Products
-
Mechanical Drive Drilling Rig
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth.
-
TYPE 13 3/8-36 IN CASING TONGS
Q340-915/35TYPE 13 3/8-36 IN Casing Tongs is capable of making up or breaking out the screws of casing and casing coupling in drilling operation.
-
TYPE SJ SINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
-
TYPE SPSINGLE JOINT ELEVATORS
SP series auxiliary elevator is mainly used as a tool in handling single tubing, casing and drill pipe with taper shoulder. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
-
TYPE A DRILL COLLAR SLIPS (WOOLLEY STYLE)
PS SERIES PNEUMATIC SLIPS PS Series Pneumatic Slips are pneumatic tools which are suitable for all kind of rotary table for hoisting drill pipes and handling casings. They are mechanized operating with Strong hoisting force and large working range. They are easy to operate and dependable enough. At the same time they can not only reduce the workload but also improve the work efficiency.
-
AC Variable Frequency Drive Drawworks
The main components of drawworks are AC variable frequency motor, gear reducer, hydraulic disc brake, winch frame, drum shaft assembly and automatic driller etc, with high gear transmission efficiency.
-
PDM Drill（downhole Motor）
The downhole Motor is a type of downhole power tool which takes power from the fluid and then translates fluid pressure into mechanical energy. When power fluid flows into the hydraulic motor, the pressure difference built between the inlet and outlet of the motor can rotate the rotor within the stator, providing necessary torque and speed to the drill bit for drilling. The screw drill tool is suitable for vertical, directional and horizontal wells.
-
Experiment Series Kneading Machine
Specifically for a variety of research structure, tertiary institutions and industrial and mining enterprises in lab and in test with can also be suitable for small batch precious materials experimental kneading.
-
Mightiness Type Kneading Machine
The company specifically for some ink, pigment, such as silicone rubber industry design and manufacture of high power kneading machine, the device has fast speed, good performance of discrete, no dead angle of kneading, efficiency higher merit.
-
The Vacuum Kneading Machine – Chemical engineering
Specification: CVS1000l-3000l Hot carrier: therm, water, steam. Heat the form: clip the mode,the half tube type.
-
API 7K DRILL COLLAR SLIPS for Drilling line Operation
There are three types of DCS Drill Collar Slips: S, R and L. They can accommodate drill collar from 3 inch (76.2mm) to 14 inch (355.6mm) O.D.
-
Wash Pipe Assy for Top Drive of drilling rig, OEM
Washpipe assembly connects the gooseneck pipe and the center pipe, which form a mud channel. Washpipe assembly is an important part for sealing high-pressure mud, and adopts self-sealing type.