DQ70BS-VSP Top Drive,500TON,7000M,78 KN.M Torque
| Class | DQ70BS-VSP |
| Nominal drilling depth range (114mm drill pipe) | 7000m |
| Rated Load | 4500 KN |
| Working Height (96” Lifting Link) | 6700mm |
| Rated Continuous Output Torque | 78 KN.m |
| Maximum Breaking Torque | 117KN.m |
| Static maximum braking torque | 78 KN.m |
| Rotating Link Adaptor Rotation Angle | 0-360° |
| Speed Range of Main Shaft(infinitely adjustable) | 0～220 r/min |
| Back clamp clamping range of drill pipe | 85-220mm |
| Mud circulation channel rated pressure | 52 MPa |
| Hydraulic system working pressure | 0～14 Mpa |
| Main motor rated power | 2*450KW |
| Electric control room input power | 600 VAC/50Hz |
| Applicable ambient temperature | -45℃~55℃ |
| Distance between main shaft center and guide rail center | 880mm |
| IBOP rated pressure(Hydraulic / Manual) | 105 MPa |
| Dimensions | 5760mm*1724mm*1700mm |
Related products
-
DQ40B-VSP Top Drive,300TON,4000m～4500m,50 KN.m...
Class DQ40B-VSP Nominal drilling depth range (114mm drill pipe) 4000m～4500m Rated Load 2666 KN Working Height (96” Lifting Link) 5770mm Rated Continuous Output Torque 50 KN.m Maximum Breaking Torque 75 KN.m Static maximum braking torque 50 KN.m Rotating Link Adaptor Rotation Angle 0-360° Speed Range of Main Shaft(infinitely adjustable) 0-180r/min Back clamp clamping range of drill pipe 85mm-187mm Mud circulation channel rated pressure 35/52 MPa Hydraulic system worki...
-
F1300 F1600 F2200 3nb1600hl Mud Pump Cylinder L...
These mud pump cylinder liners are core fluid-end spare parts tailor-made for F1300, F1600, F2200 and 3NB1600HL triplex mud pumps widely used in onshore and offshore oil & gas drilling rigs. Adopting premium bimetallic composite structure, they feature a forged 45# steel outer jacket for high pressure bearing and a high-chromium cast iron inner sleeve with hardness reaching 59–67 HRC to fend off abrasion, erosion and corrosion from sand-laden drilling mud. Precision honed inner bore guara...
-
NJ Mud Agitator (Mud Mixer) for Oil field fluid
NJ mud agitator is an important part of mud purification system. In general, each mud tank equips with 2 to 3 mud agitators installed on the circulation tank, which make impeller goes into certain depth under the liquid level by revolving shaft. The circulating drilling fluid is not easy to precipitate because of its stirring and the chemicals added can be mixed evenly and quickly. The adaptive environment temperature is -30~60℃. Main Technical Parameters : Mode...
-
Parallel Gate Valve: API Spec 6A Compliant Well...
Available in multiple configurations including ball screw, FC valve, split gate valve, hydraulic slab gate valve, and gear driving slab gate valve, these valves come in working pressures ranging from 21MPa (3000Psi) to 140MPa (20000Psi), with nominal diameters covering common sizes from 2″ to 7-1/16″. They are available in both manual and hydraulic actuation options to meet diverse operational requirements.
-
RAIL ASSY,BAIL PACKAGE, TDS-11SA,BEAM,GUIDE,INT...
112875 PIN,PIVOT,BOGEY 117782 PIN,JOINT,2.0DIAX12.5,MS28 123716 Кронштейн направляющей для рамы гашения момента 124517 BEAM,GUIDE,INTERMED,18 FT 30124518 BEAM,GUIDE BOTTOM SECTION (MTO) 124517-501 BEAM,GUIDE,INTERMED,12′,TDS9 124517-502 BEAM,GUIDE,INTERMED,24′,TDS11 124517-503 BEAM,GUIDE,INTERMED,6′,TDS11 121442-120 BAIL PACKAGE, TDS-11SA Bail Length: 120” 30171423-PH75 SHIPPING PACKAGE, GUIDE BEAM: W/SKID Setback: 30.0″ 30154688-156A “GUIDE BEAM KIT: Mast Heigh...
-
DQ50BQ-VSP Top Drive,350TON,5000M, 70KN.M Torque
Class DQ50BQ-VSP Nominal drilling depth range (114mm drill pipe) 5000m Rated Load 3150 KN Working Height (96” Lifting Link) 6600mm Rated Continuous Output Torque 70 KN.m Maximum Breaking Torque 100 KN.m Static maximum braking torque 70 KN.m Rotating Link Adaptor Rotation Angle 0-360° Speed Range of Main Shaft(infinitely adjustable) 0～220 r/min Back clamp clamping range of drill pipe 85-220mm Mud circulation channel rated pressure 35/52 MPa Hydraulic system working pr...