Oilfield Drilling Taper Thrust Bearing for Varco Top Drive System TDS11SA
Maintenance points:
Regular cleaning: Use diesel or kerosene to soak and clean, remove the sealing cover to thoroughly remove impurities, and check the wear after air drying;
Lubrication management: Use high-temperature grease (such as high-quality yellow dry oil) to melt over a slow fire and then immerse the bearing to ensure full penetration;
Condition monitoring: Use a wooden stick to conduct the rotation noise to judge abnormalities. Loose or serious defects need to be replaced in time with the same model OEM parts;
Rust prevention: Apply anti-rust oil immediately after cleaning to avoid corrosion during storage.
It is recommended to carry out comprehensive maintenance every 2000 hours of operation or after completing deep well operation to extend the service life.
| 79854 | BALL-BEARING,11″IDX13″OD,ROT.PH.TDS | NOV |
| 88099 | BEARING,BALL,12.0X14.0X1.0 | NOV |
| 88600 | BEARING,ROLLER,CYLINDRICAL,5.12X7.87 | NOV |
| 89195 | BEARING,THRUST,1.0ID | NOV |
| 91252 | BEARING,ROLLER,CYLINDRICAL,10.23X18.9X3. | NOV |
| 108319 | BEARING,ROLLER,TAPER,THRUST | NOV |
| 109519 | (MT)BEARING,ROLLER,TAPER,200X310MM | NOV |
| 109521 | (MT)BEARING,ROLLER,CYLINDRICAL,200X360MM | NOV |
| 109522 | (MT)BEARING,ROLLER,CYLINDRICAL,75X160MM | NOV |
| 109538 | (MT)RING,RETAINING | NOV |
| 109593 | (MT)RETAINER,BEARING,.34X17.0DIA | NOV |
| 109594 | (MT)COVER,BEARING,8.25DIA,A36-STL | NOV |
| 110189 | RETAIN-RING, TDS9S | NOV |
| 110190 | SPACER,BEARING,MOTOR TDS9S | NOV |
| 117987 | (MT)BEARING,ROLLER,SPHERICAL,80X170 | NOV |
| 118456 | BEARING | NOV |
| 119708 | BEARING,ROLLER,TAPERED,THRUST | NOV |
| 120237 | BEARING,ROLLER,7.5X3.12X2.25 | NOV |
| 120254 | BEARING,ROLLER,SPHERICAL,7.9X3.7X2.6 | NOV |
| 120275 | RETAINER, BEARING, COMPOUND | NOV |
| 120276 | RETAINER, PINION BEARING | NOV |
| 120455 | BEARING,ROLLER,340X190MM,55 | NOV |
| 120457 | SLEEVE,WEAR | NOV |
| 122948 | BEARING,BALL,DEEP-GROOVE,ENCODER,TDS9 | NOV |
| 1100229 | WRENCH WHEEL BEARING | NOV |
| 4600106 | BEARING,FAFNIR W201PP,BALL | NOV |
| 30116803 | BEARING,ROLLER,TAPERED | NOV |
| 30117771 | BEARING,ROLLER,TAPER,THRUST,11.12X23.75 | NOV |
| 30120556 | (MT)BEARING,THRUST,21.5OD | NOV |
| 30151954 | BEARING,RADIAL,LIGHT | NOV |
| 30151955 | Retainer Bearing PH-100 | NOV |
| 30154362 | SHIELD, BEARING,SMALL BORE, TDS 4S | NOV |
| 30154363 | SHIELD,BEARING,LARGE BORE, TDS-4S & 8S (replaces 122748) | NOV |
| 30173521 | ISOLATOR,UPPER BEARING | NOV |
| 30176112 | RETAINER,BEARING,UPPER STEM,TDS | NOV |
| 4301000460 | BEARING | NOV |
| 4301000470 | BEARING | NOV |
| 0-7602-0200-41 | BEARING, ROLLER | NOV |
| 0-7602-0210-90 | ROLLER BEARING | NOV |
| 0-7602-0210-91 | ROLLER BEARING | NOV |
| 0-7602-0212-65 | BEARING, ROLLER, | NOV |
| 1030-10-0090 | BEARING, BALL 6320 | NOV |
| 1030-14-0004 | BEARING,ROLLER CYLINDERICAL | NOV |
| 1030-20-0076 | BEARING BALL 6330M | NOV |
| 10511454-001 | SEAL,SHAFT,BEARING 5.906, 7.75, 0.5 | NOV |
