VARCO TDS-11SA PH-75 Back-up Tong Clamp Cylinder Assembly for Oilfield Rigs
| 11085 | RING,HEAD,CYLINDER |
| 94764 | CYLINDER,C-BAL,5.0″*SCD* |
| 110186 | CYLINDER,ACTUATOR,IBOP ASSY TDS9S |
| 110687 | CYLINDER, 4″, COUNTER BALANCE |
| 118332 | TUBE,CYLINDER,LINK-TILT,ASSY |
| 118333 | TUBE,CYLINDER,LINK-TILT,ASSY |
| 118334 | TUBE,CYLINDER,LINK-TILT,ASSY |
| 118511 | MANIFOLD,ASSY,CLAMP,CYLINDER |
| 121979 | RETAINER: BUSHING CYLINDER MOUNT |
| 125594 | CYLINDER,HYD,IBOP,ACTUATOR,ASSY,PH100 |
| 30125057 | STAB, GUIDE, CYLINDER, 6.25-7.25 |
| 30125833 | MANIFOLD,PH100,CLAMP CYLINDER ASSY (STK @ LAFAYETTE, LA) |
| 30125938 | PIN,CLEVIS,CRANK CYLINDER(ms15,h900) |
| 30157287 | CLAMP,CYLINDER,ASSY,PH75 |
| 30172154 | PIN,CYLINDER MOUNTING, PH-50 |
| 30174224 | ASSY,ALIGN,CYLINDER ,TDS-8/1000 |
| 30178847 | PIN,HINGE,CLAMP CYLINDER,GATE PH75 |
| 1030-14-0004 | BEARING,ROLLER CYLINDERICAL |
| 108894-B32 | KIT,BODY-SEAL,PARKER-CYLINDER*SCD* |
| 108894-Y2 | GLAND WRENCH PARKER CYLINDER |
| 110687-SK | SEAL,CYLINDER,C’BAL,REPAIR-PACK,TDS9S |
| 114090-500 | Balanced hydraulic cylinder accumulator to baffle pipeline |
| 118463-2 | MANIFOLD,ASSY,LINK TILT CYLINDER(ALUM) |
| 120557-LT | CYLINDER, DOUBLE-ROD (LOW-TEMP) |
| 121979+30 | RETAINER, BUSHING, CYLINDER,MOUNT |
| 30160444-SK | KIT, SEAL, CLAMP CYLINDER ASSY |
| 30182473 | Clevis, Proprietary Cylinder Torque Iron RoughnecksST-120 |
| 3060 | Port Extension Tube,Grabber Cylinder |
| 18109 | Stem,Breakaway Mount,Cylinder |
| 30171518 | Oil cylinder |
| 2.3.06.004 | Brake cylinder (low temperature) |
| 30154386 | Cylinder pin |
| 2.3.03.011 | IBOP oil cylinder |
| 2.3.03.012 | IBOP oil cylinder |
| 926 | Hydraulic cylinder, single stage, 2.5″ diameter , 1.25″ rod, 24″ stroke |
| 931 | CYLINDER-LINK TILT-FOR MODEL: HC 500 TOP DRIVE–TESCO |
| 3040 | Oil cylinder |
| 3056 | Cylinder housing |
| 6027 | CYLINDER, MODIFIED, HMI LINK TILT |
| 7972 | Oil cylinder |
| 9520 | Oil cylinder |
| 12951 | Counterbalance cylinder lug |
| 16499 | Gripper hydraulic cylinder assembly, for HMI model GP (Manual 16499) |
| 810429 | Bushing,Pipe,Cylinder Lock,EXIHXI |
| 1320014 | Oil cylinder |
| 5000629 | hydro cylinder “Link tilt” “Extend |
| 5005277 | Oil cylinder |
| 5006660 | Oil cylinder |
| 5008073 | Oil cylinder |
| 5061338 | PIN,MOUNT,CYLINDER,TORQUE BUSHING,EXI |
| 3040-1 | The hydraulic cylinder of the stopper |
| 3056-1 | Cylinder housing |
| 5019135-1 | Oil cylinder |
| 7177-1 | Hydraulic Cylinder, Single Stage, 3″ Diameter, 1.25″ Rod, 8″ Stroke / Cylinder,Hyd,Sngl Stage,3 “Bore,1.25 “Rod,8 “Stroke |
| 810428-1 | Extensiion,Port,Cylinder Lock,Pipe Handler,350-EXI-600 |
| 8860-2 | SEAL KIT,GRABBER CYLINDER,ALL |
| 30184647 | CYLINDER,CARRIAGE HOIST,ST-80CL |
| M361000200 | CYLINDER ASSEMBLY,ADJUSTABLE HYDRAULIC |
| AR03-12C | PIN,LINKAGE CYLINDER |
| 30183782 | CYLINDER,HYDRAULIC,3-1/4″BOREx24-1/2″STROKE |
