Drilling Stabilizer Downhole Equipment of BHA

Short Description:

A drilling stabilizer is a piece of downhole equipment used in the bottom hole assembly (BHA) of a drill string. It mechanically stabilizes the BHA in the borehole in order to avoid unintentional sidetracking, vibrations, and ensure the quality of the hole being drilled.


Product Detail

Product Tags

downhole tools  (8)

A drilling stabilizer is a piece of downhole equipment used in the bottom hole assembly (BHA) of a drill string. It mechanically stabilizes the BHA in the borehole in order to avoid unintentional sidetracking, vibrations, and ensure the quality of the hole being drilled.
It is composed of a hollow cylindrical body and stabilizing blades, both made of high-strength steel. The blades can be either straight or spiralled, and are hardfaced for wear resistance.
Several types of drilling stabilizers are used in the oilfield today. While integral stabilizers (fully machined out of a single piece of steel) tend to be the norm, other types can be used, such as :
Replaceable sleeve stabilizer, where the blades are located on a sleeve, which is then screwed on the body. This type can be economical when no repair facilities are available close to the well being drilled and air freight has to be used.
Welded blades stabilizer, where blades are welded onto the body. This type is usually not advised on oil wells due to the risks of losing blades, but is regularly used when drilling water wells or on low-cost oilfields.
Usually 2 to 3 stabilizers are fitted into the BHA, including one just above the drill bit (near-bit stabilizer) and one or two among the drill collars (string stabilizers)

Hole

Size (in)

Standard

DC Size (in)

Wall

Contact (in)

Blade

Width (in)

Fishing

Neck

Length (in)

Blade

Undergage (in)

Overall Length (in)

Approx

Weight (kgs)

String

Near-bit

6" - 6 3/4"

4 1/2" - 4 3/4"

16"

2 3/16"

28"

-1/32"

74"

70"

160

7 5/8" - 8 1/2"

6 1/2"

16"

2 3/8"

28"

-1/32"

75"

70"

340

9 5/8" - 12 1/4"

8"

18"

3 1/2"

30"

-1/32"

83"

78"

750

14 3/4" - 17 1/2"

9 1/2"

18"

4"

30"

-1/16"

92"

87"

1000

20" - 26"

9 1/2"

18"

4"

30"

-1/16"

100"

95"

1800


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Drill Bit for Oil / gas Well Drilling and Core Drilling

      Drill Bit for Oil / gas Well Drilling and Core ...

      The company has a mature series of bits, including roller bit, PDC bit and coring bit, willing to try its best to provide products with excellent performance and stable quality to customer. GHJ Series Tri-cone Rock Bit With Metal-sealing Bearing System: GY Series Tri-cone Rock Bit F/ FC Series Tri-cone Rock Bit FL Series Tri-cone Rock Bit GYD Series Single-cone Rock Bit Model Bit diameter Connecting thread (inch) Bit weight (kg) inch mm 8 1/8 M1...

    • PDM Drill(downhole Motor)

      PDM Drill(downhole Motor)

      The downhole Motor is a type of downhole power tool which takes power from the fluid and then translates fluid pressure into mechanical energy. When power fluid flows into the hydraulic motor, the pressure difference built between the inlet and outlet of the motor can rotate the rotor within the stator, providing necessary torque and speed to the drill bit for drilling. The screw drill tool is suitable for vertical, directional and horizontal wells. Parameters for th...

    • Downhole Jar / Drilling Jars (Mechanical / Hydraulic)

      Downhole Jar / Drilling Jars (Mechanical / Hydr...

      1. [Drilling] A mechanical device used downhole to deliver an impact load to another downhole component, especially when that component is stuck. There are two primary types, hydraulic and mechanical jars. While their respective designs are quite different, their operation is similar. Energy is stored in the drillstring and suddenly released by the jar when it fires. The principle is similar to that of a carpenter using a hammer. Kinetic energy is stored in the hamme...