API 7K TYPE SD ROTARY SLIPS Pipe handling tools
Technical Parameters
| Model | Slip Body Size(in) | 3 1/2 | 4 1/2 | ||||||||
| SDS-S
|
pipe size | in | 2 3/8 | 2 7/8 | 3 1/2 | ||||||
| mm | 60.3 | 73 | 88.9 | ||||||||
| weight | Kg | 39.6 | 38.3 | 80 | |||||||
| Ib | 87 | 84 | 80 | ||||||||
| SDS
|
pipe size | in | 2 3/8 | 2 7/8 | 3 1/2 | 3 1/2 | 4 | 4 1/2 | |||
| mm | 60.3 | 73 | 88.9 | 88.9 | 101.6 | 114.3 | |||||
| weight | Kg | 71 | 68 | 66 | 83 | 80 | 76 | ||||
| Ib | 156 | 150 | 145 | 183 | 176 | 167 | |||||
| SDML
|
pipe size | in | 2 3/8 | 2 7/8 | 3 1/2 | 3 1/2 | 4 | 4 1/2 | |||
| mm | 60.3 | 73 | 88.9 | 88.9 | 101.6 | 114.3 | |||||
| weight | Kg | 98 | 95 | 92 | 105 | 101 | 96 | ||||
| Ib | 216 | 209 | 202 | 231 | 222 | 211 | |||||
| SDXL | pipe size | in | 3 1/2 | 4 | 4 1/2 | ||||||
| mm | 88.9 | 101.6 | 114.3 | ||||||||
| Kg | 118-114 | 108 | |||||||||
| Ib | 260 | 251 | 238 | ||||||||
| Model | Slip Body Size(in) | 5 | 5 1/2 | 7 | |||||||
| SDS | pipe size | in | 4 | 4 1/2 | 5 | ||||||
| mm | 101.6 | 104.3 | 127 | ||||||||
| weight | Kg | 82 | 79 | 127 | |||||||
| Ib | 180 | 174 | 165 | ||||||||
| SDML | pipe size | in | 4 | 4 1/2 | 5 | 4 1/2 | 5 | 5 1/2 | |||
| mm | 101.6 | 104.3 | 127 | 114.3 | 127 | 139.7 | |||||
| weight | Kg | 103.5 | 100 | 95 | 101 | 97 | 92 | ||||
| Ib | 228 | 220 | 209 | 222 | 213 | 202 | |||||
| SDXL | pipe size | in | 4 | 4 1/2 | 5 | 4 1/2 | 5 | 5 1/2 | 5 7/8 | 6 5/8 | 7 |
| mm | 101.6 | 104.3 | 127 | 114.3 | 127 | 139.7 | 149.23 | 168.3 | 177.8 | ||
| weight | Kg | 116 | 112 | 106 | 116 | 111 | 105 | 117 | 112 | 110 | |
| Ib | 255 | 246 | 233 | 255 | 244 | 231 | 257 | 246 | 242 | ||
Related products
-
API 7K Type DDZ Elevator 100-750 tons
DDZ series elevator are center latch elevator with 18 degree taper shoulder, applied in handling the drilling pipe and drilling tools, etc. The load ranges from 100 tons 750 tons. The size ranges from 2 3/8” to 6 5/8”. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) Remark DDZ-100 2 3/8-5 100 MG DDZ-15...
-
TYPE SPSINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...
-
API 7K Type DU Drill Pipe Slip Drill String Ope...
There are three types of DU series Drill Pipe Slips: DU, DUL and SDU. They are with large handling range and light weight. Thereinto, SDU slips have larger contacting areas on the taper and higher resistance strength. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Technical Parameters Mode Slip Body Size(in) 4 1/2 5 1/2 7 DP OD DP OD DP OD in mm in mm in mm DU 2 3/8 60.3 3 1/2 88.9 4 1/...
-
API Type LF Manual Tongs for Oil Drilling
TypeQ60-178/22(2 3/8-7in)LF Manual Tong is used for making up or breaking out the screws of drill tool and casing in drilling and well servicing operation. The handing size of this type tong can be adjusted by changing latch lug jaws and handling shoulders. Technical Parameters No.of Latch Lug Jaws Latch Stop Size Pange Rated Torque mm in KN·m 1# 1 60.32-73 2 3/8-2 7/8 14 2 73-88.9 2 7/8-3 1/2 2# 1 88.9-107.95 3 1/2-4 1/4 2 107.95-127 4 1...
-
API 7K Type WWB Manual Tongs Pipe handling tools
Type Q60-273/48(2 3/8-10 3/4in)WWB Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws. Technical Parameters No.of Latch Lug Jaws Size Pange Rated Torque mm in KN·m 1# 60.3-95.25 2 3/8-3 3/4 48 2# 88.9-117.48 3 1/2-4 5/8 3# 114.3-146.05 4 1/2-4 5/8 4# 133,.35-184.15 5 1/2-5 3/4 5# 174.63-219.08 6 7/8...
-
API 7K TYPE SDD MAUNAL TONGS to Drill String
No.of Latch Lug Jaws No.of Hinge Pin Hole Size Pange Rated Torque in mm 1# 1 4-5 1/2 101.6-139.7 140KN·m 5 1/2-5 3/4 139.7-146 2 5 1/2-6 5/8 139.7 -168.3 6 1/2-7 1/4 165.1-184.2 3 6 5/8-7 5/8 168.3-193.7 73/4-81/2 196.9-215.9 2# 1 8 1/2-9 215.9-228.6 9 1/2-10 3/4 241.3-273 2 10 3/4-12 273-304.8 3# 1 12-12 3/4 304.8-323.8 100KN·m 2 13 3/8-14 339.7-355.6 15 381 4# 2 15 3/4 400 80KN·m 5# 2 16 406.4 17 431.8 ...