| M361000199 | CLEVIS,CYLINDER MANIFOLD,ST-80CL |
| P361000032 | CYLINDER,ADJUSTABLE HYDRAULIC,3-1/4″BORE X 17-13/16″STROKE |
| 30160444 | CLAMP CYLINDER ASSY |
| 30158188-MJ | Tilt cylinder connecting rod mold |
| 30176458 | BODY CYLINDER |
| 30160684-1 | TORQUE CYLINDER |
| 30160685-l | TORQUE CYLINDER |
| M614001956 | HOIST CYLINDER |
| 30179558 | CYLINDER,DAMPER |
| M364000940 | CYLINDER BUSHING |
| 94780 | CYLINDER ASSY |
| 30125801-LT | ASSY, CYLINDER, BYDRAULlC, LlFT (LOW TEMP) |
| 30181022 | DUPLEX CYLINDER |
| 30180580 | HOIST CYLINDER(SHORT) |
| 30176815 | HOIST CYLINDER(TALL) |
| 30170580 | CYLINDER,HOIST |
| 10959539-00l | CYLINDER,DAMPER |
| 59026-P-23-N-032-C | HOSE ASSY,LWR PORT TORQUE CYLINDER TO PRV’MO’ |
| 59047-P-29-J-063-C | HOSE ASSY,‘LC’MANIFOLD TO LOWER CLAMP CYLINDER |
| 59024-P-29-0-065-C | HOSE ASSY,‘UC′MANIFOLD TO UPPER CLAMP CYLINDER |
| 59047-P-29-M-075-C | HOSE ASSY,‘LU’MANIFOLD TO LOWER UNCLAMP CYLINDER |
| 59043-P-29-0-074-C | HOSE ASSY,‘UU’MANIFOLD TO UPPER UNCLAMP CYLINDER |
| 30125050 | Assembly, Clamp Cylinder PH-100 (TDS-8S) |
| 10679987-001 | PIN,HYDRAULIC CYLINDER CLEVIS |
| M614004408 | CLEVIS,ALIGNMENT CYLINDER |
| 30172176-BSC | PIN, CLEVIS, CYLINDER COUNTERBALANCE |
| P614000068 | CYCYLINDER,HYDRAULIC1INDER,HYDRAULIC |
| M614003688 | SET, CYLINDER COMPONENT |
| M614003685 | PIN,CYLINDER |
| H614003358 | PIN,CYLINDER |
| 59344P1700041 | HOSE ASSY , RLA “H” TO ENABLE CYLINDER PISTON END |
| M614003358 | PIN, CYLINDER |
| 30157297 | HANGER.CLAMP CYLINDER |
| 11075 | CYLINDER HEAD |
| 30157221 | BODY ,CLAMPCYLINDER |
| 30151882 | Cylinder Assembly |
| 30174224-DWG | Drawing, Alignment Cylinder Assy |
| INT-027-0926 | Hydraulic Cylinder INT-027-0926 |
| 94780-DWG | Drawing, Cylinder Assembly |
| 125594-500 | Cylinder, Hydraulic, IBOP |
| 30125050-DWG | Drawing, Clamp Cylinder Assembly |
| 30125801-DWG | Drawing, Cylinder Assembly |
| 30125801 | Cylinder Assembly, Lift |
| 125799 | Lift Cylinder |
| 30175964 | Kit, Alignment Cylinder Accumulator |
| 820323 | Stem,Breakaway,Mount,Cylinder,35mm *In Stock* |
| 3848 | 189 – CYLINDER,CLAMPBOX,HMI *In Stock* |
| 10656103-001 | CYLINDER ASSEMBLY,COUNTERBALANCE -5” |
| 10654571-001 | CYLINDER ASSEMBLY,COUNTERBALANCE-5″ |
| 30180168 | CYLINDER,CARRIAGE EXTEND |
| M614003115 | CYLINDER,HYDRAULIC |
| 30177871 | CYLINDER,HYDRAULIC |
| M614001826 | ASSY,CLAMP CYLINDER,PH-65 |
| 20557-501 | CYLINDER, DOUB LE ROD WITH LIP SEALS |
| 20557-LT | CYLINDER, DOUB LE ROD WITH LIP SEALS |
| 20557-500 | CYLINDER, DOUB LE ROD WITH LIP SEALS |
| M614002346 | MANIFOLD ASSEMBLY,CLAMP CYLINDER |
| M614001821 | GATE,CLAMP CYLINDER |
| M614001819 | CYLINDER HEAD |
| M614001814 | BODY,CLAMP CYLINDER |
| M614002347-2 | MANIFOLD,CLAMP CYLINDER |
| 110703-SK | Seals kit for Counterbalance Cylinder |
Related products
-
Varco TDS Series Drilling Rig Spare Parts ̵...
