Heavy-Duty Drawworks for Enhanced Drilling Efficiency and Durability
|
Model of rig |
JC40 |
JC50 |
JC70 |
|
|
Nominal drilling depth, m(ft) |
withФ114mm(4-1/2 ”)DP |
2500-4000(8200-13100) |
3500-5000(11500-16400) |
4500-7000(14800-23000) |
|
with Ф127mm(5″) DP |
2000-3200(6600-10500) |
2800-4500(9200-14800) |
4000-6000(13100-19700) |
|
|
735 (1000) |
1100 (1500) |
1470 (2000) |
||
| Rated power, kW (hp) | ||||
|
275(61.79) |
340(76.40) |
485(108.98) |
||
|
Max. fast line pull, kN(kips) |
||||
|
32 (1-1/4) |
35 (1-3/8) |
38 (1-1/2) |
||
|
Dia. of drilling line, mm(in) |
||||
|
640 ×1235 |
685×1245 |
770×1436 |
||
| Drum size (D×L), mm (in) |
(251/4×481/2) |
(27 ×49 ) |
(30 ×561/2) |
|
|
1168×265 |
1270×267 |
1370×267 |
||
|
Brake hub size (D ×W), mm(in) |
(46 ×101/2 ) |
(50 ×101/2) |
(54 ×101/2) |
|
|
1500×76 |
1600×76 |
1600×76 |
||
|
Brake disc size (D×W), mm(in) |
(59 ×3) |
(63 ×3 ) |
(63 ×3 ) |
|
|
Auxiliary brake |
Electromagnetic eddy current brake/Eaton brake |
|||
|
DSF40/236WCB2 |
DS50/336WCB2 |
DS70/436WCB2 |
||
|
Dimension(L×W×H), mm(in) |
6450×2560×2482 (254×101×98) |
7000×2955×2780 (276×116×109) |
7930×3194×2930 (312×126×115) |
|
|
Weight, kg(lbs) |
28240(62259) |
45210(99670) |
43000(94800) |
|
Related products
-
AC Variable Frequency Drive Drawworks
• The main components of drawworks are AC variable frequency motor, gear reducer, hydraulic disc brake, winch frame, drum shaft assembly and automatic driller etc, with high gear transmission efficiency. • The gear is thin oil lubricated. • Drawwork is of single drum shaft structure and the drum is grooved. Compared with similar drawworks, it is of many merits, such as simple structure, small volume, and light weight. • It’s AC variable frequency motor drive and step...
-
![[Super cost-effective] Second-hand Coiled Tubing Unit](https://cdn.globalso.com/tdsparts/车4.jpg)
[Super cost-effective] Second-hand Coiled Tubin...
-
Hook Block Assembly of Drill Rig high weight li...
1. The hook block adopt the integrated design. The traveling block and the hook are connected by the intermediate bearing body, and the big hook and the cruiser can be separately repaired. 2. The inner and outer springs of the bearing body are reversed in opposite directions, which overcomes the torsion force of a single spring during compression or stretching. 3. The overall size is small, the structure is compact, and the combined length is shortened, which is suit...
-
F Series Mud Pump for oil field fluid control
F series mud pumps are firm and compact in structure and small in size, with good functional performances, which can adapt to drilling technological requirements such as oilfield high pump pressure and large displacement etc. The F series mud pumps can be maintained at lower stroke rate for their long stroke, which effectively improves the feeding water performance of mud pumps and prolongs the service life of the fluid end. The suction stabilizer, with advanced stru...
-
Crown Block of Oil/Gas Drilling Rig with Pulley...
Technical Features: • The sheave grooves are quenched to resist wear and extend its service life. • The kick-back post and rope guard board prevent the wire rope from jumping out or falling out of the sheave grooves. • Equipped with safety chain anti-collision device. • Equipped with a gin pole for repairing the sheave block. • Sand sheaves and auxiliary sheave blocks are provided in accordance with users’ requirements. •The crown sheaves are completely interchangeab...
-
30180389 10490415-315 10490416-756 122599 Eleva...
• Designing and manufacturing conform to API Spec 8C standard and SY/T5035 relevant technical standards etc.; • Select high-class alloy steel die to forge molding; • Intensity check uses finite element analysis and electrical measuring method stress test. There are one-arm elevator link and two-arm elevator link; Adopt two-stage shot blasting surface strengthening technology. One-arm Elevator Link Model Rated load (sh.tn) Standard working le...