Full Range NOV VARCO TDS Series Replacement Parts Fit HPHT Land & Medium Offshore Drilling Rigs
| Part Number | Description |
|---|---|
| 7802966 | COUPLING, QUICK MALE |
| 7802968 | COUPLING, QUICK FEMALE |
| 7801641 | BLADDER ASSEMBLY (replaces 7500487) |
| 30125053 | ASSY,JAW,NC56,PH100 |
| 116199-88 | POWER SUPPLY,24VDC,20A,WALLMOUNT |
| 87605-1 | SEAL KIT FLOOR 4″ ID ACCUMULATOR |
| 30124576 | SEALS,ACCUM,2″ |
| 56507-6-6-S | TEE, BRANCH 37/37/EXT PIPE |
| 110186 | CYLINDER,ACTUATOR,IBOP ASSY TDS9S |
| 80569+30 | NUT,HEX,JAM,2.0-12UN |
| 96290+30 | TP PCB,+5V REGULATOR BD |
| 116199-34 | INVERTER,TACH,DIGITAL,BOARD,TDS9S |
| 116199-76 | CUCV BOARD, AC INVERTER SIEMENS |
| 120488-2 | KIT,REPAIR |
| 30154683 | ASSY,TIEBACK |
| 50416-C | NUT, HEX-HEAVY 1″-8 (UNC-2B) |
| 117977 | KIT,TIEBACK,STANDARD CONFIGURATION |
| 122627-46 | REMOTE-I/O,DIGITAL,24IN/8OUT |
| 122627-47 | REMOTE-I/O,4ANALOG, 这个备件NOV以后不再进行销售了 |
| 122627-45 | REMOTE-I/O,4PT,ANALOG |
| 116867 | PLATE,DERRICK,LEG |
| 116868 | BRACKET,SERVICE LOOP,WELDMENT/MACHINING |
| 116868-500 | BRACKET,SERVICE LOOP,WELDMENT/MACHINING |
| 116869 | J-BOLT,CLAMP,.75DIA (P) |
| 51812-C | NUT,HEX-SELF LOCKING |
| 50912-C | WASHER, LOCK-REGULAR (ALT P/N: 025062) |
| 78002 | PLATE,CLAMP,SERVICE LOOP |
| 50012-24-C5D | SCREW, CAP-HEX HD DRILLED |
| 107714 | BRACKET,CONTROL LOOP |
| 56541-32 | KIT, SPLIT FLANGE 3000PSI |
| 50012-14-C5D | SCREW, CAP-HEX HD |
| 50812-W-C | WASHER, FLAT WIDE |
| 50008-8-C5D | SCREW, CAP-HEX HD DRILLED |
| 50908-C | WASHER, LOCK |
| 117976 | BEAM,LINK,TIEBACK |
| 117982 | PLATE,TIEBACK,WELDMENT |
| 50416-C | NUT, HEX-HEAVY 1″-8 (UNC-2B) |
| 50916-C | WASHER, LOCK-REGULAR |
| 112893-1 | ROD,THREADED,HIGH-TENSILE,1-8 UNC-2A |
| 119973 | STRAP,1.5X3X18.7,MS10 |
| 50016-64-C5D | SCREW,CAP,HEX-HD,DRILLED |
| 30170057 | ASSY,DERRICK TERMINATION |
| 30170057-500 | ASSY,DERRICK TERMINATION |
| 30170059 | ASSY,DERRICK SADDLE |
| 7887 | HITCH,PIN |
| 110118 | CRANK,OPERATING,INTERNAL |
| 110128 | CRANK,IBOP,INTERNAL |
| 90851 | JAW,PH |
| 16532+50 | KEY, .50 SQUARE x 2.8, 1018 STL |
| 16652 | RETAINER, DIE |
| 50006-4-C5D | SCREW, CAP-HEX HD DRILLED |
| 50008-10-C5D | SCREW, CAP-HEX HD DRILLED |
| 90858 | SPACER,.509X.750X.5LG |
| 90852-1 | SPACER,JAW,7 3/8-4 |
| 90852 | SPACER,JAW,8 5/8-5 1/4 |
| 50808-N-C | WASHER, FLAT |
| 109521 | (MT)BEARING,ROLLER,CYLINDRICAL,200X360MM |
| 108235-2 | BEARING,AC-MOTOR,NONDRIVE-END TDS9S |
| (replaces 108235-9) | |
| 94520-1AN | CARTRIDGE,VALVE,RELIEF,PHM3I |
| 93667-M11 | PLUG, CAVITY |
| 93024-6JIC | COUPLING,PRESSURE TEST |
| 56544-4-S | CAP, FEM 37DEG SEAT |
| 56544-12-S | CAP, FEM 37DEG SEAT |
| 30173386 | COUNTERBALANCE VALVE CARTRIDGE |
| M614002913-06 | GLAND,1/2″NPT,EX,ARMORED-CABLE,NON-POTD (replaces 83444-04) |