| 108235-2 | BEARING,AC-MOTOR,NONDRIVE-END TDS9S-QJ316replaces 108235-9 | NOV |
| 108235-3 | SEAL,AC-MOTOR,DRIVE-END TDS9S | NOV |
| 108235-4 | SEAL,AC-MOTOR,NONDRIVE-END TDS9S | NOV |
| 109567-B | TDS9S BEARING,ROLLER | NOV |
| 109567-T | TDS9S PLATE,THRUST | NOV |
| 119706+30 | RETAINER,BEARING,MS21 (MTO) | NOV |
| 125727-1 | CHOCK,CARRIAGE,TDS9 | NOV |
| 125727-2 | PLATE,CHOCK,LINK,TDS11 | NOV |
| 30174875-1 | BEARING, DRIVE END | NOV |
| 51217-20 | LOCKWASHER,BEARING | NOV |
| 56006-1 | GREASE,MOLYBDENUM,DISULFIDE | NOV |
| 6550-25-0029 | RTD, BEARING 3AWG | NOV |
| 682-28-0 | BEARING RING, OUTSIDE | NOV |
| 742-14-0 | BRG. RING, OUTSIDE, 360 X 354 X 35 | NOV |
| 80784+30 | BEARING,ROLLER,CAM,2.0-12UN-ROD | NOV |
| 81692+30 | WASHER,LOCK,BEARING | NOV |
| 91242+30 | BEARING,ROLLER,TAPER,7.87X11.81X2.0 | NOV |
| 91829-1 | (MT)SLEEVE,STEM,STD.BORE,TDS | NOV |
| 99423-16 | BEARING,SPHERICAL,LINK-TILT | NOV |
| P611002413 | Bearing Thrust 500 Ton Tds11 | NOV |
| ZS4720 | BEARING, (ZB4721 &65670576) S | NOV |
| ZS5110 | BEARING, SPHERICAL ROLLER | NOV |
| ZT16125 | BEARING MAIN 14P | NOV |
| 720891 | Подшипник поворота манипулятора №720891 Teско | TESCO |
| 720893 | Cone Bearing Radial Rlr Tpr | TESCO |
| 720894 | Cup Bearing Radial Rlr Tpr | TESCO |
| 6208 ZZ C4 | Bearing | NOV |
| 686 | Bearing | TESCO |
| 2108 | Bearing,Radial,Rlr,Sph,CB,125mm-ODx70mm-IDx31mm-W | TESCO |
| 3227 | Bearing, deep groove, roller, tapered, 320mm Ø outer x 240mm Ø inner x 51mm width | TESCO |
| 7452 | Bearing, Support, Roller, Tapered, 14.5″ Ø Outer x 7.0″ Ø Inner x 3.25″ Thick Bearing,Thrust,Rlr,Tpr,14.5″ODx7.0″IDx3.25″Thk | TESCO |
| 8830 | Cone,Bearing,Radial,Rlr,Tpr,6.5000 “IDx1.8750 “W | TESCO |
| 8831 | Bearing outer ring, radial, roller, tapered, 9.7500″ Ø outer x 1.5000″ width | TESCO |
| 10333 | Bearing cap lower | TESCO |
| 12958 | Radial bearing, Roller, spherical, CB, 260mm- Out. diameter x 170mm-Ø inside x 67mm-Width Bearing,Radial,Rlr,Sph,CB,260mm-ODx170mm-IDx67mm-W | TESCO |
| 12959 | Bearing, Radial, Roller, Spherical, CB, 160mm Ø outer x 75mm Ø inner x 55mm wide Bearing,Radial,Rlr,Sph,CB,160mm-ODx75mm-IDx55mm-W | TESCO |
| 12960 | Bearing, Radial, Roller, Spherical, CB, 140mm Ø outer x 65mm Ø inner x 48mm wide Bearing,Radial,Rlr,Sph,CB,140mm-ODx65mm-IDx48mm-W | TESCO |
| 12961 | Radial bearing, Roller, spherical, CB, 110mm- Out. diameter x 50mm-Ø inside x 40mm-Width Bearing,Radial,Rlr,Sph,CB,110mm-ODx50mm-IDx40mm-W | TESCO |
| 13544 | TESCO | |
| 16186 | Bearing, Radial, Roller, Tapered, 240mm Ø Outer x 160mm Ø Inner x 51mm Width Bearing,Radial,Rlr,Tpr,240mm-ODx160mm-IDx51mm-W | TESCO |
| 820136 | Bearing | TESCO |
| 820137 | Bearing | TESCO |
| 820138 | Bearing,Radial,Dbl-Rlr,Cyl,280mm-ODx200mm-IDx80mm-W | TESCO |
| 820192 | Bearing,Rlr,Sph,190mm-ODx90mm-IDx64mm-W | TESCO |
| 840040 | Bearing,Thrust,Rlr,Tpr,19.0″ODx9.0″IDx4.125″Thk | TESCO |
| 840041 | Bearing,Slewing,23.8″ODx15.1″IDx2.5″Thk | TESCO |
| 970274 | Bearing | TESCO |
| 970280 | Bearing | TESCO |
| 1100028 | Bearing | TESCO |
