TYPE A DRILL COLLAR SLIPS (WOOLLEY STYLE)
PS SERIES PNEUMATIC SLIPS
PS Series Pneumatic Slips are pneumatic tools which are suitable for all kind of rotary table for hoisting drill pipes and handling casings. They are mechanized operating with Strong hoisting force and large working range. They are easy to operate and dependable enough. At the same time they can not only reduce the workload but also improve the work efficiency.
Technical Parameter
| Model | rotary Table Size(in) | pipe size(in) | Ratedload | Work Pressure (Mpa) | Max Pressure (Mpa) |
| PS175 | 17 1/2 | 2 3/8-5 3/4 | 150 | 0.6-0.8 | 1 |
| PS205 | 20 1/2 | 2 3/8-5 3/4 | 250 | 0.6-0.8 | 1 |
| PS275 | 27 1/2 | 2 3/8-9 7/8 | 350 | 0.6-0.8 | 1 |
| PS375 | 37 1/2 | 2 3/8-14 | 500 | 0.6-0.8 | 1 |
| PS16 | 27 1/2、37 1/2、49 1/2 | 3 1/2-7 3/4 | 500 | 0.6-0.8 | 1 |
| PS | 23、27 1/2、37 1/2、49 1/2
Pin Drive |
2 3/8-5 1/2 | 250、350 | 0.6-0.8 | 1 |
| PS | For Slant Hole Pig | 2 7/8-13 3/8 | 250 | 0.6-0.8 | 1 |
| PS560 | 560mm
560mm Through Hole |
1.9-7 | 350 | 0.6-0.8 | 1 |
Related products
-
TYPE 13 3/8-36 IN CASING TONGS
Q340-915/35TYPE 13 3/8-36 IN Casing Tongs is capable of making up or breaking out the screws of casing and casing coupling in drilling operation. Technical Parameters Model Size Pange Rated Torque mm in KN·m Q13 3/8-36/35 340-368 13 3/8-14 1/2 13 35 368-406 14 1/2-16 406-445 16-17 1/2 445-483 17 1/-19 483-508 19-20 508-546 20-12 1/2 546-584 21 1/2-23 610-648 24-25 1/2 648-686 25 1/2-27 686-724 27-28 1/2 724-762 28 1/2-30 ...
-
API 7K TYPE SDD MAUNAL TONGS to Drill String
No.of Latch Lug Jaws No.of Hinge Pin Hole Size Pange Rated Torque in mm 1# 1 4-5 1/2 101.6-139.7 140KN·m 5 1/2-5 3/4 139.7-146 2 5 1/2-6 5/8 139.7 -168.3 6 1/2-7 1/4 165.1-184.2 3 6 5/8-7 5/8 168.3-193.7 73/4-81/2 196.9-215.9 2# 1 8 1/2-9 215.9-228.6 9 1/2-10 3/4 241.3-273 2 10 3/4-12 273-304.8 3# 1 12-12 3/4 304.8-323.8 100KN·m 2 13 3/8-14 339.7-355.6 15 381 4# 2 15 3/4 400 80KN·m 5# 2 16 406.4 17 431.8 ...
-
API 7K Type DD Elevator 100-750 tons
Model DD center latch elevators with square shoulder are suitable for handling tubing casing, drill collar, drill pipe, casing and tubing. The load ranges from 150 tons 350 tons. The size ranges from 2 3/8 to 5 1/2 in. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) DP Casing Tubing DD-150 2 3/8-5 1/2 4...
-
TYPE SJ SINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...
-
TYPE SPSINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...
-
API 7K Casing Slips for Drill Handling Tools
Casing Slips can accommodate casing from 4 1/2 inch to 30 inch (114.3-762mm) O.D. Technical Parameters Casing O.D In 4 1/2-5 5 1/2-6 6 5/8 7 7 5/8 8 5/8 Mm 114.3-127 139.7-152.4 168.3 177.8 193.7 219.1 Weight Kg 75 71 89 83.5 75 82 Ib 168 157 196 184 166 181 insert bowl No API or No.3 Casing O.D In 9 5/8 10 3/4 11 3/4 13 3/4 16 18 5/8 20 24 26 30 Mm 244.5 273.1 298.5 339.7 406.4 473.1 508 609.6 660.4 762 Weight Kg 87 95 118 117 140 166.5 174 201 220...