API 7K Type DD Elevator 100-750 tons
Model DD center latch elevators with square shoulder are suitable for handling tubing casing, drill collar, drill pipe, casing and tubing. The load ranges from 150 tons 350 tons. The size ranges from 2 3/8 to 5 1/2 in. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
Technical Parameters
| Model | Size(in) | Rated Cap(Short Tons) | ||
| DP | Casing | Tubing | ||
| DD-150 | 2 3/8-5 1/2 | 4 1/2-5 1/2 | 2 3/8-4 1/2 | 150 |
| DD-250 | 2 3/8-5 1/2 | 4 1/2-5 1/2 | 2 3/8-4 1/2 | 250 |
| DD-350 | 2 7/8-5 1/2 | 4 1/2-5 1/2 | 2 3/8-4 1/2 | 350 |
Related products
-
API Type C Manual Tongs for Oil Drilling
Type Q60-273/48(2 3/8-10 3/4in)C Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and latch steps. Technical Parameters No.of Latch Lug Jaws Short Jaw Hinge Jaw Size Pange Rated Torque / KN·m mm in 1# 2 3/8-7 / 60.33-93.17 2 3/8-3.668 20 2# 73.03-108 2 7/8-4 1/4 3# 88.9-133.35 3 1/2-5 1/4 35 4# 133.35-177...
-
API 7K TYPE AAX MANUAL TONGS Drill String Opera...
Type Q73-340/75(2 7/8-13 3/8in)AAX Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws. Technical Parameters No.of Latch Lug Jaws Size Pange Rated Torque mm in KN·m 1# 73-95.25 2 7/8-3 3/4 55 2# 88.9-114.3 3 1/2-4 1/2 3# 107.95-133.35 4 1/4-5 1/4 75 4# 127-177.8 5-7 5# 174.6-219.1 6 7/8-8 5/8 6...
-
TYPE SJ SINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...
-
TYPE SPSINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...
-
API 7K Type CDZ Elevator Wellhead Handling Tools
CDZ drilling pipe elevator is mainly used in the holding and hoisting of drilling pipe with 18 degree taper and tools in oil and natural gas drilling, well construction. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) CDZ-150 2 3/8-5 1/2 150 CDZ-250 2 3/8-5 1/2 250 CDZ-350 2 7/8-5 1/2 350 CDZ-5...
-
API 7K Type DDZ Elevator 100-750 tons
DDZ series elevator are center latch elevator with 18 degree taper shoulder, applied in handling the drilling pipe and drilling tools, etc. The load ranges from 100 tons 750 tons. The size ranges from 2 3/8” to 6 5/8”. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) Remark DDZ-100 2 3/8-5 100 MG DDZ-15...