Traveling Block of oil drilling rigs high weight lifting
Technical Features：
• The Traveling Block is an important key equipment in the workover operation. Its main function is to form a pulley block by the sheaves of the Traveling Block and the mast , double the pulling force of the drilling rope, and bear all the downhole drill pipe or oil pipe and workover instruments through the hook.
• The sheave grooves are quenched to resist wear and extend their service life.
• The sheaves and bearings are interchangeable with those of their matching crown block.
Technical Parameters：
|
Model |
YC135 |
YC170 |
YC225 |
YC315 |
YC450 |
YC585 |
YC675 |
|
|
Max. hook load kN (kips) |
1350 (300000) |
1700 (374000) |
2250 (500000) |
3150 (700000) |
4500 (1000000) |
5850 (1300000) |
6750 (1500000) |
|
|
Dia. of wire line mm(in) |
29 (1 1/8) |
29 (1 1/8) |
32 (1 1/4) |
35 (1 3/8) |
38 (1 1/2) |
38 (1 1/2) |
45 (1 3/4) |
|
|
Number of sheaves |
4 |
5 |
5 |
6 |
6 |
6 |
7 |
|
|
O.D. of sheaves mm (in) |
762 (30) |
1005 (39.6) |
1120 (44.1) |
1270 (50.0) |
1524 (60) |
1524 (60) |
1524 (60) |
|
|
Overall dimension |
Length mm(in) |
1353 (53 1/4) |
2020 (83 5/8) |
2294 (90 5/16) |
2690 (106) |
3110 (122 1/2) |
3132 (123 1/3) |
3410 (134 1/3) |
|
Width mm(in) |
595 (23 7/16) |
1060 (41 1/8) |
1190 (46 7/8) |
1350 (53 1/8) |
1600 (63) |
1600 (63) |
1600 (63) |
|
|
Height mm(in) |
840 (33) |
620 (33) |
630 (24 3/4) |
800 (31 1/2) |
840(33) |
840(33) |
1150 (45) |
|
|
Weight, kg(lbs) |
1761 (3882) |
2140 (4559) |
3788 (8351) |
5500 (12990) |
8300 (19269) |
8556 (18863) |
10806 (23823) |
|
Related products
-
Hydraulic Double RAM Preventer Oilfield Well Co...
Our Hydraulic Pressure Double RAM Preventer is a core well control equipment specifically designed for oilfield well drilling, completion, and workover operations, fully adhering to API 16A industry standards. As a critical safety barrier in well control systems, it is installed at the wellhead to effectively prevent blowout accidents caused by uncontrolled fluid backflow, kicks, and other emergencies, protecting the safety of drilling personnel, equipment, and the surrounding environment. Th...
-
Crown Block of Oil/Gas Drilling Rig with Pulley...
Technical Features: • The sheave grooves are quenched to resist wear and extend its service life. • The kick-back post and rope guard board prevent the wire rope from jumping out or falling out of the sheave grooves. • Equipped with safety chain anti-collision device. • Equipped with a gin pole for repairing the sheave block. • Sand sheaves and auxiliary sheave blocks are provided in accordance with users’ requirements. •The crown sheaves are completely interchangeab...
-
Heavy-Duty Drawworks for Enhanced Drilling Effi...
Model of rig JC40 JC50 JC70 Nominal drilling depth, m(ft) withФ114mm(4-1/2 ”)DP 2500-4000(8200-13100) 3500-5000(11500-16400) 4500-7000(14800-23000) with Ф127mm(5″) DP 2000-3200(6600-10500) 2800-4500(9200-14800) 4000-6000(13100-19700) 735 (1000) 1100 (1500) 1470 (2000) Rated power, kW (hp) 275(61.79) 340(76.40) 485(108.98) Max. fast line pull, kN(kips) 32 (1-1/4) 35 (1-3/8) 38 (1-1/2) Dia. of drilling line,...
-
AC Variable Frequency Drive Drawworks
• The main components of drawworks are AC variable frequency motor, gear reducer, hydraulic disc brake, winch frame, drum shaft assembly and automatic driller etc, with high gear transmission efficiency. • The gear is thin oil lubricated. • Drawwork is of single drum shaft structure and the drum is grooved. Compared with similar drawworks, it is of many merits, such as simple structure, small volume, and light weight. • It’s AC variable frequency motor drive and step...
-
YC160 Traveling Block Drilling Rig Hoisting Sys...
OPERATING CONDITIONS - Environment: Outdoor, may be exposed to dust, sand, and weather. - Ambient temperature range: –30°C to +50°C (to be confirmed according to climatic version). - Lubrication: According to the manufacturer’s maintenance manual. - Periodic inspection: At least every 6 months or based on accumulated operating hours, as per the service schedule. Parameter Value Model YC160 Maximum static hook load 1600 kN Outer diameter 30″ (762 mm) Steel cable diameter...
-
F Series Mud Pump for oil field fluid control
F series mud pumps are firm and compact in structure and small in size, with good functional performances, which can adapt to drilling technological requirements such as oilfield high pump pressure and large displacement etc. The F series mud pumps can be maintained at lower stroke rate for their long stroke, which effectively improves the feeding water performance of mud pumps and prolongs the service life of the fluid end. The suction stabilizer, with advanced stru...