| M614002913-11 | GLAND,M32x1.5,EX,ARMORED-CABLE,NON-POTD |
| (replaces 83444-07) | |
| 129991-07 | GLAND,EExd/EExe,M50x1.5 |
| M614002989-04 | GLAND, 1/2″ NPT, ARMORED, POTD |
| M614002989-31 | GLAND, 3/4″ NPT, ARMORED, POTD |
| 30124535 | CARRIAGE,LEFT |
| 108894-Y2 | GLAND WRENCH PARKER CYLINDER |
| 108894-Y4 | WRENCH,GLAND |
| 108894-Z703 | SPANNER WRENCH PARKER CYL. |
| 108894-Z677 | WRENCH,SPANNER |
| 30172176 | COUNTER BALANCE PIN |
| 56529-6-6-C | CONN, O-RINB BOSS/37 |
| 56519-12-12S | ELBOW, O-RING BOSS/37DEG |
| 56519-10-12S | ELBOW, O-RING BOSS/37DEG |
| 56519-16-12S | ELBOW, O-RING BOSS/37DEG |
| 118463 | MANIFOLD ASSY, LT CYL. |
| M854000259 | MFLD ASY,PREFILL VLVE**(REPLACES 111712) |
| 30152190 | ASSY,MANIFOLD,ROTATING HEAD MTR,TDS-8SA |
| 30151960 | SHAFT,COMPOUND GEAR, PH-100 |
| 30156250 | GEAR,COMPOUND 40 X 25 (MACHINED) |
| 30156256 | GEAR,PINION,SHOT PIN,PH-100 |
| 110513 | BRAKE PAD (MODIFIED) (REPLACES 106167) |
| 106167 | BRAKE PAD (MODIFIED) (REPLACES 106167) |
| 110410 | BRAKE CALIPER ASSY. (REPLACES 105470) |
| 105470 | BRAKE CALIPER ASSY. (REPLACES 105470) |
| 106052 | IDS NUT,ROLLER |
| 30160382 | LOWER ST80 DIE ONLY-KIT P/N IS 30172029 |
| 30172029 | LOWER ST80 DIE ONLY-KIT P/N IS 30172029 |
| 30160380-500 | DIE,GRIP,UPPER |
| 87708-67 | SW,PB MUSHROOM HD LR/RED |
| 87708-02 | PUSHBUTTON,FLUSH LR/BLKDC |
| 87708-36 | SEL SWITCH 3 POS MT/LR |
| 87708-26 | SEL SWITCH MT 2 POS LR DC |
| 87708-33 | SEL SWITCH 3 POS SRFRLRDC |
| 87708-30 | SEL SWITCH 3 POS RET CTR |
| 87708-44 | LAMP MIN. BAYONET 24V |
| 87708-38 | INDICATING LIGHT, 24V DC RED |
| 76841 | TDS-3 SWITCH PRESSURE EEX PRESSURE RANGE |
| 118563 | SLEEVE,SHOT PIN |
| 117831 | SHOT PIN,PH-100 |
| 110161-49S | MOTOR,HYDRAULIC,LOW-SPEED/HIGH-TORQUE |
| 123114 | STAB-GUIDE,7-7.5″,ASSY,PH50 |
| 128844 | CHART,VARCO WASHPIPE ASSY GUIDE,LAMINATE |
| 30111013-1 | KIT, FILTER, GEAR-OIL (FILTER AND O-RING |
| 16781 | PYRAMID,TONG,DIE(TYPE”C”ROTARY-TONG) |
| 98898 | CRANK,ASSY,EXTERNAL |
| 96290 | TP PCB,+5V REGULATOR BD |
| 81736-2 | POTENTIOMETER,2W,10K |
| 108894-G17 | SEAL,ROD/GLAND SET |
| 122627-55 | FUSE,1.6A,250V |
| 122627-57 | BASE,ANALOG,SIEMENS S7, |
| 122627-58 | BASE,DIGITAL,SIEMENS S7 |
| 30087708-67 | SW,PB MUSHROOM HD LR/RED |
| 30087708-02 | PUSHBUTTON,FLUSH LR/BLKDC |
| 30087708-36 | SEL SWITCH 3 POS MT/LR |
| 30087708-26 | SEL SWITCH MT 2 POS LR DC |
| 30087708-33 | SEL SWITCH 3 POS SRFRLRDC |
| 30087708-30 | SEL SWITCH 3 POS RET CTR |
| 30087708-44 | LAMP MIN. BAYONET 24V |
| 30087708-38 | INDICATING LIGHT, 24V DC RED |
| 76841 | TDS-3 SWITCH PRESSURE EEX PRESSURE RANGE |
| 118563 | SLEEVE,SHOT PIN |
| 30173958 | SHOT PIN,PH-100 |
| 30156326-36S | MOTOR,HYDRAULIC,LOW-SPEED/HIGH-TORQUE |
| 30123114 | STAB-GUIDE,7-7.5″,ASSY,PH50 |
| 128844+30 | CHART,VARCO WASHPIPE ASSY GUIDE,LAMINATE |
