Mud Valve: High-Performance Flow Control Valves for Harsh Oilfield Environments

Short Description:

The mud valve is a reliable, high-performance flow control device designed for use in oilfield operations, offering excellent overload and corrosion resistance under harsh conditions. Widely applied across various oilfield applications, including vertical manifold service, pump manifold isolation valves, high-pressure mud mixing pipelines, high-pressure drilling system isolation valves, wellhead equipment, drilling processing and fracturing analysis, production manifolds, production gathering systems, and production flowlines.

Send email to us

Product Detail

Product Tags

Our product line includes hard-seal mud valves in welded, union, and screwed connections, as well as 5000 PSI mud valves in welded and screwed configurations, available in 2″ and 4″ sizes to meet diverse operational requirements.

Previous: Safety Valve: High-Pressure Overpressure Protection Equipment for Oilfield Systems

Next: Parallel Gate Valve: API Spec 6A Compliant Wellhead & Manifold Control Valves

5000 PSI Mud Valve

Hard Seal Mud Valve

Mud Valve

Welded/Union/Screwed Connection

Write your message here and send it to us

Related products

Mud Pump Agitator

Model VSP55A VSP75A VSP110A VSP150A Motor power 5.5kw 7.5kw 11kw 15kw Speed 60/72rpm 60/72rpm 60/72rpm 60/72rpm Single impeller diameter 850mm 950mm 1050mm 1200mm Double impeller diameter N/A Upper:800mm Upper:850mm Upper:950mm Lower:800mm Lower:850mm Lower:950mm Reduction ratio 1900/1/1 1:01 1900/1/1 1:01 1900/1/1 1:01 25:01:00 Dimensions 1008×410×590 1033×440×640 1219×440×690 1324×495×750 Weight 280kg 320kg 430kg 550kg Stirring shaft length Determined by tank depth El...

See more products >
Triplex Single Acting Mud Pump with Piston Line...

GH3161-12.00 Small Crane GH3161-13.00 Lifting Bracket GH3161-14.00 Cover Plate GH3161-15 Gasket US Standard (No. 16) Bolt: 1/2-13UNC-2A×30 GH3161-16 Indicator Plate GH3161-17.00 Oil Level Gauge Assembly GH3161-18.00 Drain Cover GH3161-19 Sealing Washer US Standard (No. 21) Bolt: 1/2-13UNC-2A×35 GH3161-20 Crosshead Hole Cover GH3161-21 Gasket US Standard (No. 24) Bolt: 5/8-11UNC-2A×45 GB/T848-1985 Washer: 14 GB/T827-1986 Nameplate Rivet: 3×10 US Standard (No. 27) Bolt: 1-8UNC-2A×90 US Standard...

See more products >
Varco TDS Top Drive Replacement Spare Parts TDS...

P250000-9900-25 PB-ILLUM,ACTUATOR,RED P250000-9900-26 PB-MODULE,W/TERM,RED,1NO FOR 0000-9656-16 PWR-SPLY REDUNDANT M P250002-0005-31 PWR SPLY- 24V/10A,INPUT VOLTAGE 0000-6973-38 PLC-SIE,CONN,PROFI,90 DEG W/PG P250000-9688-27 SBC-CONTROLLER ASSY P800000-9686-71 PWR SPLY-FOR CX 1000 CORE WITH P800000-9686-67 CARD APPLICOM,DP1 40943311-061 PLC, Communication;Coupler;Field Bus Cou 0000-9662-95 RLY-24DC/21-21/ATEX,DPDT P250000-9699-91 RLY-24VAC/DC, 5NO, 2NC CONTACTS, 6A...

See more products >
(MT)PUMP,LUBE,GEARBOX,ASSY,TDS9S,117603,3015857...

117603 (MT)PUMP,LUBE,GEARBOX,ASSY,TDS9S 30158575 GEAR SET,HELICAL SPARE TDS-9/11 117603-1 (MT)PUMP,LUBE,GEARBOX,ASSY,TDS9S 30111013-KIT KIT, FILTER, GEAR-OIL (FILTER AND O-RING) 120684-500 ASSEMBLY,COMPOUND GEAR 120685 GEAR,CLUSTER-HELICAL

See more products >
NOV(VARCO) CABLE SERVICE LOOP

See more products >
API 7K Type DDZ Elevator 100-750 tons

DDZ series elevator are center latch elevator with 18 degree taper shoulder, applied in handling the drilling pipe and drilling tools, etc. The load ranges from 100 tons 750 tons. The size ranges from 2 3/8” to 6 5/8”. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) Remark DDZ-100 2 3/8-5 100 MG DDZ-15...

See more products >