Hook Block Assembly of Drill Rig high weight lifting

Short Description:

The hook block adopt the integrated design. The traveling block and the hook are connected by the intermediate bearing body, and the big hook and the cruiser can be separately repaired.


Product Detail

Product Tags

1. The hook block adopt the integrated design. The traveling block and the hook are connected by the intermediate bearing body, and the big hook and the cruiser can be separately repaired.
2. The inner and outer springs of the bearing body are reversed in opposite directions, which overcomes the torsion force of a single spring during compression or stretching.
3. The overall size is small, the structure is compact, and the combined length is shortened, which is suitable for use with various drilling rigs and workover rigs.

Model

YG90

YG110

YG135

YG170

YG170

YG225

kN(kips)

Rated load

900(202)

1100(247)

1350(303)

1700(382)

1700(382)

2250(506)

mm(in)

Sheave OD

609.6(24)

609.6(24)

915(36)

915(36)

915(36)

915(36)

Sheave Qty.

3

3

4

5

4

4

mm(in)

Wire line diameter

25.4(1)

25.4(1)

26/29(1/1.1)

29(1.1)

29(1.1)

32(1.3)

mm(in)

Opening size of

 hook mouth

165(6.5)

180(7.1)

180(7.1)

190(7.5)

mm(in)

Spring stroke

180(7.1)

180(7.1)

180(7.1)

180(7.1)

mm(in)

Dimension

1685×675×510

(66.3×26.6×20.1)

1685×675×512

(66.3×26.6×20.2)

3195×960×616

(125.8×37.8×24.3)

3307×960×616

(130.2×37.8×24.3)

3307×960×616

(130.2×37.8×24.3)

4585

(10108)

kg(lbs)

Weight

1010

(2227)

1000

(2205)

3590

(7915)

4585

(10108)

3450×970×850

(135.8×38.2×33.5)

4732

(10432)


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • DC Drive Drawworks of Drilling Rigs High Load Capacity

      DC Drive Drawworks of Drilling Rigs High Load C...

      Bearings all adopt roller ones and shafts are made of premium alloy steel. Driving chains with high accuracy and high strength are forced lubricated. The main brake adopts hydraulic disc brake, and the brake disc is water or air cooled. The auxiliary brake adopts electromagnetic eddy current brake(water or air cooled) or pneumatic push disc brake. Basic Parameters of DC Drive Drawworks: Model of rig JC40D JC50D JC70D Nominal drilling depth, m(ft) with...

    • Crown Block of Oil/Gas Drilling Rig with Pulley and Rope

      Crown Block of Oil/Gas Drilling Rig with Pulley...

      Technical Features: • The sheave grooves are quenched to resist wear and extend its service life. • The kick-back post and rope guard board prevent the wire rope from jumping out or falling out of the sheave grooves. • Equipped with safety chain anti-collision device. • Equipped with a gin pole for repairing the sheave block. • Sand sheaves and auxiliary sheave blocks are provided in accordance with users’ requirements. •The crown sheaves are completely interchangeab...

    • Traveling Block of oil drilling rigs high weight lifting

      Traveling Block of oil drilling rigs high weigh...

       Technical Features: • The Traveling Block is an important key equipment in the workover operation. Its main function is to form a pulley block by the sheaves of the Traveling Block and the mast , double the pulling force of the drilling rope, and bear all the downhole drill pipe or oil pipe and workover instruments through the hook. • The sheave grooves are quenched to resist wear and extend their service life. • The sheaves and bearings are interchangeable with th...

    • Mechanical Drive Drawworks on Drilling Rig

      Mechanical Drive Drawworks on Drilling Rig

      • Drawworks positive gears all adopt roller chain transmission and negative ones adopt gear transmission. • Driving chains with high accuracy and high strength are forced lubricated. • The drum body is grooved. The low-speed and high-speed ends of drum are equipped with ventilating air tube clutch. The main brake adopts belt brake or hydraulic disc brake, while the auxiliary brake adopts configured electromagnetic eddy current brake(water or air cooled). Basic Parame...

    • Elevator Link for hanging Elevator from TDS

      Elevator Link for hanging Elevator from TDS

      • Designing and manufacturing conform to API Spec 8C standard and SY/T5035 relevant technical standards etc.; • Select high-class alloy steel die to forge molding; • Intensity check uses finite element analysis and electrical measuring method stress test. There are one-arm elevator link and two-arm elevator link; Adopt two-stage shot blasting surface strengthening technology. One-arm Elevator Link Model Rated load (sh.tn) Standard working le...

    • [Super cost-effective] Second-hand Coiled Tubing Unit

      [Super cost-effective] Second-hand Coiled Tubin...