API 7K Type SLX Pipe Elevator for Drill String Operation
Model SLX side door elevators with square shoulder are suitable for handling tubing casing, drill collar in oil and natural gas drilling, well construction. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
Technical Parameters
| Model | Size(in) | Rated Cap(Short Tons) |
| SLX-65 | 3 1/2-14 1/4 | 65 |
| SLX-100 | 2 3/8-5 3/4 | 100 |
| SLX-150 | 5 1/2-13 5/8 | 150 |
| SLX-250 | 5 1/2-30 | 250 |
| SLX-350 | 4 1/2-14 | 350 |
Related products
-
TYPE 13 3/8-36 IN CASING TONGS
Q340-915/35TYPE 13 3/8-36 IN Casing Tongs is capable of making up or breaking out the screws of casing and casing coupling in drilling operation. Technical Parameters Model Size Pange Rated Torque mm in KN·m Q13 3/8-36/35 340-368 13 3/8-14 1/2 13 35 368-406 14 1/2-16 406-445 16-17 1/2 445-483 17 1/-19 483-508 19-20 508-546 20-12 1/2 546-584 21 1/2-23 610-648 24-25 1/2 648-686 25 1/2-27 686-724 27-28 1/2 724-762 28 1/2-30 ...
-
API 7K Type CDZ Elevator Wellhead Handling Tools
CDZ drilling pipe elevator is mainly used in the holding and hoisting of drilling pipe with 18 degree taper and tools in oil and natural gas drilling, well construction. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) CDZ-150 2 3/8-5 1/2 150 CDZ-250 2 3/8-5 1/2 250 CDZ-350 2 7/8-5 1/2 350 CDZ-5...
-
TYPE SPSINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...
-
API Type C Manual Tongs for Oil Drilling
Type Q60-273/48(2 3/8-10 3/4in)C Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and latch steps. Technical Parameters No.of Latch Lug Jaws Short Jaw Hinge Jaw Size Pange Rated Torque / KN·m mm in 1# 2 3/8-7 / 60.33-93.17 2 3/8-3.668 20 2# 73.03-108 2 7/8-4 1/4 3# 88.9-133.35 3 1/2-5 1/4 35 4# 133.35-177...
-
API 7K Type WWB Manual Tongs Pipe handling tools
Type Q60-273/48(2 3/8-10 3/4in)WWB Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws. Technical Parameters No.of Latch Lug Jaws Size Pange Rated Torque mm in KN·m 1# 60.3-95.25 2 3/8-3 3/4 48 2# 88.9-117.48 3 1/2-4 5/8 3# 114.3-146.05 4 1/2-4 5/8 4# 133,.35-184.15 5 1/2-5 3/4 5# 174.63-219.08 6 7/8...
-
TQ Hydraulic Power CASING TONG Wellhead tools
Technical Parameters Model TQ178-16 TQ340-20Y TQ340-35 TQ178-16Y TQ340-35Y TQ508-70Y Size range Mm 101.6-178 101.6-340 139.7-340 101.6-178 101.6-340 244.5-508 In 4-7 4-13 3/8 5 1/2-13 3/8 4-7 4-13 3/8 9 5/8-20 Hydraulic system Mpa 18 16 18 18 18 20 Psi 2610 2320 2610 2610 2610 2900