P614000093/30156326-36s Nov Top Drive Hydraulic Motor
| 30156326-36S | MOTOR,HYDRAULIC,LOW-SPEED/HIGH-TORQUE |
| 110161-49S | MOTOR,HYDRAULIC,LOW-SPEED/HIGH-TORQUE |
| 10377630-003 | MOTOR,HYDRAULIC,LOW-SPEED/HIGH-TORQUE |
| P614000093 | HYDRAULIC MOTOR |
| 30172180 | MOTOR,HYDRAULIC,MODIFIED |
| 30160625 | SEAL,HYD MOTOR |
| M364001027 | MOTOR,HYDRAULIC,MODIFIED |
Related products
-
CYLINDER,ACTUATOR,IBOP ASSY TDS9S,120557-501,11...
Here attached OEM part number for you reference: 110042 SHELL,ACTUATOR (PH50) 110186 CYLINDER,ACTUATOR,IBOP ASSY TDS9S 110703 ACTUATOR ASSY, COUNTER BALANCE 110704 ACTUATOR,ASSY,COUNTER BALANCE 117853 YOKE,IBOP,ACTUATOR 117941 ACTUATOR,ASSY,CLAMP,PH 118336 PIN,ACTUATOR,LINK 118510 ACTUATOR,ASSY,IBOP 119416 ACTUATOR,HYD,3.25DIAX10.3ST 120557 ACTUATOR,DOUBLE-ROD,.25DIAX2.0 121784 ACTUATOR,ASSY,LINK-TILT 122023 ACTUATOR,ASSY,COUNTER BALANCE 122024 ACTUATOR,ASSY,COUNTER BALANCE 125594 CYLINDER,HY...
-
SCREW, CAP-HEX HD，50012-26-C5,50014-22-C5D,500...
OEM part number: 50005-4-C5D SCREW, CAP-HEX HD 50005-5-C5D Болт 50005-6-C5D SCREW, CAP-HEX HD DRILLED 50005-8-C5D SCREW, CAP-HEX HD DRILLED 50006-05-C5D Screw Cap-Hex-Head(UNC-24) 50006-06-C5D Болт 50006-08-C5D Болт 50006-10 Болт с отверстием под контровку 50006-10-C5D SCREW, CAP-HEX HD DRILLED 50006-11-C5D SCREW, CAP-HEX HD (UNC) 50006-12-C5D SCREW, CAP-HEX HD DRILLED 50006-14-C5D SCREW, CAP-HEX HD (UNC) 50006-18-C5D SCREW, CAP-HEX HD DRILLED 50006-20-C5D CAPSCREW: HEX HEAD DRILLED 50006-22-...
-
GAUGE,ANALOG,PR21VP-307,96219-11,30155573-21,TD...
74004 GAUGE, SIGHT, OIL 6600/6800 KELLY 80630 GAUGE PRESSURE, 0-3000 PSI/0-200 BAR 124630 MULTIMETER (MTO) 128844 CHART,VARCO WASHPIPE ASSY GUIDE,LAMINATE 30176029 FLOWMETER, VISCOSITY-COMPENSATED(KOBOLD) 108119-12B SIGHT GAUGE ,TDS10 115217-1D0 GAUGE,PRESSURE 115217-1F2 GAUGE,PRESSURE 128844+30 CHART,VARCO WASHPIPE ASSY GUIDE,LAMINATE 30155573-11 GAUGE,ANALOG ELECTRO-FLOW 0-300 RPM 30155573-12 GAUGE,ANALOG ELECTRO-FLOW 0-250 RPM 30155573-13 METER, ANALOG, 0-400 RPM 30155573-21 GA...
-
Liquid-gas Separator Vertical or Horizontal
Liquid-gas separator can separate gas phase and liquid phase from the gas contained drilling liquid. In drilling process, after going through decompression tank into separation tank, the gas contained drilling fluid impacts the baffles with high speed, which breaks and releases the bubbles in liquid to realize separation of liquid and gas and improve drilling fluid density. Technical Features: • Outrigger height is adjustable and easily installed. • Compact structur...
-
BX-400S,Water well drilling rig，8.5TON,400M
Parameter name Data overview Maximum drilling depth 400M Hole diameter 105-325MM Drill rod length 3-6M Recommended drill rod diameter 89-102-114MM Maximum turning torque 8000Nm Thrust 8T lifting force 20T stroke of the spindle 6.6M Hoisting lifting force 1.5T Maximum rpm 200r/min Climbing gradient 25″ Weight of dilling rig 8.5T Walking speed 2.5Km/h Dimensions 5200-3800*1800*2350MM Adaptation conditions Loose layer and bedrock Drilling method ...
-
DC Drive Drilling Rig/ Jackup Rig 1500-7000m
The drawworks, rotary table and mud pump are driven by DC motors, and the rig can be used in deep well and ultra deep well operation onshore or offshore. • It can be equipped with top drive device. • It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted. Type and Main Parameters of DC Drive Drilling Rig: Type ZJ40/2250DZ ZJ50/3150DZ ZJ70/4500DZ ZJ90/...