API Type C Manual Tongs for Oil Drilling
Type Q60-273/48(2 3/8-10 3/4in)C Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and latch steps.
Technical Parameters
| No.of Latch Lug Jaws | Short Jaw | Hinge Jaw | Size Pange | Rated Torque / KN·m | |
|
mm |
in |
||||
|
1# |
2 3/8-7 |
/ |
60.33-93.17 |
2 3/8-3.668 |
20 |
|
2# |
73.03-108 |
2 7/8-4 1/4 |
|||
|
3# |
88.9-133.35 |
3 1/2-5 1/4 |
35 |
||
|
4# |
133.35-177.8 |
5 1/4-7 |
48 |
||
|
5# |
7 5/8-10 3/4 |
7-8 5/8 |
177.8-219.08 |
7-8 5/8 |
35 |
|
6# |
9 5/8-10 3/4 |
244.5-273.05 |
9 5/8-10 3/4 |
44 |
|
Related products
-
API 7K Type DU Drill Pipe Slip Drill String Ope...
There are three types of DU series Drill Pipe Slips: DU, DUL and SDU. They are with large handling range and light weight. Thereinto, SDU slips have larger contacting areas on the taper and higher resistance strength. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Technical Parameters Mode Slip Body Size(in) 4 1/2 5 1/2 7 DP OD DP OD DP OD in mm in mm in mm DU 2 3/8 60.3 3 1/2 88.9 4 1/...
-
API 7K TYPE CD ELEVATOR Drill String Operation
Model CD side door elevators with square shoulder are suitable for handling tubing casing, drill collar in oil and natural gas drilling, well construction. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) CD-100 2 3/8-5 1/2 100 CD-150 2 3/8-14 150 CD-200 2 3/8-14 200 CD-250 2 3/8-20 250 CD-350 4 1/...
-
TYPE SJ SINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...
-
API 7K Type DD Elevator 100-750 tons
Model DD center latch elevators with square shoulder are suitable for handling tubing casing, drill collar, drill pipe, casing and tubing. The load ranges from 150 tons 350 tons. The size ranges from 2 3/8 to 5 1/2 in. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) DP Casing Tubing DD-150 2 3/8-5 1/2 4...
-
API 7K DRILL COLLAR SLIPS for Drilling line Ope...
There are three types of DCS Drill Collar Slips: S, R and L. They can accommodate drill collar from 3 inch (76.2mm) to 14 inch (355.6mm) O.D. Technical Parameters slip type drill collar OD weight insert bowl No in mm kg Ib DCS-S 3-46 3/4-8 1/4 76.2-101.6 51 112 API or No.3 4-4 7/8 101.6-123.8 47 103 DCS-R 4 1/2-6 114.3-152.4 54 120 5 1/2-7 139.7-177.8 51 112 DCS-L 6 3/4-8 1/4 171.7-209.6 70 154 8-9 1/2 203.2-241.3 78 173 8 1/2-10 215.9-254 84 185 N...
-
TYPE SPSINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...