These are high-quality spare parts designed for Varco TDS series top drive systems, covering components like knurled rollers, spin clamp glands, piston assemblies, directional control valves, manifold tube assemblies, filters, shot pins, bearing retainers, and retrofit kits. Manufactured to meet API standards, they ensure reliable performance and long service life in oilfield drilling operations. 30160614 ROLLER,KNURLED 30160657 GLAND,SPIN CLAMP 30160658 ASSY, PISTON, SW CLAMP 30160...
-
Traveling Block of oil drilling rigs high weigh...
Technical Features： • The Traveling Block is an important key equipment in the workover operation. Its main function is to form a pulley block by the sheaves of the Traveling Block and the mast , double the pulling force of the drilling rope, and bear all the downhole drill pipe or oil pipe and workover instruments through the hook. • The sheave grooves are quenched to resist wear and extend their service life. • The sheaves and bearings are interchangeable with th...
-
TESCO Top Drive parts ,TESCO TDS PARTS,TESCO CABLE
Product Name:Top Drive Parts Brand: TESCO Country of origin: USA,CHINA Applicable models:HXI HCI HS ECI EMI EXI Part number:5008547,5008176,5024394,5061345 Price and delivery: Contact us for a quotation
-
VARCO SERVICE LOOP KIT, ELECTRICAL:92 feet, 101...
946963-010 CABLE-3 CONDUCTOR, 14 AWG, UNARMORED, EXANE NOV 947642-006:58P CONN-CABLE CLAMP, SHELL MS#14 NOV M614000129-200-25-3-B SERVICE LOOP NOV M614003360-1 Assembly Cable Ph100 NOV P614000139 Cable Pipe Handler Retention NOV 30183284-200-25-3-B Signal cable Varco TDS-11 NOV 30181755-100-B Signal cable TDS 11 Consol 1 NOV 30181756-100-B Siqnal kabeli TDS 11 Consol 2 NOV 30175021-86-200 SERVICE LOOP 30175021-86-200 Varco TDS-11SA NOV 30175019-86- 200 SERVICE LOO...
-
VARCO TESCO Top Drive Rotating Link Adaptor Spa...
92426 Protector,Pipe,Rubber,4-1/2″X6-3/4″,TDS-11,Varco 92426 92654 VALVE,CHECK,IN-LINE,.187DIA 92730 RING,SENSOR,ROTATION 94677 Wire-Rope .125 *Scd* 94679 Sleeve Oval Compression 1/8″ TDS* 94764 CYLINDER,C-BAL,5.0″*SCD* 94821 (MT)PLUG,MODIFIED, 3″NPT,W/.38NPT HOLE 94990 OIL-SEAL,BIG-BORE,TDS-S 95523 SHACKLE,ANCHOR,25-TON*SCD* 96290 TP PCB,+5V REGULATOR BD 96439 SEAL,U-CUP,4×4.5x.25 96575 Серьга 97575 VALVE,THERMOSTATIC,3-WAY ...
-
API Type C Manual Tongs for Oil Drilling
Type Q60-273/48(2 3/8-10 3/4in)C Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and latch steps. Technical Parameters No.of Latch Lug Jaws Short Jaw Hinge Jaw Size Pange Rated Torque / KN·m mm in 1# 2 3/8-7 / 60.33-93.17 2 3/8-3.668 20 2# 73.03-108 2 7/8-4 1/4 3# 88.9-133.35 3 1/2-5 1/4 35 4# 133.35-177...