DQ50BQ-VSP Top Drive,350TON,5000M, 70KN.M Torque
| Class | DQ50BQ-VSP |
| Nominal drilling depth range (114mm drill pipe) | 5000m |
| Rated Load | 3150 KN |
| Working Height (96” Lifting Link) | 6600mm |
| Rated Continuous Output Torque | 70 KN.m |
| Maximum Breaking Torque | 100 KN.m |
| Static maximum braking torque | 70 KN.m |
| Rotating Link Adaptor Rotation Angle | 0-360° |
| Speed Range of Main Shaft(infinitely adjustable) | 0～220 r/min |
| Back clamp clamping range of drill pipe | 85-220mm |
| Mud circulation channel rated pressure | 35/52 MPa |
| Hydraulic system working pressure | 0～14 Mpa |
| Main motor rated power | 800KW |
| Electric control room input power | 600 VAC/50Hz |
| Applicable ambient temperature | -45℃~55℃ |
| Distance between main shaft center and guide rail center | 405×812mm |
| IBOP rated pressure(Hydraulic / Manual) | 105 MPa |
| Dimensions | 5900mm*1741mm*1615mm |
Related products
-
BOP Pressure Test Turnover Device: Specialized ...
This device supports the full-cycle pressure testing process for various types of BOPs, allowing the equipment to be turned over to test both upper and lower pressure-bearing surfaces. It improves testing efficiency, reduces operational risks, and ensures that BOPs meet API 6A and well control safety standards before deployment, providing reliable protection for subsequent drilling and completion operations.
-
Hook Block Assembly of Drill Rig high weight li...
1. The hook block adopt the integrated design. The traveling block and the hook are connected by the intermediate bearing body, and the big hook and the cruiser can be separately repaired. 2. The inner and outer springs of the bearing body are reversed in opposite directions, which overcomes the torsion force of a single spring during compression or stretching. 3. The overall size is small, the structure is compact, and the combined length is shortened, which is suit...
-
DC Drive Drilling Rig/ Jackup Rig 1500-7000m
The drawworks, rotary table and mud pump are driven by DC motors, and the rig can be used in deep well and ultra deep well operation onshore or offshore. • It can be equipped with top drive device. • It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted. Type and Main Parameters of DC Drive Drilling Rig: Type ZJ40/2250DZ ZJ50/3150DZ ZJ70/4500DZ ZJ90/...
-
116690/2.4.04/2.4.04.001/2.4.04.010/1.19.06.32 ...
2.4.04.017 Accumulator bracket 2.4.04.018 Piston accumulator 2.4.04.019 Piston accumulator 2.4.04.020 Piston accumulator 2.4.04.021 Piston accumulator 2.4.04.022 Accumulator assembly 2.4.04.023 Accumulator rack 2.4.04.024 Piston accumulator 2.4.04.025 Piston accumulator 2.4.04.026 Piston accumulator 2.4.04.027 Piston accumulator 2.4.04.028 Accumulator 2.4.04.029 Accumulator 2.4.05 Oil level indicator 2.4.05.001 Liquid level thermometer 2.4.05.002 Liquid level thermometer 2.4.05.003 Liquid lev...
-
TOP DRIVE IBOP, TDS TDS-8SA, TDS-9SA, TDS-10SA,...
NOV Varco Top drive system Varco TDS TDS-3, TDS-3S, TDS-4, TDS-4S, TDS-5, TDS-7S Varco TDS TDS-8SA, TDS-9SA, TDS-10SA, TDS-11SA, TDS10SH, TDS11SH TDS Manufacture IBOP MODEL O.D. I.D. L thread API in mm in mm in mm VARCO/VSP hydraulic187 IBOP 110103-500 7-23/64 187 3-1/16 78 22-1/2 572 6-5/8 REG BOX-6-5/8 REG BOX manual 187 IBOP 14706-500 7-23/64 187 3-1/16 78 22-19/32 523 6-5/8 REG BOX-6-5/8 REG PIN Typical spare parts: 30177592 BALL/SEAT SET-LOWER IBOP, EXT STOP,ST BO(replaces 99...
-
BX-400S,Water well drilling rig，8.5TON,400M
Parameter name Data overview Maximum drilling depth 400M Hole diameter 105-325MM Drill rod length 3-6M Recommended drill rod diameter 89-102-114MM Maximum turning torque 8000Nm Thrust 8T lifting force 20T stroke of the spindle 6.6M Hoisting lifting force 1.5T Maximum rpm 200r/min Climbing gradient 25″ Weight of dilling rig 8.5T Walking speed 2.5Km/h Dimensions 5200-3800*1800*2350MM Adaptation conditions Loose layer and bedrock Drilling method ...