Products
-
API 7K Casing Slips for Drill Handling Tools
Casing Slips can accommodate casing from 4 1/2 inch to 30 inch (114.3-762mm) O.D.
-
Drill Collar-Slick and Spiral Downhole Pipe
The drill collar is made from AISI 4145H or finish rolling structural alloy steel, processed as per API SPEC 7 standard.
-
API 7K Type CDZ Elevator Wellhead Handling Tools
CDZ drilling pipe elevator is mainly used in the holding and hoisting of drilling pipe with 18 degree taper and tools in oil and natural gas drilling, well construction. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
-
Rotary Table for Oil Drilling Rig
The transmission of rotary table adopts spiral bevel gears which have strong bearing capacity, smooth operation and long service life.
-
AC VF Drive Drlling Rig 1500-7000m
Drawworks adopt main motor or independent motor to achieve automatic drilling and make real time monitoring for tripping operation and drilling condition.
-
API 7K Type DU Drill Pipe Slip Drill String Operation
There are three types of DU series Drill Pipe Slips: DU, DUL and SDU. They are with large handling range and light weight. Thereinto, SDU slips have larger contacting areas on the taper and higher resistance strength. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment.
-
API Tubing Pipe and Casing Pipe of Oil field
Tubing and casing are produced in accordance with API specifications. The heat-treatment lines are completed with advanced equipments and detecting instruments that can handle casing in 5 1/2″ to 13 3/8″ (φ114~φ340mm) diameters and tubing in 2 3/8″ to 4 1/2″ (φ60~φ114mm) diameters.
-
API Drill Pipe 3.1/2”-5.7/8”for Oil / Gas drilling
Tubing and casing are produced in accordance with API specifications. The heat-treatment lines are completed with advanced equipments and detecting instruments that can handle casing in 5 1/2″ to 13 3/8″ (φ114~φ340mm) diameters and tubing in 2 3/8″ to 4 1/2″ (φ60~φ114mm) diameters.
-
The Large Type CMC Kneading Machine
Specification: CVS2000l-10000l Hot carrier: transmit heat the oil, water, steam. Heat the form: clip the mode, the half tube type. Characteristics: have great capacity, the efficiency is high, consuming the ability low, capability tranquilization, the whole model installs the convenience, taking out the stalk type to maintain in brief.