API 7K Type CDZ Elevator Wellhead Handling Tools
CDZ drilling pipe elevator is mainly used in the holding and hoisting of drilling pipe with 18 degree taper and tools in oil and natural gas drilling, well construction. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
Technical Parameters
| Model | Size(in) | Rated Cap(Short Tons) |
| CDZ-150 | 2 3/8-5 1/2 | 150 |
| CDZ-250 | 2 3/8-5 1/2 | 250 |
| CDZ-350 | 2 7/8-5 1/2 | 350 |
| CDZ-500 | 3 1/2-5 1/2 | 500 |
Related products
-
TYPE SPSINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...
-
API 7K Y SERIES SLIP TYPE ELEVATORS Pipe handli...
The slip type elevator is an indispensable tool in holding and hoisting drilling pipes, casing and tubing in the oil drilling and well tripping operation. It is especially suitable for the hoisting of integrated tubing sub, integral joint casing and electric submersible pump column. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Si...
-
API 7K TYPE SDD MAUNAL TONGS to Drill String
No.of Latch Lug Jaws No.of Hinge Pin Hole Size Pange Rated Torque in mm 1# 1 4-5 1/2 101.6-139.7 140KN·m 5 1/2-5 3/4 139.7-146 2 5 1/2-6 5/8 139.7 -168.3 6 1/2-7 1/4 165.1-184.2 3 6 5/8-7 5/8 168.3-193.7 73/4-81/2 196.9-215.9 2# 1 8 1/2-9 215.9-228.6 9 1/2-10 3/4 241.3-273 2 10 3/4-12 273-304.8 3# 1 12-12 3/4 304.8-323.8 100KN·m 2 13 3/8-14 339.7-355.6 15 381 4# 2 15 3/4 400 80KN·m 5# 2 16 406.4 17 431.8 ...
-
API 7K DRILL COLLAR SLIPS for Drilling line Ope...
There are three types of DCS Drill Collar Slips: S, R and L. They can accommodate drill collar from 3 inch (76.2mm) to 14 inch (355.6mm) O.D. Technical Parameters slip type drill collar OD weight insert bowl No in mm kg Ib DCS-S 3-46 3/4-8 1/4 76.2-101.6 51 112 API or No.3 4-4 7/8 101.6-123.8 47 103 DCS-R 4 1/2-6 114.3-152.4 54 120 5 1/2-7 139.7-177.8 51 112 DCS-L 6 3/4-8 1/4 171.7-209.6 70 154 8-9 1/2 203.2-241.3 78 173 8 1/2-10 215.9-254 84 185 N...
-
API 7K Casing Slips for Drill Handling Tools
Casing Slips can accommodate casing from 4 1/2 inch to 30 inch (114.3-762mm) O.D. Technical Parameters Casing O.D In 4 1/2-5 5 1/2-6 6 5/8 7 7 5/8 8 5/8 Mm 114.3-127 139.7-152.4 168.3 177.8 193.7 219.1 Weight Kg 75 71 89 83.5 75 82 Ib 168 157 196 184 166 181 insert bowl No API or No.3 Casing O.D In 9 5/8 10 3/4 11 3/4 13 3/4 16 18 5/8 20 24 26 30 Mm 244.5 273.1 298.5 339.7 406.4 473.1 508 609.6 660.4 762 Weight Kg 87 95 118 117 140 166.5 174 201 220...
-
API 7K Type WWB Manual Tongs Pipe handling tools
Type Q60-273/48(2 3/8-10 3/4in)WWB Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws. Technical Parameters No.of Latch Lug Jaws Size Pange Rated Torque mm in KN·m 1# 60.3-95.25 2 3/8-3 3/4 48 2# 88.9-117.48 3 1/2-4 5/8 3# 114.3-146.05 4 1/2-4 5/8 4# 133,.35-184.15 5 1/2-5 3/4 5# 174.63-219.08 6 7/8...