English

Top Drive Service Loops (Cables)

Top Drive Service Loops (Cables) Featured Image
  • Top Drive Service Loops (Cables)
  • Top Drive Service Loops (Cables)

Short Description:

The top drive cables sold by our company are made of selected imported materials, and the materials selected for the insulation layer of the lead-aluminum protective layer are checked layer by layer, including the soft conductor and the outer sheath coated on the soft conductor, which is composed of a number of thin copper wires. Each strand of fine copper wire is composed of a number of thin copper wires, and a thin steel wire is arranged in each fine copper wire. A filling rope is arranged in the soft conductor, and an isolation layer, an insulating layer and a braided layer are arranged between the outer sheath and the soft conductor from the outside to the inside. The advantages are: corrosion resistance, high temperature resistance, low temperature resistance, freezing resistance, UV resistance, aging resistance, tensile properties and torsional properties.

The interior potting of the travelling cable to fix the cable to prevent friction when the cable comes back to bend, and the two ends are sealed with a new type of high hardness insulation material to prevent water intake. Strict drying treatment should be carried out before potting chemical materials such as epoxy resin and quartz powder, so that bubbles and moisture can not enter the cable plug, and the edge of the lead sheath should be insulated and strengthened.


Product Detail

Product Tags

Our company can provide these products:

M614002913-06-GLAND,1/2″NPT,EX,ARMORED-CABLE,NON-POTD (replaces 83444-04)

13088- KIT, SERVICE LOOP, SENSOR T 13088

87975-CABLE,2,4-COND,TW.PR,IND/SHIELD-PVC*SCD*

110076-(MT)CABLE,ARMORED,MULTI CONDUCTOR / SEE

115879-PLATE,MOUNT,CABLE (P)

118993-CABLE,INSULATED,1-CONDUCTOR

30156220-CABLE PROFIBUS + 3/C X ,075MM

30173477-646KCMIL POWER SERVICE LOOP, 4IN X 86FT HOSE, TD END -
20FT WITHOUT CONNECTORS, DERRICK END – 4FT EX PLUG &
SOCKETS, GROUND TD-3×2/0 & DERRICK- 4×2/0 WITH 4 PINS EX
PLUG(ZP-C24-26PR)

 30175883-86-4-3B-50-3700729E INNER POWER, 646MCM, 4IN X 86FT HOSE, 3FT
TOP DRIVE RIG PLUG/PIN, 4FT DERRICK RIG PANEL MOUNT
RECPT/SOCKET, 4X2/0 GROUND/LUGS 30175883-86-4-3B

10657456-002-

110022 (but 25ft, BLACK)-TOP DRIVE POWER CABLE PIGTAIL – TDS11, 25FT (BLACK)

110022 (but 25ft, RED)-TOP DRIVE POWER CABLE PIGTAIL – TDS11, 25FT (RED)

110022 (but 25ft, WHITE)-TOP DRIVE POWER CABLE PIGTAIL – TDS11, 25FT (WH)

110078-FL2-(MT)FERRULE, SAFETY CABLE

110078-L12-CABLE, SAFETY

110078-L18-(MT)CABLE, SAFETY

110078-L24-(MT)CABLE, SAFETY

110078-L36-(MT)CABLE, SAFETY .032

114724-BLK-100-CABLE,POWER,W/QD,100′,ASSY,BLACK SCD

114724-BLK-50-P-CABLE ASSY, POWER W/CONNECTOR BLK (646MC

114724-RED-100-CABLE,POWER,W/QD,100′,ASSY,RED

114724-RED-50-P-CABLE ASSY, POWER W/CONNECTOR, RED (646M

114724-WHT-100-CABLE,POWER,W/QD,100′,ASSY,WHITE

117121-500-TIE,CABLE,NYLON,HD

117339-200-CABLE,EARTHING,20′,ASSY,TDS9S

122443-200-ASSY,CABLE

122443-200-B-Cable Assy. Composite (18Cond.), 50 FT long, Connectorized 124458-50-B

