NJ Mud Agitator (Mud Mixer) for Oil field fluid

Short Description:

NJ mud agitator is an important part of mud purification system. In general, each mud tank equips with 2 to 3 mud agitators installed on the circulation tank, which make impeller goes into certain depth under the liquid level by revolving shaft. The circulating drilling fluid is not easy to precipitate because of its stirring and the chemicals added can be mixed evenly and quickly. The adaptive environment temperature is -30~60℃.


Product Detail

Product Tags

NJ mud agitator is an important part of mud purification system. In general, each mud tank equips with 2 to 3 mud agitators installed on the circulation tank, which make impeller goes into certain depth under the liquid level by revolving shaft. The circulating drilling fluid is not easy to precipitate because of its stirring and the chemicals added can be mixed evenly and quickly. The adaptive environment temperature is -30~60℃.

Main Technical Parameters :

Model

NJ-5.5

NJ-7.5

NJ-11

NJ-15

Motor power

5.5KW

7.5KW

11KW

15KW

Motor speed

1450/1750rpm

1450/1750rpm

1450/1750rpm

1450/1750rpm

Impeller speed

60/70rpm

60/70rpm

60/70rpm

60/70rpm

Impeller diameter

600/530mm

800/700mm

1000/900mm

1100/1000mm

Weight

530kg

600kg

653kg

830kg


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • API 7K TYPE AAX MANUAL TONGS Drill String Operation

      API 7K TYPE AAX MANUAL TONGS Drill String Opera...

      Type Q73-340/75(2 7/8-13 3/8in)AAX Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws. Technical Parameters No.of Latch Lug Jaws Size Pange Rated Torque mm in KN·m 1# 73-95.25 2 7/8-3 3/4 55 2# 88.9-114.3 3 1/2-4 1/2 3# 107.95-133.35 4 1/4-5 1/4 75 4# 127-177.8 5-7 5# 174.6-219.1 6 7/8-8 5/8 6...

    • Vacuum Rake Type Heating Dryer new design

      Vacuum Rake Type Heating Dryer new design

      Simple type The half tube heats No base Add the short stanza tube Did not turn to move the part Specification: 1500L-3000L Common type Jacket heating With insulating layer Foot valve discharge port Specification: 1500L-10000L The whole type of figure Jacket heating Monoframe With gearing Specification: 1000L-10000L The half tube heats the type The half tube heats With water the rake teeth throughout, the double seals completely the structure Sprocket drive The whole ...

    • API Type LF Manual Tongs for Oil Drilling

      API Type LF Manual Tongs for Oil Drilling

      TypeQ60-178/22(2 3/8-7in)LF Manual Tong is used for making up or breaking out the screws of drill tool and casing in drilling and well servicing operation. The handing size of this type tong can be adjusted by changing latch lug jaws and handling shoulders. Technical Parameters No.of Latch Lug Jaws Latch Stop Size Pange Rated Torque mm in KN·m 1# 1 60.32-73 2 3/8-2 7/8 14 2 73-88.9 2 7/8-3 1/2 2# 1 88.9-107.95 3 1/2-4 1/4 2 107.95-127 4 1...

    • 3NB Series Mud Pump for oil field fluid control

      3NB Series Mud Pump for oil field fluid control

      Product Introduction: 3NB series mud pump includes:3NB-350, 3NB-500, 3NB-600, 3NB-800, 3NB-1000, 3NB-1300, 3NB-1600, 3NB-2200. 3NB series mud pumps are inclusive of 3NB-350, 3NB-500, 3NB-600, 3NB-800, 3NB-1000, 3NB-1300, 3NB-1600 and 3NB-2200. Model 3NB-350 3NB-500 3NB-600 3NB-800 Type Triplex single acting Triplex single acting Triplex single acting Triplex single acting Output power 257kw/350HP 368kw/500HP 441kw/600HP 588kw/800H...

    • API 7K Type DU Drill Pipe Slip Drill String Operation

      API 7K Type DU Drill Pipe Slip Drill String Ope...

      There are three types of DU series Drill Pipe Slips: DU, DUL and SDU. They are with large handling range and light weight. Thereinto, SDU slips have larger contacting areas on the taper and higher resistance strength. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Technical Parameters Mode Slip Body  Size(in) 4 1/2 5 1/2 7 DP OD DP OD DP OD in mm in mm in mm DU 2 3/8 60.3 3 1/2 88.9 4 1/...

    • DC Drive Drawworks of Drilling Rigs High Load Capacity

      DC Drive Drawworks of Drilling Rigs High Load C...

      Bearings all adopt roller ones and shafts are made of premium alloy steel. Driving chains with high accuracy and high strength are forced lubricated. The main brake adopts hydraulic disc brake, and the brake disc is water or air cooled. The auxiliary brake adopts electromagnetic eddy current brake(water or air cooled) or pneumatic push disc brake. Basic Parameters of DC Drive Drawworks: Model of rig JC40D JC50D JC70D Nominal drilling depth, m(ft) with...