| 5005608 | Bearing | TESCO |
| 5005609 | Bearing | TESCO |
| 5005611 | Bearing | TESCO |
| 5005612 | Bearing | TESCO |
| 5005613 | Bearing | TESCO |
| 5005614 | Bearing | TESCO |
| 5007653 | Bearing | TESCO |
| 5024394 | Bearing,Lube,wUnirexEP2,ForPart#820141 | TESCO |
| 5029549 | Bearing,Ball,30mmIDx62mmODx16mm | TESCO |
| 5029553 | Bearing,Ball,25mmIDx52mmODx15mm | TESCO |
| 5039996 | Bearing | TESCO |
| 6209-2ZC3 | Bearing | TESCO |
| 6309-2ZC3 | Bearing | TESCO |
| 6539 | Bearing | TESCO |
| 6222 | Washer,Cap Spring,Link Carrier,HMI | TESCO |
| 682 | Bearing,Radial,Rlr,Cyl,110mm-ODx50mm-IDx27mm-W | TESCO |
| 11863 | Bearing,Radial,Ball,AC,125mmx70mmx39.7mm W | TESCO |
| 5002005 | Bearing,Roller,Actuator,Mudsaver Valve | TESCO |
| 7144 | Bearing Quill Hub | TESCO |
| 30172475-28-16 | BEARING,GARLOCK TYPE DP4 | NOV |
| 30160734 | BEARING,BALL | NOV |
| 30160733 | BEARING,BALL | NOV |
| 30160732-l | BEARING,ROLLER | NOV |
| 30160731 | BEARING,ROLLER | NOV |
| 30160626 | SEAL,BEARING COVER | NOV |
| 30160605 | BEARING,GEAR SLIDE | NOV |
| 10658 | BEARING,ROLLER | NOV |
| 30160732-1 | BEARING,ROLLER | NOV |
| P361000027 | SPHERICAL BEARING,ROD END | NOV |
| AR03-10 | BEARING,SLEW | NOV |
| 30170581-1 | BEARING,TURNTABLE | NOV |
| 30180914 | RETAINER,BEARING,MACH | NOV |
| 91242 | BEARING,TAPERED,ROLLER | NOV |
| 30174374 | BEARING,MAIN THRUST | NOV |
| 97996 | SPACER,RADIAL BEARING | NOV |
| 116803 | BEARING,TAPER ROLLER | NOV |
| 10377495-004 | MAIN THRUST BEARING FLOW SWITCH | NOV |
| 30158767-O4 | BEARING, CAM FOLLOWER | NOV |
| 3O158767-O4 | BEARING, CAM FOLLOWER | NOV |
| 30155884-813 | PUNCH,KNOCK-OUT, ROUND, BALL BEARING DR IVE | NOV |
| 30172047-500 | BEARING,WINTERBRONZE,FLANGED | NOV |
| 30180916 | Bearing isolator | NOV |
| 16629 | 039 - Bearing,Radial,Rlr,Sph,Dbl,130mmODx60mmIDx46mm W **1 Week Delivery** |
TESCO |
| 7206 | 071 – Bearing,Pinion,MudsaverValve **1 Week Delivery** |
TESCO |
| 1.01.24.001 | Bearing DQ-40LHTY-JQ(250T) | TPEC |
| 1.10.01.009 | Bearing 1.10.01.009 DQ-40LHTY-JQ(250T) | TPEC |
| 1.10.01.011 | Bearing 228,6×482,6×104.775 1.10.01.011 DQ-40LHTY-JQ(250T) | TPEC |
| 1.10.01.012 | Bearing 1.10.01.012 DQ-40LHTY-JQ(250T) | TPEC |
| 1.10.01.033 | Bearing 1.10.01.033 DQ-40LHTY-JQ(250T) | TPEC |
| 1.10.01.034 | Bearing 1.10.01.034 DQ-40LHTY-JQ(250T) | TPEC |
| 1.10.03.031 | Bearing 1.10.03.031 DQ-40LHTY-JQ(250T) | TPEC |
| 1.10.05.010 | Bearing 1.10.05.010 DQ-40LHTY-JQ(250T) | TPEC |
| 94042-15 | ORIFICE FOR UPPER BEARING (∅.059) | NOV |
| 109594-1 | COVER, BEARING | NOV |
| M614005765 | HOUSING,SPHERICAL BEARING | NOV |
| M611005230 | BEARING,SPHERICAL THRUST | NOV |
| M611004308 | KEY,BEARING | NOV |
| 30178972-NB | BEARING,NEEDLE,175 X 200 X 40 | NOV |
| 30178835 | HOUSING,BEARING | NOV |
| 16714513-001 | BEARING RETAINER ENCODER MOUNT | NOV |
| DSU 6001 Z | Bearing | |
| 6326ZS | Bearing | NOV |
| 30174875-2 | Bearing | NOV |
| 30174875-15 | Bearing | NOV |
Related products
-
Professional Supplier High Power Mud Pump for O...