123551-100-KIT,CABLE,INCOMING,POWER 100′,TDS10

123985-100B-CABLE ASSY,COMPOSITE(42 COND.) NOV PN 123985-100B

123985-200-B-60-37000272E 42C COMP CABLE ASSY 200FT LONG CONN ON
BOTH ENDS (123985-200-B)

123985-50-B- Aux Power (18 Cond.), 50 FT long, Connectorized 123985-50-B

124404-100-JUMPER CABLE KIT 100′ TDS10

124457-200-25-4-B-Cable AUX power assy

124457-86-4-4-B-CSW50-3700045 – INNER AUX, 19 PIN, 2IN X 86FT HOSE, 4FT TOP DRIVE PLUG/SOCKET, 4FT DERRICK PLUG/PIN

124458-100-B-ASSEMBLY,JUMPER CABLE-18 COND 18 pin  compound cable   

124458-200-B-60-37000273E CONTROL JUMPER – TDS11, 900TS, 200,
CONNECTORIZED, NONHAZARDOUS 124458-200-B

124458-50-B-Cable Assy. Composite (18Cond.), 50 FT long, Connectorized 124458-50-B

124975-135-25-4B-50-3700254E POWER, 646MCM, 4INX135FT HOSE ONE
FLANGE ON DERRICK END, 4FT DERRICK RIG PLUG/PIN, 25FT
VFD RIG RECEPT./SOCKET, 1X444 GROUND/LUGS 124975-135
-25-4B

124975-150-25-4-B-DERRICK,POWER,TDS9,646MCM,150-25-
4FT,4FT 124975-150-25-4-B

124977-100-CABLE KIT, JUMPER

125093-100-CABLE, EARTHING, 444MCM, ASSY

125093-50-CABLE ASSY, EARTHING (444MCM), ASSY

125274-100-INCOMING POWER CABLE KIT

126498-200-25-3-B-CONTROL, 42PIN, 2IN X 200FT HOSE, 38IN TD EX
RECEPT./SOCKET, 25FT CONTROL HOUSE EX PLUG/PIN

30155550-100-B-

30155551-100-B-

30156341-16-CABLE,EARTHING(YEL-GRN)LOW HAL,MUD RES

30156378-86-20-20-CSW50-3700158 INSTRUMENT, 30156378-86-20-20, (1.5 SQMM
8/C + 16 SQMM 7/C), 2IN X 86FT HOSE, 20FT TD, 20FT
DERRICK, NON-CONNECTORIZED

30156378-92-20-20-AUX, 1.5 SQMM 8/C + 16 SQMM 7/C, 2INX92FT
HOSE, 20FT ON TD, 20FT ON DERRICK, NON-
CONNECTORIZED 30156378-92-20-20

30170945-86-30-30-CONTROL, 6X1.0 PRS+44X2.5, 2IN X 86FT
HOSE, 30FT TD, 30FT DERRICK, NON-CONNECTORIZED

30170945-92-30-30-CONTROL, 6X1.0 PRS+44X2.5, 2INX92FT
HOSE, 30FT ON TD, 30FT ON DERRICK, NON_x005f CONNECTORIZED 30170945-92-30-30

30173674-200-25-8.5-B -AUX. POWER SERVICE LOOP, 12AWG/12C + 4AWG/4C, 3IN X
200FT HOSE, TD END – 8.5FT WITH EX/PLUG & SOCKETS, CTRL
HOUSE – 25FT WITH NON-EX INLINE RECEPT. & PINS

30173675-200-25-8.5-B-CONTROL SERVICE LOOP, 16AWG/7TSP + 16AWG/37C, 3IN X
200FT HOSE, TD END – 8.5FT WITH EX/PLUG & SOCKETS, CTRL
HOUSE – 25FT WITH NON-EX INLINE RECEPT. & PINS

30175017-65-4-3-B-777MCM INNER POWER LOOP 65FT

30175017-75-4-3-B-POWER, 777 VFD, 4IN X 75FT HOSE, END
CAP, 4FT TOP DRIVE RIG PLUG/PIN, 4FT DERRICK RIG
RECPT/SOCKET, 4X2/0 GROUND/LUGS

