API 7K DRILL COLLAR SLIPS for Drilling line Operation
There are three types of DCS Drill Collar Slips: S, R and L. They can accommodate drill collar from 3 inch (76.2mm) to 14 inch (355.6mm) O.D.
Technical Parameters
| slip type | drill collar OD | weight | insert bowl No | ||
| in | mm | kg | Ib | ||
| DCS-S | 3-46 3/4-8 1/4 | 76.2-101.6 | 51 | 112 | API or No.3 |
| 4-4 7/8 | 101.6-123.8 | 47 | 103 | ||
| DCS-R | 4 1/2-6 | 114.3-152.4 | 54 | 120 | |
| 5 1/2-7 | 139.7-177.8 | 51 | 112 | ||
| DCS-L | 6 3/4-8 1/4 | 171.7-209.6 | 70 | 154 | |
| 8-9 1/2 | 203.2-241.3 | 78 | 173 | ||
| 8 1/2-10 | 215.9-254 | 84 | 185 | No.2 | |
| 9 1/4-11 1/4 | 235-285.7 | 90 | 198 | ||
| 11-12 3/4 | 279.4-323.9 | 116 | 256 | No.1 | |
| 12-14 | 304.8-355.6 | 107 | 237 | ||
Related products
-
API 7K Type DU Drill Pipe Slip Drill String Ope...
There are three types of DU series Drill Pipe Slips: DU, DUL and SDU. They are with large handling range and light weight. Thereinto, SDU slips have larger contacting areas on the taper and higher resistance strength. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Technical Parameters Mode Slip Body Size(in) 4 1/2 5 1/2 7 DP OD DP OD DP OD in mm in mm in mm DU 2 3/8 60.3 3 1/2 88.9 4 1/...
-
API 7K Type DD Elevator 100-750 tons
Model DD center latch elevators with square shoulder are suitable for handling tubing casing, drill collar, drill pipe, casing and tubing. The load ranges from 150 tons 350 tons. The size ranges from 2 3/8 to 5 1/2 in. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) DP Casing Tubing DD-150 2 3/8-5 1/2 4...
-
API 7K Y SERIES SLIP TYPE ELEVATORS Pipe handli...
The slip type elevator is an indispensable tool in holding and hoisting drilling pipes, casing and tubing in the oil drilling and well tripping operation. It is especially suitable for the hoisting of integrated tubing sub, integral joint casing and electric submersible pump column. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Si...
-
API 7K Safety Clamps for Drilling String Operation
Safety Clamps are tools for handling flush joint pipe and drill collar. There are three types of safety clamps: Type WA-T, Type WA-C and Type MP. Technical Parameters Model pipe O.D.(in) No. of Chain links Model pipe O.D.(in) No. ofChain links WA-T 1 1/8-2 4 MP-S 2 7/8-4 1/8 7 4-5 8 MP-R 4 1/2-5 5/8 7 2 1/8-3 1/4 5 5 1/2-7 8 6 3/4-8 1/4 9 3 1/2-4 1/2 6 9 1/4-10 1/2 10 MP-M 10 1/2-11 1/2 11 WA-C 3 1/2-4 5/8 7 11 1/2-12 1/2 12 4 1/2-5 5/8 8 12 1/2...
-
API 7K TYPE B MANUAL TONGS Drill String Handling
Type Q89-324/75(3 3/8-12 3/4 in)B Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and handling shoulders. Technical Parameters No.of Latch Lug Jaws Latch Stop Size Pange Rated Torque in mm KN·m 5a 1 3 3/8-4 1/8 86-105 55 2 4 1/8-5 1/4 105-133 75 5b 1 4 1/4-5 1/4 108-133 75 2 5-5 3/4 127-146 75 3 6-6 3/4 152-171...
-
TYPE SPSINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...