| 30111013-KIT | KIT, FILTER, GEAR-OIL (FILTER AND O-RING |
| 16401-2 | PYRAMID,TONG,DIE(TYPE”C”ROTARY-TONG) |
| 98898+30 | CRANK,ASSY,EXTERNAL |
| 96290+30 | TP PCB,+5V REGULATOR BD |
| 81736-2 | POTENTIOMETER,2W,10K |
| 108894-G17 | SEAL,ROD/GLAND SET |
| 122627-55 | FUSE,1.6A,250V |
| 122627-57 | BASE,ANALOG,SIEMENS S7, |
| 122627-58 | BASE,DIGITAL,SIEMENS S7 |
| 91924+30 | NUT,HAMMER UNION,3.0 |
| 91923+30 | SEAL,LIP,HAMMER UNION,3.0 |
| 91921+30 | PLUG,BLIND,HAMMER,UNION |
| 91250-1 | (MT)OIL SEAL(VITON),STD.BORE,TDS |
| 51300-387-F | O-RING |
| 110562-1 | TDS9S ACCUM,HYDRO-PNEU 6″ |
| 110563-1 | TDS9S ACCUM,HYDRO-PNEU 4″ |
| 110564-1 | TDS9S ACCUM,HYDRO-PNEU 2″ |
| 122023 | ACTUATOR,ASSY,COUNTER BALANCE |
| 122024 | ACTUATOR,ASSY,COUNTER BALANCE |
| 59124P290020 | ASSY, HYD, HIGH PRESSURE HOSE |
| 121836 | ELBOW,DUCT,90,MOLDED |
| 119703 | S/C TUBE,MS30,7.0″DIA,DUCT,BLOWER |
| 56506-8-8-S | ELBOW, 90DEG EXT PIPE/37 |
| 120116 | (MT)SHAFT,ADAPTER |
| 120112 | (MT)PLATE,MOUNT,SLED,316SS |
| 120114 | (MT)PLATE,MOUNT,ADAPTER,MS17 |
| 120835 | COVER,BRAKE |
| 109555 | (MT)ROTOR,BRAKE |
| 120460-1 | PLATE,MOUNT,CALIPER |
| 51300-366-B | O-RING |
| 119978 | SCROLL,BLOWER,WELDMENT |
| 109561 | (MT)IMPELLER,BLOWER (P) |
| 109561-3 | TDS9S SPLIT TAPER BUSH |
| 30126111 | (MT)PLATE,MOUNTING,BLOWER MOTOR (REPLACES 109562) |
| 51300-320-B | O-RING |
| 30170946 | ASSY,HYDRAULIC PUMP (REPLACES 119984) |
| 120834-1 | ROD,TIE,TDS10 |
| 120170 | MOTOR,ASSY,TDS-10S,AC,DRILL |
| 53304-152 | CLAMP, HOSE 7 1/8″ (PHM-1) |
| 98290 | LINER,STEM,UPPER |
| 120797 | GOOSENECK,MACHINING |
| 118173 | PIN,ASSY,SHOT |
| 124669-5 | PAD,WEAR (REPLACES 122694) |
| 122631 | ANGLE,CARIAGE,WELDMENT |
| 30122773 | ANGLE, CARRIAGE. REMOVABLE |
| 120561-2 | RETAINER,BAIL,TDS10 |
| 120561-1 | RETAINER,BAIL ,TDS10 |
| 56006-1 | GREASE,MOLYBDENUM,DISULFIDE |
| 119359 | RETAINER,SEAL,OIL,A514 |
| 109566 | (MT)TUBE,BEARING,LUBE,A36 |
| 30176112 | RETAINER,BEARING,UPPER STEM,TDS (REPLACES 118668) |
| 119708 | BEARING,ROLLER,TAPERED,THRUST |
| 120237 | BEARING,ROLLER,7.5X3.12X2.25 |
| 120275 | RETAINER, BEARING, COMPOUND |
| 119704 | GEAR,HELICAL,COMPOUND |
| 120254 | BEARING,ROLLER,SPHERICAL,7.9X3.7X2.6 |
| 120276 | RETAINER, PINION BEARING |
| 118377 | COLLAR, LANDING (2 HALVES =QTY 1) |
| 120700 | ADAPTER,ASSY,LINK,ROTATING |
| 119707 | SHAFT,MAIN, TDS10 |
| 122231 | COVER,ASSY,TDS10 (f’bill1) |
| 78910-2 | RTV,162 WHITE 10.3 OZ, C/W MSDS |
| 50212-C | NUT, HEX-STD (UNC-2B) 3/4-10 CAD |
| 110078-L24 | (MT)CABLE, SAFETY |
| 110078-L18 | (MT)CABLE, SAFETY |
| Z6001-CAN | LOCKWIRE, .051 DIA (UK 150FT/CAN,US 143 |
| Z6000.9-CAN | WIRE,LOCK,.047DIA,MSXX (169 FT PER CAN) |
| 50903-C | WASHER, LOCK-REGULAR, # 10 |
Related products
-
VARCO SERVICE LOOP KIT, ELECTRICAL:92 feet, 101...
