Parameter name
Parameter name
engine
Yunnei 76KW
Large pump
40/40/20Gear Pump
Maximum Drilling Depth
200M
Drilling diameter
105-273mm
Recommended working wind pressure
1.2-3.5Mpa
Drill pipe length
1.5-3m
Recommended drill pipe diameter
76-89mm
propulsive force
5T
lift force
16T
Power head travel
3.6M
Maximum turning torque
6600Nm
Maximum return speed
100r/min
Hoisting lifting force
1.5T
High leg stroke
1.3m
Walking speed
2.5km/h
Gradeability
25°
Generator/...
The Top Drive parts—-ROTATING LINK ADAPTOR ASSEMBLY improves drilling efficiency by 20%-25% through the integrated design of electromechanical and hydraulic, and has become the standard configuration of modern automated drilling.
Product Name: ROTATING LINK ADAPTOR ASSEMBLY
Brand: VARCO, TESCO, CANRIG, TPEC, JH, HH, BPM.
Applicable models: TDS8SA, TDS11SA
The belt pumping unit is a purely mechanical driven pumping unit. It is especially suitable for large pumps for lifting fluid, small pumps for deep pumping and heavy oil recovery, widely used around the world. Being equipped with international advanced technology, the pumping unit always brings satisfied economic benefits to users by offering high efficiency, reliability, safe performance and energy saving.
Main Parameters for Belt Pumping Unit:
Model
...
DDZ series elevator are center latch elevator with 18 degree taper shoulder, applied in handling the drilling pipe and drilling tools, etc. The load ranges from 100 tons 750 tons. The size ranges from 2 3/8” to 6 5/8”. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
Technical Parameters
Model
Size(in)
Rated Cap(Short Tons)
Remark
DDZ-100
2 3/8-5
100
MG
DDZ-15...