AC Variable Frequency Drive Drawworks
• The main components of drawworks are AC variable frequency motor, gear reducer, hydraulic disc brake, winch frame, drum shaft assembly and automatic driller etc, with high gear transmission efficiency.
• The gear is thin oil lubricated.
• Drawwork is of single drum shaft structure and the drum is grooved. Compared with similar drawworks, it is of many merits, such as simple structure, small volume, and light weight.
• It’s AC variable frequency motor drive and stepless speed regulation in whole course, with high power and wide speed adjustable range.
• The main brake adopts hydraulic disc brake, and the brake disc is water or air cooled.
• The auxiliary brake is of motor dynamic braking.
• Equipped with independent motor automatic drilling system.
Basic Parameters of AC Variable Frequency Drive Single Shaft Drawworks:
|
Model of rig |
JC40DB |
JC50DB |
JC70DB |
|
|
Nominal drilling depth, m(ft) |
with Ф114mm(4 1/2”)DP |
2500-4000(8200-13100) |
3500-5000(11500-16400) |
4500-7000(14800-23000) |
|
with Ф127mm(5”) DP |
2000-3200(6600-10500) |
2800-4500(9200-14800) |
4000-6000(13100-19700) |
|
|
Rated power, kW (hp) |
735 (1000 ) |
1100 (1500 ) |
1470 (2000 ) |
|
|
Qty. of motors ×rated power, kW (hp) |
2×400(544)/1×800(1088) |
2×600(816) |
2×800(1088) |
|
|
Rated speed of motor, r/min |
660 |
660 |
660 |
|
|
Dia. of drilling line, mm(in) |
32 (1 1/4) |
35 (1 3/8) |
38 (1 1/2) |
|
|
Max. fast line pull, kN (kips) |
275(61.79) |
340(76.40) |
485(108.36) |
|
|
Main drum size (D×L), mm (in) |
640×1139(25 1/4×44 7/8 ) |
685×1138(27 ×44 7/8 ) |
770×1439(30 ×53 1/2 ) |
|
|
Brake disc size (D×W), mm(in) |
1500×76 (59 ×3) |
1600×76 (63×3) |
1520×76 (59 3/4) |
|
|
Motor power of automatic driller, kW (hp) |
37(50) |
45(60) |
45(60) |
|
|
Transmission type |
Double-stage gear transmission |
Double-stage gear transmission |
Double-stage gear transmission |
|
|
Auxiliary brake |
Dynamic braking |
Dynamic braking |
Dynamic braking | |
|
Overall dimension(L×W×H),mm(in) |
4230×3000×2630 (167×118×104) |
5500×3100×2650 (217×122×104) |
4570×3240×2700 (180×128×106) |
|
|
重量Weight, kg(lbs) |
18600(41005) |
22500(49605) |
30000(66140) |
|
Related products
-
Mechanical Drive Drawworks on Drilling Rig
• Drawworks positive gears all adopt roller chain transmission and negative ones adopt gear transmission. • Driving chains with high accuracy and high strength are forced lubricated. • The drum body is grooved. The low-speed and high-speed ends of drum are equipped with ventilating air tube clutch. The main brake adopts belt brake or hydraulic disc brake, while the auxiliary brake adopts configured electromagnetic eddy current brake(water or air cooled). Basic Parame...
-
Hook Block Assembly of Drill Rig high weight li...
1. The hook block adopt the integrated design. The traveling block and the hook are connected by the intermediate bearing body, and the big hook and the cruiser can be separately repaired. 2. The inner and outer springs of the bearing body are reversed in opposite directions, which overcomes the torsion force of a single spring during compression or stretching. 3. The overall size is small, the structure is compact, and the combined length is shortened, which is suit...
-
F Series Mud Pump for oil field fluid control
F series mud pumps are firm and compact in structure and small in size, with good functional performances, which can adapt to drilling technological requirements such as oilfield high pump pressure and large displacement etc. The F series mud pumps can be maintained at lower stroke rate for their long stroke, which effectively improves the feeding water performance of mud pumps and prolongs the service life of the fluid end. The suction stabilizer, with advanced stru...
-
Crown Block of Oil/Gas Drilling Rig with Pulley...
Technical Features: • The sheave grooves are quenched to resist wear and extend its service life. • The kick-back post and rope guard board prevent the wire rope from jumping out or falling out of the sheave grooves. • Equipped with safety chain anti-collision device. • Equipped with a gin pole for repairing the sheave block. • Sand sheaves and auxiliary sheave blocks are provided in accordance with users’ requirements. •The crown sheaves are completely interchangeab...
-
Traveling Block of oil drilling rigs high weigh...
Technical Features： • The Traveling Block is an important key equipment in the workover operation. Its main function is to form a pulley block by the sheaves of the Traveling Block and the mast , double the pulling force of the drilling rope, and bear all the downhole drill pipe or oil pipe and workover instruments through the hook. • The sheave grooves are quenched to resist wear and extend their service life. • The sheaves and bearings are interchangeable with th...
-
Elevator Link for hanging Elevator from TDS
• Designing and manufacturing conform to API Spec 8C standard and SY/T5035 relevant technical standards etc.; • Select high-class alloy steel die to forge molding; • Intensity check uses finite element analysis and electrical measuring method stress test. There are one-arm elevator link and two-arm elevator link; Adopt two-stage shot blasting surface strengthening technology. One-arm Elevator Link Model Rated load (sh.tn) Standard working le...