Crown Block of Oil/Gas Drilling Rig with Pulley and Rope
Technical Features:
• The sheave grooves are quenched to resist wear and extend its service life.
• The kick-back post and rope guard board prevent the wire rope from jumping out or falling out of the sheave grooves.
• Equipped with safety chain anti-collision device.
• Equipped with a gin pole for repairing the sheave block.
• Sand sheaves and auxiliary sheave blocks are provided in accordance with users’ requirements.
•The crown sheaves are completely interchangeable with those of its matching traveling block.
Technical Parameters：
|
Model |
TC90 |
TC158 |
TC170 |
TC225 |
TC315 |
TC450 |
TC585 |
TC675 |
|
| Max. hook load kN (lbs) |
900 (200,000) |
1580 (350,000) |
1700 (37,400) |
2250 (500,000) |
3150 (700,000) |
4500 (1,000,000) |
5850 (1,300,000) |
6750 (1,500,000) |
|
|
Dia. of wire line mm(in) |
26(1) |
29(1 1/8) |
29(1 1/8) |
32(1 1/4) |
35(1 3/8) |
38(1 1/2) |
38(1 1/2) |
45(1 3/4) |
|
|
O.D. of sheaves mm(in) |
762(30) |
915(36) |
1005(40) |
1120(44) |
1270(50) |
1524(60) |
1524(60) |
1524(60) |
|
|
Number of sheaves |
5 |
6 |
6 |
6 |
7 |
7 |
7 |
8 |
|
|
Overall dimension |
Length mm(in) |
2580 (101 9/16) |
2220 (87 7/16) |
2620 (103 5/32) |
2667 (105) |
3192 (125 11/16) |
3140 (134 1/4) |
3625 (142 3/4) |
4650 (183) |
|
Width mm(in) |
2076 (81 3/4) |
2144 (84 7/16) |
2203 (86 3/4) |
2709 (107) |
2783 (110) |
2753 (108 3/8) |
2832 (111 1/2) |
3340 (131 1/2) |
|
|
Height mm(in) |
1578 (62 1/8) |
1813 (71 3/8) |
1712 (67) |
2469 (97) |
2350 (92 1/2) |
2420 (95 3/8) |
2580 (101 5/8) |
2702 (106 3/8) |
|
|
Weight, kg(lbs) |
3000 (6614) |
3603 (7943) |
3825 (8433) |
6500 (14330) |
8500 (18739) |
11105 (24483) |
11310 (24934) |
13750 (30314) |
|
Related products
-
Mechanical Drive Drawworks on Drilling Rig
• Drawworks positive gears all adopt roller chain transmission and negative ones adopt gear transmission. • Driving chains with high accuracy and high strength are forced lubricated. • The drum body is grooved. The low-speed and high-speed ends of drum are equipped with ventilating air tube clutch. The main brake adopts belt brake or hydraulic disc brake, while the auxiliary brake adopts configured electromagnetic eddy current brake(water or air cooled). Basic Parame...
-
3NB Series Mud Pump for oil field fluid control
Product Introduction: 3NB series mud pump includes：3NB-350, 3NB-500, 3NB-600, 3NB-800, 3NB-1000, 3NB-1300, 3NB-1600, 3NB-2200. 3NB series mud pumps are inclusive of 3NB-350, 3NB-500, 3NB-600, 3NB-800, 3NB-1000, 3NB-1300, 3NB-1600 and 3NB-2200. Model 3NB-350 3NB-500 3NB-600 3NB-800 Type Triplex single acting Triplex single acting Triplex single acting Triplex single acting Output power 257kw/350HP 368kw/500HP 441kw/600HP 588kw/800H...
-
Rotary Table for Oil Drilling Rig
Technical Features： • The transmission of rotary table adopts spiral bevel gears which have strong bearing capacity, smooth operation and long service life. • The shell of rotary table uses cast-weld structure with good rigidity and high precision. • The gears and bearings adopt reliable splash lubrication. • The barrel type structure of the input shaft is easy to repair and replace. Technical Parameters: Model ZP175 ZP205 ZP275 ZP375 ZP375Z ZP495 ...
-
Heavy-Duty Drawworks for Enhanced Drilling Effi...
Model of rig JC40 JC50 JC70 Nominal drilling depth, m(ft) withФ114mm(4-1/2 ”)DP 2500-4000(8200-13100) 3500-5000(11500-16400) 4500-7000(14800-23000) with Ф127mm(5″) DP 2000-3200(6600-10500) 2800-4500(9200-14800) 4000-6000(13100-19700) 735 (1000) 1100 (1500) 1470 (2000) Rated power, kW (hp) 275(61.79) 340(76.40) 485(108.98) Max. fast line pull, kN(kips) 32 (1-1/4) 35 (1-3/8) 38 (1-1/2) Dia. of drilling line,...
-
30180389 10490415-315 10490416-756 122599 TDS8S...
76717 LINK,PEAR (P) 117078 U-BOLT,LINKTILT,250T,TDS9S 117976 BEAM,LINK,TIEBACK (MTO) 118332 TUBE,CYLINDER,LINK-TILT,ASSY 118333 TUBE,CYLINDER,LINK-TILT,ASSY 118334 TUBE,CYLINDER,LINK-TILT,ASSY 118336 PIN,ACTUATOR,LINK 119122 CLAMP,LINK 120165 CLAMP,LINK-TILT,500T,TDS9 120660 CLAMP,LINK(350 TON),MS17 120700 ADAPTER,ASSY,LINK,ROTATING 121492 CRANK,TILT,LINK 121784 ACTUATOR,ASSY,LINK-TILT 122270 TIEBACK,LINK 122599 CLAMP,LINK,250T,PH50 30122367 U-BOLT,.75-UNC,500T,LINKTILT,PH50 30125094 TUBE ASS...
-
Heavy Duty TDS-11SA Drawworks for Top Drive Parts
Engineered for Reliability, Built for Performance Maximize your drilling efficiency with our JC Series Drawworks – designed to deliver unmatched power, durability, and precision in the most demanding drilling environments. Whether you’re working on shallow wells or deep exploration projects, our drawworks provide the strength and control you need to keep operations running smoothly. Ideal for: Onshore & Offshore Drilling Rigs Deep & Ultra-Deep Well Projects High-Torque, High-Sp...