Dq20-B 150 Ton Top Drive System for 2000m Drilling Rigs
-
- Typical Parameter
| Items | Data | (British System) |
| Nominal drilling depth (114mm drill pipe) | 2000m | |
| Rated Load capacity | 1350 KN | 150 ton |
| Working height (96″ elevator link) | 5205mm | 18.24 ft |
| Rated continuous output torque | 27.5 KN.m | 20.283 lb.ft |
| Max. Torque of breakout | 41 KN.m | 30240 lb.ft |
| Static maximum brake torque | 27.5 KN.m | 20.283lb.ft |
| Speed range of main shaft (stepless adjustable) | 0~200 r/min | |
| Drill pipe range of back-up tong clamping | 85-187mm | |
| Max bore hole of back up tong | 200 mm | 7.87 in |
| Mud circulation | 64 mm | 2.5 in |
| Rated pressure of the mud circulation | 35/52 MPa | 5000/7500 Psi |
| Rotation angle of rotating head | 0-360° | |
| Speed of rotating head | 1r/min | |
| Max.tilt angle of elevator link | Forward 30°, backward 55° | |
| IBOP(double ball valves ) | Φ187 6-5/8 REG 70MPa | |
| Saver Sub ( standard ) | Φ187 6-5/8 REG NC50 | |
| Working Pressure of hydraulic system | 0~14Mpa | 0~2280 Psi |
| Voltage of EX solenoid valves | 24 VDC | |
| Rated Power of Main motor | 290KW | 388.9HP |
| Rated Speed of Main motor | 1200 r/min | |
| Rated Torque of Main motor | 2308 N·m | 1702.29 lb.ft |
| Rated Voltage of Main motor | 600 VAC | |
| Rated frequency of Main motor | 61 Hz | |
| Rated current of Main motor | 365 A | |
| Max. speed of Main motor | 2400 r/min | |
| Electricity of VFD room | 600 VAC/50Hz | |
| Suitable ambient temperature | -45ºC~55ºC | |
| Altitude | ≤1,200 m | ≤3,937ft |
| Distance between center of main shaft and center of guide rail | 532.5mm | 1.747ft |
| Incoming wire voltage of VFD room | 575~625 VAC | |
| Incoming wire frequency of VFD room | 47~53 Hz | |
- Outline dimension and weight
| Items | Data |
| Dimension of Main Body | 4740mm*970mm*1267.5mm |
| Weight of Main body | 7.4t |
| Weight of Main body (include transportation frame and one section of guide rail) | 9.14 t |
| Length of guide rail ( standard 5 sections) | 3900mm+4000mm*4+4868mm=24768mm |
| Weight of guide rail | 5.5t |
| Weight of VFD room | 7.5t |
| Dimension of VFD Room | 5050mm*2300mm*2580mm |
| Dimension of driller console | 870 mm×350 mm×300 mm |
| Weight of driller console | 30kg |
Related products
-
China Made Superior Wear-Resistant 3-1/2 Drill ...
5.01.4064.14 Hydraulic source unit 5.01.4064.15 Valve manifold system units 5.01.4064.16 Balancing mechanism unit 5.01.4064.17 Fuel tank assembly unit 5.01.4064.18 Backup clamp assembly unit 5.01.4064.19 Double pin transport rack unit 5.01.4064.20 Main junction box unit 5.01.4064.21 Top drive body end plug-in unit 5.01.4064.22 Main valve system unit 5.01.4064.23 Lubrication system unit 5.01.4064.24 Disc brake system unit 5.01.4064.25 Backup clamp assembly unit 5...
-
High Pressure Nov Hydraulic Cylinder for TDS 12...
