Technical Parameters
The slip type elevator is an indispensable tool in holding and hoisting drilling pipes, casing and tubing in the oil drilling and well tripping operation. It is especially suitable for the hoisting of integrated tubing sub, integral joint casing and electric submersible pump column. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Si...
Model DD center latch elevators with square shoulder are suitable for handling tubing casing, drill collar, drill pipe, casing and tubing. The load ranges from 150 tons 350 tons. The size ranges from 2 3/8 to 5 1/2 in. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) DP Casing Tubing DD-150 2 3/8-5 1/2 4...
Type Q89-324/75(3 3/8-12 3/4 in)B Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and handling shoulders. Technical Parameters No.of Latch Lug Jaws Latch Stop Size Pange Rated Torque in mm KN·m 5a 1 3 3/8-4 1/8 86-105 55 2 4 1/8-5 1/4 105-133 75 5b 1 4 1/4-5 1/4 108-133 75 2 5-5 3/4 127-146 75 3 6-6 3/4 152-171...
Type Q60-273/48(2 3/8-10 3/4in)WWB Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws. Technical Parameters No.of Latch Lug Jaws Size Pange Rated Torque mm in KN·m 1# 60.3-95.25 2 3/8-3 3/4 48 2# 88.9-117.48 3 1/2-4 5/8 3# 114.3-146.05 4 1/2-4 5/8 4# 133,.35-184.15 5 1/2-5 3/4 5# 174.63-219.08 6 7/8...
Q340-915/35TYPE 13 3/8-36 IN Casing Tongs is capable of making up or breaking out the screws of casing and casing coupling in drilling operation. Technical Parameters Model Size Pange Rated Torque mm in KN·m Q13 3/8-36/35 340-368 13 3/8-14 1/2 13 35 368-406 14 1/2-16 406-445 16-17 1/2 445-483 17 1/-19 483-508 19-20 508-546 20-12 1/2 546-584 21 1/2-23 610-648 24-25 1/2 648-686 25 1/2-27 686-724 27-28 1/2 724-762 28 1/2-30 ...
There are three types of DCS Drill Collar Slips: S, R and L. They can accommodate drill collar from 3 inch (76.2mm) to 14 inch (355.6mm) O.D. Technical Parameters slip type drill collar OD weight insert bowl No in mm kg Ib DCS-S 3-46 3/4-8 1/4 76.2-101.6 51 112 API or No.3 4-4 7/8 101.6-123.8 47 103 DCS-R 4 1/2-6 114.3-152.4 54 120 5 1/2-7 139.7-177.8 51 112 DCS-L 6 3/4-8 1/4 171.7-209.6 70 154 8-9 1/2 203.2-241.3 78 173 8 1/2-10 215.9-254 84 185 N...