API 7K UC-3 CASING SLIPS Pipe handling tools
Casing Slips type UC-3 are multi-segment slips with of 3 in/ft on the diameter taper slips (except size 8 5/8”). Every segment of one slip is forced equally while working. Thus the casing could keep a better shape. They should work together with spiders and insert bowls with same taper. The slip are designed and manufactured according to API Spec 7K
Technical Parameters
| Casing O.D | Specification of body | Total Number of segments | Number of Insert | Taper | Rated Cap(Short Tons) | |
| in | mm | |||||
| 7 | 177.8 | 8 5/8 | 10 | 10 | 1:3 | 250 |
| 7 5/8 | 193.7 | |||||
| 8 5/8 | 219.1 | |||||
| 9 | 228.6 | 10 3/4 | 10 | 10 | 1:4 | |
| 9 5/8 | 244.5 | |||||
| 10 3/4 | 273.1 | |||||
| 11 3/4 | 298.5 | 13 3/8 | 10 | 12 | ||
| 12 3/4 | 323.9 | |||||
| 13 3/8 | 339.7 | |||||
| 16 | 406.4 | As same as 13 3/8 | 14 | 14 | ||
| 18 5/8 | 273.1 | 17 | 17 | |||
| 20 | 508 | 17 | 17 | |||
| 22 1/2 | 571.5 | 19 | 19 | |||
| 24 | 609.6 | 19 | 19 | |||
| 26 | 660.4 | 21 | 21 | |||
| 30 | 762 | 24 | 24 | |||
| 36 | 914.4 | 28 | 28 | |||
| 42 | 1066.8 | 32 | 32 | |||
Related products
-
TYPE 13 3/8-36 IN CASING TONGS
Q340-915/35TYPE 13 3/8-36 IN Casing Tongs is capable of making up or breaking out the screws of casing and casing coupling in drilling operation. Technical Parameters Model Size Pange Rated Torque mm in KN·m Q13 3/8-36/35 340-368 13 3/8-14 1/2 13 35 368-406 14 1/2-16 406-445 16-17 1/2 445-483 17 1/-19 483-508 19-20 508-546 20-12 1/2 546-584 21 1/2-23 610-648 24-25 1/2 648-686 25 1/2-27 686-724 27-28 1/2 724-762 28 1/2-30 ...
-
API 7K TYPE B MANUAL TONGS Drill String Handling
Type Q89-324/75(3 3/8-12 3/4 in)B Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and handling shoulders. Technical Parameters No.of Latch Lug Jaws Latch Stop Size Pange Rated Torque in mm KN·m 5a 1 3 3/8-4 1/8 86-105 55 2 4 1/8-5 1/4 105-133 75 5b 1 4 1/4-5 1/4 108-133 75 2 5-5 3/4 127-146 75 3 6-6 3/4 152-171...
-
API 7K DRILL COLLAR SLIPS for Drilling line Ope...
There are three types of DCS Drill Collar Slips: S, R and L. They can accommodate drill collar from 3 inch (76.2mm) to 14 inch (355.6mm) O.D. Technical Parameters slip type drill collar OD weight insert bowl No in mm kg Ib DCS-S 3-46 3/4-8 1/4 76.2-101.6 51 112 API or No.3 4-4 7/8 101.6-123.8 47 103 DCS-R 4 1/2-6 114.3-152.4 54 120 5 1/2-7 139.7-177.8 51 112 DCS-L 6 3/4-8 1/4 171.7-209.6 70 154 8-9 1/2 203.2-241.3 78 173 8 1/2-10 215.9-254 84 185 N...
-
API 7K Casing Slips for Drill Handling Tools
Casing Slips can accommodate casing from 4 1/2 inch to 30 inch (114.3-762mm) O.D. Technical Parameters Casing O.D In 4 1/2-5 5 1/2-6 6 5/8 7 7 5/8 8 5/8 Mm 114.3-127 139.7-152.4 168.3 177.8 193.7 219.1 Weight Kg 75 71 89 83.5 75 82 Ib 168 157 196 184 166 181 insert bowl No API or No.3 Casing O.D In 9 5/8 10 3/4 11 3/4 13 3/4 16 18 5/8 20 24 26 30 Mm 244.5 273.1 298.5 339.7 406.4 473.1 508 609.6 660.4 762 Weight Kg 87 95 118 117 140 166.5 174 201 220...
-
API 7K TYPE SDD MAUNAL TONGS to Drill String
No.of Latch Lug Jaws No.of Hinge Pin Hole Size Pange Rated Torque in mm 1# 1 4-5 1/2 101.6-139.7 140KN·m 5 1/2-5 3/4 139.7-146 2 5 1/2-6 5/8 139.7 -168.3 6 1/2-7 1/4 165.1-184.2 3 6 5/8-7 5/8 168.3-193.7 73/4-81/2 196.9-215.9 2# 1 8 1/2-9 215.9-228.6 9 1/2-10 3/4 241.3-273 2 10 3/4-12 273-304.8 3# 1 12-12 3/4 304.8-323.8 100KN·m 2 13 3/8-14 339.7-355.6 15 381 4# 2 15 3/4 400 80KN·m 5# 2 16 406.4 17 431.8 ...
-
TYPE SJ SINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...