Solid control system/horizontal mud mixer used in oil fields
| Slurry Mixer Parameters | 40 | 55 | 75 | 110 | 150 | 220 |
|---|---|---|---|---|---|---|
| Model | 40 | 55 | 75 | 110 | 150 | 220 |
| Motor Power (KW) – 4-pole | 4 | 5.5 | 7.5 | 11 | 15 | 22 |
| Rated Motor Speed | 50Hz: 1430 60Hz: 1716 |
50Hz: 1450 60Hz: 1740 |
50Hz: 1450 60Hz: 1740 |
50Hz: 1460 60Hz: 1752 |
50Hz: 1460 60Hz: 1752 |
50Hz: 1470 60Hz: 1764 |
| Impeller Speed (rpm) | 50Hz: 72 60Hz: 69 |
50Hz: 72 60Hz: 69 |
50Hz: 72 60Hz: 69 |
50Hz: 73 60Hz: 70 |
50Hz: 73 60Hz: 70 |
50Hz: 73 60Hz: 70 |
| Impeller Diameter (mm) | 500 | 650/600(double layer) | 650 (700 detachable) (single layer) | 700/650(double layer) | 800 (single layer) | 800/700(double layer) |
| Reduction ratio | 50Hz: 1:20 60Hz: 1:25 |
—– | —– | —– | —– | —– |
| Shaft Length (mm) (per customer’s actual requirement) | 1100 | 1100 | 1800/2100(double layer) 1500 (single layer) |
1800/2100(double layer) 1500 (single layer) |
1800/2100(double layer) 1500 (single layer) |
1800/2100(double layer) 1500 (single layer) |
| Weight (kg) (excluding shaft) | 191 | 275 | 287 | 366 | 459 | 738 |
| External dimension (mm)/(in) (excluding shaft) | 890×500×518 / 35×20×20 |
1020×600×576 / 40×24×23 |
1040×600×576 / 41×24×23 |
1180×660×663 / 46×26×26 |
1280×710×673 / 50×28×26 |
1428×860×730 / 56×34×29 |
Note: Shaft length can also be determined according to tank depth
Related products
-
TDS Top Drive Spare Parts: Cam Follower, NOV Va...
NOV VARCO TOP DRIVE SYSTEM TDS-11SA.TDS-11SH,TDS-11SD CAM FOLLOWER, 71613 10077098-001 BREATHER,RESERVOIR 呼吸器 71847 10088343-001 CAM FOLLOWER IBOP滚轮 72219 10385199-001 SEAL,PISTON 背钳活塞密封 72220 10385200-001 SEAL ROD 活塞杆密封 72221 10385201-001 WIPER, ROD 除泥器 72946 VALVE,CARTRIDGE,CHECK 止回阀芯阀 73302 BRAKE,AIR (P) 空气制动器（P） 74004 GAUGE, SIGHT, OIL 6600/6800 KELLY 6600/6800方钻杆油目测表 75981 GASKET,RETAINER,SEAL 密封 76417 VALVE,CONTROL,HYD 控制阀 76442 GUIDE, ARM 扶...
-
Mud Gas Separator: Critical Equipment for Drill...
Gas-cut drilling fluid enters the separator through the inlet pipeline and impacts baffles at high velocity, breaking down and releasing entrained gas bubbles. As the fluid flows over metal surfaces, turbulence further separates bubbles, which are then discharged through the vent line for recovery or flaring. The degassed drilling fluid settles at the bottom of the tank and exits through the liquid outlet to the drilling fluid purification system for further treatment. Available in sizes from...
-
S pipe 117063-7500 Top Drive Spare Part, for TE...
1.03.10.616 Guide Small End 1.03.10.617 Guide (85-140) 1.03.10.618 Guide Large End 1.03.10.619 Guide Small End 1.03.10.620 Guide (5.5″) 1.03.10.621 Guide Large End (5.5″) 1.03.10.622 Guide Small End (5.5″) 1.03.10.623 Guide Small End 1.03.10.625 Guide (152-170) 1.03.10.626 Guide Large End 1.03.10.627 Guide Small End 1.03.10.628 Guide (85-140) 1.03.10.629 Guide Large End 1.03.10.630 Guide Small End 1.03.10.631 Guide (178-216) 1.03.10.632 G...
-
API Drill Pipe 3.1/2”-5.7/8”for Oil / Gas drilling
Product Introduction: Our company specializes in the production and sale of API standard oil drill pipes with the OD from 2 3/8 to 5 1/2 and the grade from E75 to S135. And the drill pipes are mainly used in the construction of middle-deep well, horizontal well, and extended reach well in the process of oil and gas exploration and development. With the overall characteristics of good surface finish, nice flexibility, superior impact tolerance, excellent adhesion and ...
-
ZCQ Series Vacuum Degasser of Oil field
ZCQ series vacuum degasser, also known as negative pressure degasser, is a special equipment for treatment of gas cut drilling fluids, able to quickly get rid of various gas intruding into the drilling fluid. Vacuum degasser plays an important role in recovering mud weight and stabilizing mud performance. It can also be used as a high-power agitator and applicable to all types of mud circulating and purification system. Technical Features: • Compact structure and deg...
-
Original VARCO Top Drive Spare Parts for Offsho...
This series consists of original standard parts specially for VARCO top drive, including thrust ring, actuator assembly, thrust bearing, heat exchanger, terminal assembly, washpipe holding ring, 3″ bore high-pressure washpipe and assembly, snap ring, packing box assembly, pressure manifold hose assembly, bottom guide beam, wire twister plier set, PH100 NC50 jaw assembly, rotating head motor / link adapter tube assembly, shot pin tube assembly, line adapter tube assembly and 3″ bor...