VARCO Top Drive Original Parts, Pump Shaft, Hydraulic Actuator, Pin, Gooseneck, Jaw, IBOP Cylinder, J-Box, Guide Beam Spare Parts

Short Description:

This series is special supporting parts for VARCO top drive, including pump shaft, double-rod actuator, crank pin, gooseneck, various jaw assemblies, drain/manifold tube, link-tilt actuator, duct elbow, TDS10/TDS11 shims, intermediate guide beam, scopemeter, multimeter, instrument J-box, IBOP hydraulic actuator cylinder assembly and other components.

 


Product Detail

Product Tags

Manufactured with original factory standard dimensions, it is suitable for maintenance, replacement and assembly of VARCO top drive equipment with reliable performance, and applied to oil drilling equipment maintenance.

120534 SHAFT,PUMP (MTO)
120557 ACTUATOR,DOUBLE-ROD,.25DIAX2.0
120699 PIN,CRANK,1.5DIAX21.5,MS15 (MTO)
120797 GOOSENECK,MACHINING
120851 JAW,4″-5″,ASSY,PH50
120876 PIN,CLEVIS,CRANK CYL
121726 TUBE,ASSY,DRAIN/MANIFOLD
121784 ACTUATOR,ASSY,LINK-TILT
121836 ELBOW,DUCT,90,MOLDED
122109 JAW,ASSY,6-6.6,TOOL-JOINT
122109 JAW,ASSY,6-6.6,TOOL-JOINT
122176 JAW,5-5.75″,NC38/NC40
122710 J-BOX (MTO)
123363 SHIM,CARRIAGE,TDS10 (MTO)
123364 SHIM,CARRIAGE,TDS10 (MTO)
124517 BEAM,GUIDE,INTERMED,18 FT
124629 SCOPEMETER
124630 MULTIMETER (MTO)
124994 J-BOX,INSTRUMENT,ASSY,TDS11
125594 CYLINDER,HYD,IBOP,ACTUATOR,ASSY,PH100

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Z6000.8-CAN,122443-9-H ,122718-01-20,124459-01-20,126800-01-20,

      Z6000.8-CAN,122443-9-H ,122718-01-20,124459-01-...

      122443-9-H CABLE,PIGTAIL,5TSP,TDS10 122718-01-20 PIGTAIL,ASSY,42-CONDUCTOR 124459-01-20 PIGTAIL ASSEMBLY-18 COND, 19 PIN CONN 126800-01-20 PIGTAIL,ASSY,42COND EEX 126801-01-20 ASSY,PIGTAIL,18-COND,EEX 30181884-9 PIGTAIL,7/CX1.5MM,W/7PIN-CONN,ATEX EExd 30181908-9 ASSY,PIGTAIL,PROFIBUS,7-PIN-CONN(ATEX)

    • Simple Type Kneading Machine (Reactor)

      Simple Type Kneading Machine (Reactor)

      Specification: 100l-3000l Adding feed coefficient: 0.3-0.6 Apply the scope: cellulose, food; chemical engineering, medicine etc. Characteristics: the in general use is strong, single drive. The temperature control scope: 0℃-200℃ Anticipates the way: the bottom valve anticipate The picture equipments useds for the profession of cmc in great quantities. Specification: 300l-1500l Characteristics: kettle inside can take out the vacuum, single drive. Anticipates the way: ...

    • VARCO Top Drive Spare Parts  (NOV), TDS,

      VARCO Top Drive Spare Parts (NOV), TDS,

      VARCO (NOV) Top Drive Spare Parts list: PART NUMBER DESCRIPTION 11085 RING,HEAD,CYLINDER 31263 SEAL, POLYPAK, DEEP 49963 SPRING, LOCK 50000 PKG, STICK, INJECTION, PLASTIC 53208 SPART,FTG, GREASE STR, DRIVE 53408 PLUG, PLASTIC PIPE CLOSURE 71613 BREATHER,RESERVOIR 71847 CAM FOLLOWER 72219 SEAL,PISTON 72220 SEAL ROD 72221 WIPER, ROD 76442 GUIDE, ARM 76443 COMPRESSION SPRING 1.95 76841 TDS-3 SWITCH PRESSURE EEX 77039 SEAL,LIP 8.25×9.5x.62 77039 SEAL,LIP 8.25×9.5x.62 78916 NUT,FIXING*SC...

    • Premium Shale Shaker Screen – 20 Kg for Effective Solids Control

      Premium Shale Shaker Screen – 20 Kg for E...

      Brandt VSM 300 shale shaker screen are mostly applied to the shale shakers with wedge fastening equipment. The composite frames adopt that high temperature resistance and wearproof and anti-knock polyester fiber. They are sturdy and reliable. Screens are constructed with two or three stainless steel layers bonded to the composite support frame. Accessary rubber plugs can be used to repair rips or tears. VSM 300 screens include Primary, Scalping, Secondary. Steel frame and Composite frames are...

    • BX-800S,Water well drilling rig,16TON,800M

      BX-800S,Water well drilling rig,16TON,800M

      Parameter name  Data overview Maximum drilling depth 800M Hole diameter 105-500MM Drill rod length 3-6M Recommended drill rod diameter 89-102-114-127-140MM Maximum turning torque 22000Nm Thrust 10T lifting force 40T stroke of the spindle 6.8M Hoisting lifting force Big winch 2.5 tons.small winch 1.5 tons. Maximum rpm 400r/min Climbing gradient 25° Weight of dilling rig 16.0T Walking speed 2.5Km/h Dimension5 6300-5100*2000*2800MM Adaptation conditions Loose lay...

    • API F1000 1000HP API-6# Valve Cavity Triplex Centrifugal Hydraulic Mud Pump for Oil Drilling

      API F1000 1000HP API-6# Valve Cavity Triplex Ce...

      The F mud pump, a distinguished member of the F-series triplex mud pump lineup, epitomizes engineering brilliance for the oil and gas realm. This magnificent pump is engineered to circulate drilling fluids (mud) with exceptional power and efficiency throughout the well drilling process. Celebrated for its extraordinary high-pressure and large-displacement capabilities, this pump is meticulously designed to be the cornerstone of both onshore and offshore operations, proving invaluable in chall...