1. Adopting foldable guide rails, on-site installation is convenient and fast
2. Double cylinder clamp type backup pliers with stable performance
3. Gear and rack type IBOP actuator, precise transmission, improves the service life of IBOP
4. Backup 9 rotating oil channels to achieve full signal feedback for hydraulic elevators
5. Internal force type lifting ring design, suspension and hoisting system without the need for additional configurations
6. High pressure pre tightening flushing pipe improves the service life of flushing pipe.
Nominal Drilling Depth(114mm drill Pipe) |
4000 m |
Rated Load |
2500KN |
275ton |
Working Height (3.3melevator link ) |
6.6m |
21.65ft |
Rated Continuous Output Torque |
48KN.m |
35,405 lb.ft |
Maximum Torque of Breaking out |
72KN.m |
53,052 lb.ft |
Static Maximum Braking Torque |
48KN.m |
35,405 lb.ft |
Speed Range of Main Shaft(stepless adjustable) |
0~180 r/min |
Size Range of Backup Tong |
2 7/8"~5 1/2" |
Rated Pressure of Mud Circulation |
35/52MPa |
5000/7500Psi |
Working Pressure of Hydraulic System |
0~14 Mpa |
0~2280 Psi |
Rated Power of Main Motor |
450KW |
602HP |
Input Power Supplyof VFD Room |
600 VAC/50Hz |
Range of Working Temperature |
-45℃~55℃ |
Distance Between Centers of main shaft and Guide beam |
577.5mm |
1.89ft |
Rated Pressure of IBOP |
105MPa |
15000 Psi |
Overall Dimension |
5700×1550×1640mm |
|