The F mud pump, a distinguished member of the F-series triplex mud pump lineup, epitomizes engineering brilliance for the oil and gas realm. This magnificent pump is engineered to circulate drilling fluids (mud) with exceptional power and efficiency throughout the well drilling process. Celebrated for its extraordinary high-pressure and large-displacement capabilities, this pump is meticulously designed to be the cornerstone of both onshore and offshore operations, proving invaluable in chall...
-
API 7K TYPE SDD MAUNAL TONGS to Drill String
No.of Latch Lug Jaws No.of Hinge Pin Hole Size Pange Rated Torque in mm 1# 1 4-5 1/2 101.6-139.7 140KN·m 5 1/2-5 3/4 139.7-146 2 5 1/2-6 5/8 139.7 -168.3 6 1/2-7 1/4 165.1-184.2 3 6 5/8-7 5/8 168.3-193.7 73/4-81/2 196.9-215.9 2# 1 8 1/2-9 215.9-228.6 9 1/2-10 3/4 241.3-273 2 10 3/4-12 273-304.8 3# 1 12-12 3/4 304.8-323.8 100KN·m 2 13 3/8-14 339.7-355.6 15 381 4# 2 15 3/4 400 80KN·m 5# 2 16 406.4 17 431.8 ...
-
Wax Ball Manifold: High-Pressure Pipeline Contr...
The manifold features a main path of 70mm, with a bypass size of 45/70mm. It supports working pressures of 70MPa and 105MPa, operating temperatures from -45℃ to 121℃, and is connected via 3″ FIG1502 and 2″ FIG1502 unions. It is suitable for handling media such as fracturing fluid, fracturing sand, CO₂, and N₂, providing reliable fluid control and pipeline protection in harsh oilfield environments.
-
Drilling Stabilizer Downhole Equipment of BHA
A drilling stabilizer is a piece of downhole equipment used in the bottom hole assembly (BHA) of a drill string. It mechanically stabilizes the BHA in the borehole in order to avoid unintentional sidetracking, vibrations, and ensure the quality of the hole being drilled. It is composed of a hollow cylindrical body and stabilizing blades, both made of high-strength steel. The blades can be either straight or spiralled, and are hardf...
-
DC Drive Drawworks of Drilling Rigs High Load C...
Bearings all adopt roller ones and shafts are made of premium alloy steel. Driving chains with high accuracy and high strength are forced lubricated. The main brake adopts hydraulic disc brake, and the brake disc is water or air cooled. The auxiliary brake adopts electromagnetic eddy current brake(water or air cooled) or pneumatic push disc brake. Basic Parameters of DC Drive Drawworks: Model of rig JC40D JC50D JC70D Nominal drilling depth, m(ft) with...
-
TDS TOP DRIVE SPARE PARTS: BEARING MAIN 14P, NO...
TDS TOP DRIVE SPARE PARTS: BEARING MAIN 14P, NOV VARCO,ZT16125,ZS4720, ZS5110, Gross weight: 400kg Measured Dimension: After Order Origin : USA Price: Please contact us. MOQ: 1 VSP has always been committed to ensuring that our customers receive the highest quality oilfield products. We are Manufacturer for Top Drives and it’s spares other oilfield equipments and services to UAE oil drilling companies more than 15+ years, brand including NOV VARCO/ TESCO/ BPM /TPEC/JH SLC/HONGH...