30175017-86-4-3-B-POWER, 777 VFD, 4IN X 86FT HOSE, END CAP, 50 INCH TOP
DRIVE RIG PLUG/PIN 4FT DERRICK RIG RECP/SOCKET 4 X 2/0
GROUND/LUGS

30175018-86-4-3-B-50-3701091E POWER, 777VFD, 4IN X 86FT HOSE, 3FT TD EX
RECEPT./PIN, 4FT DERRICK EX PLUG/SOCKET, 4 GROUNDS LOGS

 

 



  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • Heavy Weight Drill Pipe （HWDP）

      Heavy Weight Drill Pipe （HWDP）

      Product Introduction： Integral heavy weight drill pipe is made from AISI 4142H-4145H alloy structural steel. The manufacturing technique strictly performs SY/T5146-2006 and API SPEC 7-1 standards. Technical Parameters for Heavy Weight Drill Pipe： Size Pipe body Tool joint Single quality Kg/Piece O.D. (mm) I.D. (mm) Upset size Thread type O.D. (mm) I.D. (mm) Central (mm) End (mm) 3 1/2 88.9 57.15 101.6 98.4 NC38 120...

      See more products >
    • Simple Type Kneading Machine (Reactor)

      Simple Type Kneading Machine (Reactor)

      Specification: 100l-3000l Adding feed coefficient: 0.3-0.6 Apply the scope: cellulose, food; chemical engineering, medicine etc. Characteristics: the in general use is strong, single drive. The temperature control scope: 0℃-200℃ Anticipates the way: the bottom valve anticipate The picture equipments useds for the profession of cmc in great quantities. Specification: 300l-1500l Characteristics: kettle inside can take out the vacuum, single drive. Anticipates the way: ...

      See more products >
    • SWITCH PRESSURE,76841,79388,83095,30156468-G8D,30156468-P1D,87541-1,

      SWITCH PRESSURE,76841,79388,83095,30156468-G8D,...

      VARCO OEM Part number: 76841 TDS-3 SWITCH PRESSURE EEX 79388 SWITCH,PRESSURE,IBOP 15015+30 CLAMP, HOSE (REPLACES 15015) 30156468-G8D SWITCH, DIFFERENTIAL PRESSURE 30156468-P1D SWITCH, DIFFERENTIAL PRESSURE EEX (d) 87541-1 SWITCH, 30″ Hg-20 PSI (EExd) 1310199 Switch,Pressure,XP,Adjustable Range 2-15psi 11379154-003 PRESSURE SWITCH,18 PSI(DECREASING) 11379154-002 PRESSURE SWITCH,800 PSI(RISING) 30182469 PRESSURE SWITCH，J-BOX，NEMA 4 83095-2 PRESSURE SWITCH (UL) 30156468-PID S...

      See more products >
    • TYPE SPSINGLE JOINT ELEVATORS

      TYPE SPSINGLE JOINT ELEVATORS

      SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...

      See more products >
    • Drill Collar-Slick and Spiral Downhole Pipe

      Drill Collar-Slick and Spiral Downhole Pipe

      The drill collar is made from AISI 4145H or finish rolling structural alloy steel, processed as per API SPEC 7 standard. In the entire producing process of drill collar, the test data of each item’s performance test, from workblank, heat treatment to connecting thread and other manufacturing process, are traceable. Drill collars’ detection is completely as per API standard. All the threads undergo phosphatization or copper plating treatment so as to increase their co...

      See more products >
    • CYLINDER,Hydraulic cylinder,NOV CYLINDER,110687,110687,6027,10656103-001,10654571-001

      CYLINDER,Hydraulic cylinder,NOV CYLINDER,110687...

      Product Name: CYLINDER,Hydraulic cylinder Brand: NOV, VARCO Country of origin: USA Applicable models: TDS4SA, TDS8SA, TDS9SA, TDS11SA Part number: 110687,110687,6027,10656103-001,10654571-001 Price and delivery: Contact us for a quotation

      See more products >
    Hit enter to search or ESC to close