TYPE 13 3/8-36 IN CASING TONGS
Q340-915/35TYPE 13 3/8-36 IN Casing Tongs is capable of making up or breaking out the screws of casing and casing coupling in drilling operation.
Technical Parameters
| Model | Size Pange | Rated Torque | |
| mm | in | KN·m | |
|
Q13 3/8-36/35 |
340-368 | 13 3/8-14 1/2 |
13 35 |
| 368-406 | 14 1/2-16 | ||
| 406-445 | 16-17 1/2 | ||
| 445-483 | 17 1/-19 | ||
| 483-508 | 19-20 | ||
| 508-546 | 20-12 1/2 | ||
| 546-584 | 21 1/2-23 | ||
| 610-648 | 24-25 1/2 | ||
| 648-686 | 25 1/2-27 | ||
| 686-724 | 27-28 1/2 | ||
| 724-762 | 28 1/2-30 | ||
| 762-800 | 30-31 1/2 | ||
| 800-838 | 31 1/2-33 | ||
| 838-876 | 33-34 1/2 | ||
| 876-915 | 34 1/2-36 | ||
Related products
-
API 7K DRILL COLLAR SLIPS for Drilling line Ope...
There are three types of DCS Drill Collar Slips: S, R and L. They can accommodate drill collar from 3 inch (76.2mm) to 14 inch (355.6mm) O.D. Technical Parameters slip type drill collar OD weight insert bowl No in mm kg Ib DCS-S 3-46 3/4-8 1/4 76.2-101.6 51 112 API or No.3 4-4 7/8 101.6-123.8 47 103 DCS-R 4 1/2-6 114.3-152.4 54 120 5 1/2-7 139.7-177.8 51 112 DCS-L 6 3/4-8 1/4 171.7-209.6 70 154 8-9 1/2 203.2-241.3 78 173 8 1/2-10 215.9-254 84 185 N...
-
TYPE SPSINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...
-
API 7K TYPE AAX MANUAL TONGS Drill String Opera...
Type Q73-340/75(2 7/8-13 3/8in)AAX Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws. Technical Parameters No.of Latch Lug Jaws Size Pange Rated Torque mm in KN·m 1# 73-95.25 2 7/8-3 3/4 55 2# 88.9-114.3 3 1/2-4 1/2 3# 107.95-133.35 4 1/4-5 1/4 75 4# 127-177.8 5-7 5# 174.6-219.1 6 7/8-8 5/8 6...
-
API 7K Type DDZ Elevator 100-750 tons
DDZ series elevator are center latch elevator with 18 degree taper shoulder, applied in handling the drilling pipe and drilling tools, etc. The load ranges from 100 tons 750 tons. The size ranges from 2 3/8” to 6 5/8”. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) Remark DDZ-100 2 3/8-5 100 MG DDZ-15...
-
API 7K Y SERIES SLIP TYPE ELEVATORS Pipe handli...
The slip type elevator is an indispensable tool in holding and hoisting drilling pipes, casing and tubing in the oil drilling and well tripping operation. It is especially suitable for the hoisting of integrated tubing sub, integral joint casing and electric submersible pump column. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Si...
-
API 7K Type CDZ Elevator Wellhead Handling Tools
CDZ drilling pipe elevator is mainly used in the holding and hoisting of drilling pipe with 18 degree taper and tools in oil and natural gas drilling, well construction. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) CDZ-150 2 3/8-5 1/2 150 CDZ-250 2 3/8-5 1/2 250 CDZ-350 2 7/8-5 1/2 350 CDZ-5...