Actuators & Cylinders Part Number Description 110704 ACTUATOR,ASSY,COUNTER BALANCE 122023 ACTUATOR,ASSY,COUNTER BALANCE 122024 ACTUATOR,ASSY,COUNTER BALANCE 30119592 ACTUATOR,ASSY 30172237 ASSY,CYL,MOTOR-ALIGN (replaces 85194) 30174224 ASSY,ALIGN,CYLINDER ,TDS-8/1000 30160685 ASSY,RH TORQUE CYL 30160684 ASSY,LH TORQUE CYL 30160444 CLAMP CYLINDER ASSY 94780 CYLINDER ASSY 3012580I-LT ASSY, CYLINDER, BYDRAULlC, LlFT (LOW TEMP) 3012580I ASSY, CYLINDER, BYDRAULlC...
-
Premium Wear-Resistant Low-Maintenance VARCO Sp...
118368 STABILIZER,ASSY,FRONT 118375 RING,GLYD,10.0 DIA-ROD 118377 COLLAR, LANDING (2 HALVES =QTY 1) 118378 RETAINER,LANDING,COLLAR 118408 TUBE,ASSY,BRAKE/MANIFOLD 118409 TUBE,ASSY,LUBE/HEAT-EXCHANGE 118410 TUBE,ASSY,ACCUMULATOR/LOAD-STEM 118456 Bearing Isolator 118463 MANIFOLD ASSY, LT CYL. 118510 ACTUATOR,ASSY,IBOP 118511 MANIFOLD,ASSY,CLAMP,CYLINDER 118563 SLEEVE,SHOT PIN 118866 BAR,ASSY,EARTHING 118947 BAR,RETAINING 118993 CABLE,INSULATED,1-CONDUCTOR 11...
-
VARCO NOV 114174 114175 Manifold Assembly for T...
92426 Protector,Pipe,Rubber,4-1/2″X6-3/4″,TDS-11,Varco 92426 92654 VALVE,CHECK,IN-LINE,.187DIA 92730 RING,SENSOR,ROTATION 94677 Wire-Rope .125 *Scd* 94679 Sleeve Oval Compression 1/8″ TDS* 94764 CYLINDER,C-BAL,5.0″*SCD* 94821 (MT)PLUG,MODIFIED, 3″NPT,W/.38NPT HOLE 94990 OIL-SEAL,BIG-BORE,TDS-S 95523 SHACKLE,ANCHOR,25-TON*SCD* 96290 TP PCB,+5V REGULATOR BD 96439 SEAL,U-CUP,4×4.5x.25 96575 Серьга 97575 VALVE,THERMOSTATIC,3-WAY ...
-
BPM 9704391720H Horizontal Section Service Loop...
89 Fitting 125 Fitting,Pipe,90°Elb 170 Fitting 191 Fitting 194 Fitting,Hyd,90°Elb,#20MJICx#20MORB 195 Fitting 196 Fitting 198 Fitting 199 Fitting,Hyd,90°Elb 200 Fitting 201 Fitting 204 Fitting,Hyd,90°Elb 212 Fitting 214 Fitting,Hyd,Str 215 Fitting,Hyd,Str,#20MNPTx#20FJIC-Swvl 216 Fitting 221 Fitting 223 Fitting, Hyd, Str, #20 227 Fitting,Hyd,Str 230 Fitting 231 Fitting 233 Fitting 235 Fitting 236 Fitting,Hyd,Str 237 Fitting Hyd Str 238 ...
-
Varco TDS Top Drive Spare Parts – Full Range Hy...
16812 ORIFICE,.25 80630 GAUGE PRESSURE, 0-3000 PSI/0-200 BAR 76790 VALVE,CONTROL,DIRECTIONAL 76417 VALVE,CONTROL,HYD 77615 VALVE,CARTRIDGE,PRESSURE-REDUCING 50104-12-C SCREW, CAP-SCK HD (UNC) 51104-C WASHER, LOCK HI-COLLAR 56705-4-4-S ELBOW, STREET 90 DEG 56506-8-12-S ELBOW, 90DEG EXT PIPE/37 56512-8-12-S ELBOW, XLONG 90-EXT PIPE37 56510-8-10-S TEE, EXT PIPE/INT PIPE/37 56517-10-8-S REDUCER, INT 37/37 (replaces 56516-10-8-) 56506-2-4-S ELBOW, 90DEG EXT/37 8274...