API 7K Y SERIES SLIP TYPE ELEVATORS Pipe handling tools
The slip type elevator is an indispensable tool in holding and hoisting drilling pipes, casing and tubing in the oil drilling and well tripping operation. It is especially suitable for the hoisting of integrated tubing sub, integral joint casing and electric submersible pump column. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
Technical Parameters
| Model | Size | Rated Cap. | ||
| mm | KN | Short Tons | ||
| HYT | 60.3-88.9 | 2 3/8-3 1/2 | 1350 | 150 |
| YT | 33.4-88.9 | 1.315-3 1/2 | 675 | 75 |
| MYT | 33.4-73 | 1.315-2 7/8 | 360 | 40 |
| LYT | 26.7-52.4 | 1.05-2 1/16 | 180 | 20 |
| HYC | 88.9-193.7 | 3 1/2-7 5/8 | 1800 | 200 |
| MYC | 88.9-177.8 | 3 1/2-7 | 1125 | 125 |
| YC | 88.9-177.8 | 3 1/2-7 | 675 | 75 |
Related products
-
API 7K Type SLX Pipe Elevator for Drill String ...
Model SLX side door elevators with square shoulder are suitable for handling tubing casing, drill collar in oil and natural gas drilling, well construction. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) SLX-65 3 1/2-14 1/4 65 SLX-100 2 3/8-5 3/4 100 SLX-150 5 1/2-13 5/8 150 SLX-250 5 1/2-30 250 ...
-
API Type C Manual Tongs for Oil Drilling
Type Q60-273/48(2 3/8-10 3/4in)C Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and latch steps. Technical Parameters No.of Latch Lug Jaws Short Jaw Hinge Jaw Size Pange Rated Torque / KN·m mm in 1# 2 3/8-7 / 60.33-93.17 2 3/8-3.668 20 2# 73.03-108 2 7/8-4 1/4 3# 88.9-133.35 3 1/2-5 1/4 35 4# 133.35-177...
-
API Type LF Manual Tongs for Oil Drilling
TypeQ60-178/22(2 3/8-7in)LF Manual Tong is used for making up or breaking out the screws of drill tool and casing in drilling and well servicing operation. The handing size of this type tong can be adjusted by changing latch lug jaws and handling shoulders. Technical Parameters No.of Latch Lug Jaws Latch Stop Size Pange Rated Torque mm in KN·m 1# 1 60.32-73 2 3/8-2 7/8 14 2 73-88.9 2 7/8-3 1/2 2# 1 88.9-107.95 3 1/2-4 1/4 2 107.95-127 4 1...
-
API 7K Type DU Drill Pipe Slip Drill String Ope...
There are three types of DU series Drill Pipe Slips: DU, DUL and SDU. They are with large handling range and light weight. Thereinto, SDU slips have larger contacting areas on the taper and higher resistance strength. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Technical Parameters Mode Slip Body Size(in) 4 1/2 5 1/2 7 DP OD DP OD DP OD in mm in mm in mm DU 2 3/8 60.3 3 1/2 88.9 4 1/...
-
TYPE A DRILL COLLAR SLIPS (WOOLLEY STYLE)
PS SERIES PNEUMATIC SLIPS PS Series Pneumatic Slips are pneumatic tools which are suitable for all kind of rotary table for hoisting drill pipes and handling casings. They are mechanized operating with Strong hoisting force and large working range. They are easy to operate and dependable enough. At the same time they can not only reduce the workload but also improve the work efficiency. Technical Parameter Model rotary Table Size(in) pipe size(in) Ratedload Work P...
-
API 7K TYPE SD ROTARY SLIPS Pipe handling tools
Technical Parameters Model Slip Body Size(in) 3 1/2 4 1/2 SDS-S pipe size in 2 3/8 2 7/8 3 1/2 mm 60.3 73 88.9 weight Kg 39.6 38.3 80 Ib 87 84 80 SDS pipe size in 2 3/8 2 7/8 3 1/2 3 1/2 4 4 1/2 mm 60.3 73 88.9 88.9 101.6 114.3 w...