to prevent friction when the cable comes back to bend, and the two ends are sealed with a new type of high hardness insulation material to prevent water intake. Strict drying treatment should be carried out before potting chemical materials such as epoxy resin and quartz powder, so that bubbles and moisture can not enter the cable plug, and the edge of the lead sheath should be insulated and strengthened.
-
TOP DRIVE IBOP
IBOP, the internal blowout preventer of top drive, is also called top drive cock. In oil and gas drilling, blowout is an accident that people don’t want to see on any drilling rig. Because it directly endangers the personal and property safety of the drilling crew and brings environmental pollution. Usually, high-pressure fluid (liquid or gas), especially gas with mud and gravel, will be ejected from the wellhead at an extremely high flow rate, forming a horrible scene of fireworks roaring. The root cause of the accident comes from the fluid between underground rock layers,
-
VARCO (NOV) Top Drive Spare Parts
Today Top Drive System has been the most widely used power device in oil/gas drilling rig. by followed, the repair and replace of spare parts for TDS become a important practice In the area of oil drilling, from the beginning, Varco top drive systems (TDS) offer unmatched performance and reliability while continuing to drive longer, heavier strings through complex formations, over 2500 Varco TDS is servicing for the oil-field around the world.
-
Hot-rolled Precision Seamless Steel Pipe
The hot-rolled precision seamless steel pipe production line adopts advanced Arccu-Roll rolled tube set to produce casing, tubing, drill pipe, pipeline and fluid piping, etc.
-
Heavy Weight Drill Pipe （HWDP）
Integral heavy weight drill pipe is made from AISI 4142H-4145H alloy structural steel. The manufacturing technique strictly performs SY/T5146-2006 and API SPEC 7-1 standards.
-
Electric Submersible Progressive Cavity Pump
The electric submersible progressive cavity pump (ESPCP) embodies a new breakthrough in oil extraction equipment developments in recent years. It combines flexibility of PCP with reliability of ESP and is applicable for broader range of mediums.
-
Mechanical Drive Drilling Rig
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth.
-
TYPE 13 3/8-36 IN CASING TONGS
Q340-915/35TYPE 13 3/8-36 IN Casing Tongs is capable of making up or breaking out the screws of casing and casing coupling in drilling operation.
-
TYPE SJ SINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
-
TYPE SPSINGLE JOINT ELEVATORS
SP series auxiliary elevator is mainly used as a tool in handling single tubing, casing and drill pipe with taper shoulder. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
-
TYPE A DRILL COLLAR SLIPS (WOOLLEY STYLE)
PS SERIES PNEUMATIC SLIPS PS Series Pneumatic Slips are pneumatic tools which are suitable for all kind of rotary table for hoisting drill pipes and handling casings. They are mechanized operating with Strong hoisting force and large working range. They are easy to operate and dependable enough. At the same time they can not only reduce the workload but also improve the work efficiency.
-
AC Variable Frequency Drive Drawworks
The main components of drawworks are AC variable frequency motor, gear reducer, hydraulic disc brake, winch frame, drum shaft assembly and automatic driller etc, with high gear transmission efficiency.