946963-010 CABLE-3 CONDUCTOR, 14 AWG, UNARMORED, EXANE NOV 947642-006:58P CONN-CABLE CLAMP, SHELL MS#14 NOV M614000129-200-25-3-B SERVICE LOOP NOV M614003360-1 Assembly Cable Ph100 NOV P614000139 Cable Pipe Handler Retention NOV 30183284-200-25-3-B Signal cable Varco TDS-11 NOV 30181755-100-B Signal cable TDS 11 Consol 1 NOV 30181756-100-B Siqnal kabeli TDS 11 Consol 2 NOV 30175021-86-200 SERVICE LOOP 30175021-86-200 Varco TDS-11SA NOV 30175019-86- 200 SERVICE LOO...
-
Electric Submersible Progressive Cavity Pump
The electric submersible progressive cavity pump (ESPCP) embodies a new breakthrough in oil extraction equipment developments in recent years. It combines flexibility of PCP with reliability of ESP and is applicable for broader range of mediums. Extraordinary energy saving and no rod-tubing wear make it ideal for deviated and horizontal well applications, or for use with tubing of small diameter. The ESPCP always shows reliable operation and minimized maintenance in ...
-
Nov 30170945-96-30-30/30170945-115-30-30 Top Dr...
Our company provides all kinds of top drive parts such as NOV/VARCO, CANRIG, BPM, TPEC, JH SLC Jinghong and other brands of top drive parts,imported from the United States, can provide optimization and customization and other technical advice, manufacturer customization, logistics and distribution, after-sales service integration. 30170945-96-30-30 CONTROL COMPOSITE SERVICE LOOP 30170945-115-30-30 CONTROL COMPOSITE SERVICE LOOP 30170945-114-30-30 CONTROL COMPOSITE ...
-
Hook Block Assembly of Drill Rig high weight li...
1. The hook block adopt the integrated design. The traveling block and the hook are connected by the intermediate bearing body, and the big hook and the cruiser can be separately repaired. 2. The inner and outer springs of the bearing body are reversed in opposite directions, which overcomes the torsion force of a single spring during compression or stretching. 3. The overall size is small, the structure is compact, and the combined length is shortened, which is suit...
-
Hydraulic pliers /TQ340-35/ZQ203-125/TQ178-16/Z...
Model Applicable Pipe Diameter (mm) Applicable Pipe Diameter (in) Maximum Torque (kN·m) High Gear Speed of Tong Head (rpm) Low Gear Speed of Tong Head (rpm) Rated Pressure of Hydraulic System (MPa) Rated Flow of Hydraulic System (L/min) Shifting Distance of Shifting Cylinder (mm) Rise-and-Fall Distance of Tong Head (mm) Overall Dimension (mm) Weight (kg) ZQ203-100 127-203 3½” coupling ~ 8″ body 100 40 2.7 16.6 114 1500 - 1750×1000×1360 2400 ZQ162-50 85-162 2⅜” coupl...
-
S pipe 117063-7500 Top Drive Spare Part, for TE...
1.03.10.616 Guide Small End 1.03.10.617 Guide (85-140) 1.03.10.618 Guide Large End 1.03.10.619 Guide Small End 1.03.10.620 Guide (5.5″) 1.03.10.621 Guide Large End (5.5″) 1.03.10.622 Guide Small End (5.5″) 1.03.10.623 Guide Small End 1.03.10.625 Guide (152-170) 1.03.10.626 Guide Large End 1.03.10.627 Guide Small End 1.03.10.628 Guide (85-140) 1.03.10.629 Guide Large End 1.03.10.630 Guide Small End 1.03.10.631 Guide (178-216) 1.03.10.632 G...