Rapid Delivery For Drilling Tong Jaw And Die - Truck-Mounted Rig for Oil Well Drlling – VS
Rapid Delivery For Drilling Tong Jaw And Die - Truck-Mounted Rig for Oil Well Drlling – VS Detail:
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc.
|
Rig type |
ZJ10/600 |
ZJ15/900 |
ZJ20/1350 |
ZJ30/1800 |
ZJ40/2250 |
|
|
Nominal drilling depth, m |
127mm(5″) DP |
500~800 |
700~1400 |
1100~1800 |
1500~2500 |
2000~3200 |
|
114mm(41/2″) DP |
500~1000 |
800~1500 |
1200~2000 |
1600~3000 |
2500~4000 |
|
|
Max. hook load, kN(t) |
600(60) |
900(90) |
1350(135) |
1800(180) |
2250(225) |
|
|
Drawworks |
Type |
Single drum / Double drum |
||||
|
Power, kW |
110-200 |
257-330 |
330-500 |
550 |
735 |
|
|
Drawworks lifting shifts |
5+1R |
|||||
|
Brake type |
Belt brake /Disc brake+ Rotor hydromatic brake/ Push disc water cooled brake |
|||||
|
Line number of traveling system |
Drilling line number |
6 |
8 |
|||
|
Max. line number |
8 |
10 |
||||
|
Drilling wire Dia., mm(in) |
22(7/8), 26(1) |
26(1) |
29(1 1/8) |
29(1 1/8) |
32(1 1/4) |
|
|
Rotary table opening Dia., mm (in) |
445(17 1/2), 520(20 1/2) |
520(20 1/2), 698.5(27 1/2) |
||||
|
Drill floor height, m |
3, 4, 4.5 |
4, 4.5, 5 |
4, 5 |
5, 6 |
6, 7 |
|
|
Mast type |
Mast type double section hydraulic raising |
|||||
|
Mast height, m |
31, 33, 35 |
33, 35 |
36, 38 |
38, 39 |
||
|
Max. speed, km/h |
45 |
|||||
|
Chassis drive type |
10×8 |
12×8 |
14×8 |
14×10 |
||
|
Note: The data in the table permit changing relevant parameters as per customers’ request, and will be executed as agreed by both parties. |
||||||
Product detail pictures:
Related Product Guide:
Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Rapid Delivery For Drilling Tong Jaw And Die - Truck-Mounted Rig for Oil Well Drlling – VS , The product will supply to all over the world, such as: Poland, Norwegian, Senegal, We warmly welcome you to come to visit us personally. We hope to establish a long-term friendship based on equality and mutual benefit. If you want to get in touch with us, please do not hesitate to call. We will be your best choice.
By Doris from Israel - 2017.11.12 12:31
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Michelle from Mozambique - 2018.11.28 16:25
Related products
-
Popular Design For 12 Volt Diesel Fuel Pump - ...
BPM Top Drive Spare Parts list: P/N. Specification 602020210 Flat Steel Wire Cylindrical Spiral Compression Spring 602020400 flat wire cylindroid helical-coil compression spring 970203005 Gooseneck (inch) for DQ70BSC BPM top Drive 970351002 Lock,device upper 970351003 Lock,device lower 1502030560 1705000010 1705000140 Sealant 1705000150 Thread Glue 2210170197 2210270197 IBOP 3101030170 flame-proof motor 3101030320 BPM EXPLN SUPPR MOTOR 3101030320 3101030430 flame-proof motor 3301010038 Proxim...
-
Factory Customized Metal Drill Bit - Truck-Mou...
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc. Rig type ZJ10/600 ZJ15/900 ZJ20/1350 ZJ30/1800 ZJ40/2250 Nominal drilling depth, m 127mm(5″) DP 500~800 700~1400 1100~1800 1500~2500 2000~3200 114mm(41/2″) DP 500~1000...
-
Discount Wholesale Cutler Hammer An16dno Series...
HH Top Drive Spares Parts list: Die plate 3.5 “dq020.01.12.01 № 1200437624 dq500z Die plate 4,5 “№ 1200437627 dq020.01.13.01 dq500z Die plate 5,5 “№ 1200440544 dq020.01.14.01 dq500z Die plate 6-5 / 8 “dq027.01.09.02 № 1200529267 dq500z Jaw plate 120-140 3,5 “dq026.01.09.02 № 1200525399 Jaw plate 160-180 4,5 “dq026.01.07.02 № 1200525393 dq500z Jaw plate 180-200 5,5 “№ 1200525396 dq026.01.08.02 dq500z Die bracket 6-5 / 8 “dq027.01.09.03 № 12005292...
-
High Definition Easy Out Drill Bit - Workover ...
General Description： Workover rigs made by our company are designed and manufactured in accordance with standards of API Spec Q1, 4F, 7K, 8C and relevant standards of RP500, GB3826.1, GB3826.2, GB7258, SY5202 as well as “3C” compulsory standard. Whole workover rig has a rational structure, which only occupies a small space due to its high degree of integration. Heavy load 8×6, 10×8, 12×8, 14×8 regular drive self-propelled chassis and hydraulic power steering system are ut...
-
2022 Good Quality High Torque Drill - Truck-Mo...
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc. Rig type ZJ10/600 ZJ15/900 ZJ20/1350 ZJ30/1800 ZJ40/2250 Nominal drilling depth, m 127mm(5″) DP 500~800 700~1400 1100~1800 1500~2500 2000~3200 114mm(41/2″) DP 500~1000...
-
Cheap PriceList For Electric Hand Drill Machine...
The slip type elevator is an indispensable tool in holding and hoisting drilling pipes, casing and tubing in the oil drilling and well tripping operation. It is especially suitable for the hoisting of integrated tubing sub, integral joint casing and electric submersible pump column. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size Rated Cap. mm ...