Products
-
NJ Mud Agitator (Mud Mixer) for Oil field fluid
NJ mud agitator is an important part of mud purification system. In general, each mud tank equips with 2 to 3 mud agitators installed on the circulation tank, which make impeller goes into certain depth under the liquid level by revolving shaft. The circulating drilling fluid is not easy to precipitate because of its stirring and the chemicals added can be mixed evenly and quickly. The adaptive environment temperature is -30~60℃.
-
API 7K TYPE AAX MANUAL TONGS Drill String Operation
Type Q73-340/75(2 7/8-13 3/8in)AAX Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws.
-
API 7K TYPE CD ELEVATOR Drill String Operation
Model CD side door elevators with square shoulder are suitable for handling tubing casing, drill collar in oil and natural gas drilling, well construction. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
-
Elevator Link for hanging Elevator from TDS
Designing and manufacturing conform to API Spec 8C standard and SY/T5035 relevant technical standards etc.;
-
API 7K Safety Clamps for Drilling String Operation
Safety Clamps are tools for handling flush joint pipe and drill collar. There are three types of safety clamps: Type WA-T, Type WA-C and Type MP.
-
Liquid-gas Separator Vertical or Horizontal
Liquid-gas separator can separate gas phase and liquid phase from the gas contained drilling liquid. In drilling process, after going through decompression tank into separation tank, the gas contained drilling fluid impacts the baffles with high speed, which breaks and releases the bubbles in liquid to realize separation of liquid and gas and improve drilling fluid density.
-
TQ Hydraulic Power CASING TONG Wellhead tools
Technical Parameters Model TQ178-16 TQ340-20Y TQ340-35 TQ178-16Y TQ340-35Y TQ508-70Y Size range Mm 101.6-178 101.6-340 139.7-340 101.6-178 101.6-340 244.5-508 In 4-7 4-13 3/8 5 1/2-13 3/8 4-7 4-13 3/8 9 5/8-20 Hydraulic system Mpa 18 16 18 18 18 20 Psi 2610 2320 2610 2610 2610 2900 -
API 7K UC-3 CASING SLIPS Pipe handling tools
Casing Slips type UC-3 are multi-segment slips with of 3 in/ft on the diameter taper slips (except size 8 5/8”). Every segment of one slip is forced equally while working. Thus the casing could keep a better shape. They should work together with spiders and insert bowls with same taper. The slip are designed and manufactured according to API Spec 7K
-
High Temperature Kneading Machine 300-3000L
Specification: 300l-3000l Characteristics: forgive the form kettle body, the vacuum degree is high, the double spreads to move, bearing the heat high pressure, mix blend the stalk and can draw out to maintain, change frequency machine frequency modulation to adjust soon.
-
Traveling Block of oil drilling rigs high weight lifting
The Traveling Block is an important key equipment in the workover operation. Its main function is to form a pulley block by the sheaves of the Traveling Block and the mast , double the pulling force of the drilling rope, and bear all the downhole drill pipe or oil pipe and workover instruments through the hook.
-
F Series Mud Pump for oil field fluid control
F series mud pumps are firm and compact in structure and small in size, with good functional performances, which can adapt to drilling technological requirements such as oilfield high pump pressure and large displacement etc.
-
Drilling Stabilizer Downhole Equipment of BHA
A drilling stabilizer is a piece of downhole equipment used in the bottom hole assembly (BHA) of a drill string. It mechanically stabilizes the BHA in the borehole in order to avoid unintentional sidetracking, vibrations, and ensure the quality of the hole being drilled.