PriceList For 20mm Drill Bit - AC VF Drive Drlling Rig 1500-7000m – VS
PriceList For 20mm Drill Bit - AC VF Drive Drlling Rig 1500-7000m – VS Detail:
• Drawworks adopt main motor or independent motor to achieve automatic drilling and make real time monitoring for tripping operation and drilling condition.
• Intelligent traveling block position control has the function of preventing “bumping top and smashing bottom”.
• The drilling rig is equipped with independent driller control room. The gas, electric and hydraulic control, drilling parameters and instrument displays can be arranged unitedly so that it can achieve logic control, monitoring and protection through PLC during the whole drilling. In the mean time, it can also achieve saving, printing and remote transmission of the data. Driller can accomplish all operations in the room which can improve the working environment and decrease the labour intensity of drillers.
• It can be equipped with top drive device.
• It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted.
Type and Main Parameters:
|
Type |
ZJ40/2250DB |
ZJ50/3150DB |
ZJ70/4500DB |
ZJ90/6750DB |
|||
|
Nominal drilling depth |
2500—4000 |
3500—5000 |
4500—7000 |
6000—9000 |
|||
|
Max. hook load KN |
2250 |
3150 |
4500 |
6750 |
|||
|
Max. line number of traveling system |
10 |
12 |
12 |
14 |
|||
|
Drilling wire Dia. |
32(1 1/4) |
35 (1 3/8) |
38(1 1/2) |
45(1 3/4) |
|||
|
Sheave OD of traveling system mm(in) |
1120(44) |
1270(50) |
1524(60) |
1524(60) |
|||
|
Swivel stem through-hole Dia. mm(in) |
75(3) |
75(3) |
75(3) |
102(4) |
|||
|
Rated power of drawworks KW(hp) |
735(1000) |
1100(1500) |
1470(2000) |
2210(3000) |
|||
|
Drawwork shifts |
2 stepless speed regulating |
2 stepless speed regulating |
2 stepless speed regulating |
2 stepless speed regulating |
|||
|
Opening Dia. of rotary table mm(in) |
698.5(27 1/2) |
698.5(27 1/2) |
952.5(37 1/2) |
952.5(37 1/2) |
952.5(37 1/2) |
1257.3(49 1/2) |
|
|
Rotary table shifts |
2 stepless speed regulating |
2 stepless speed regulating |
2 stepless speed regulating |
2 stepless speed regulating |
|||
|
Single mud pump power kW(hp) |
960 (1300) |
960 (1300) |
1180 (1600) |
1180 (1600) |
1180 (1600) |
1620 (2200) |
|
|
Mast working height m(ft) |
43(142) |
45(147) |
45(147) |
48(157) |
|||
|
Drill floor height m(ft) |
7.5(25) |
7.5(25) |
9(30) |
9(30) |
10.5(35) |
10.5(35) |
12(40) |
|
Clear height of drill floor m(ft)
|
6.26 (20.5) |
6.26 (20.5) |
7.62 (25) |
7.62 (25) |
8.9 (29.5) |
8.7 (28.5) |
10 (33) |
|
Note |
AC variable frequency drive drilling rig |
||||||
Product detail pictures:
Related Product Guide:
The customer satisfaction is our primary goal. We uphold a consistent level of professionalism, quality, credibility and service for PriceList For 20mm Drill Bit - AC VF Drive Drlling Rig 1500-7000m – VS , The product will supply to all over the world, such as: Manila, Morocco, Switzerland, With the goal of "zero defect". To care for the environment, and social returns, care employee social responsibility as own duty. We welcome friends from all over the world to visit and guide us so that we can achieve the win-win goal together.
By Marcie Green from Greece - 2018.10.09 19:07
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Christopher Mabey from Oslo - 2018.09.16 11:31
Related products
-
OEM Manufacturer Mps-V34g-Pci - TOP DRIVE IBOP...
NOV Varco Top drive system Varco TDS TDS-3, TDS-3S, TDS-4, TDS-4S, TDS-5, TDS-7S Varco TDS TDS-8SA, TDS-9SA, TDS-10SA, TDS-11SA, TDS10SH, TDS11SH TDS Manufacture IBOP MODEL O.D. I.D. L thread API in mm in mm in mm VARCO hydraulic187 IBOP 110103-500 7-23/64 187 3-1/16 78 22-1/2 572 6-5/8 REG BOX-6-5/8 REG BOX manual 187 IBOP 14706-500 7-23/64 187 3-1/16 78 22-19/32 523 6-5/8 REG BOX-6-5/8 REG PIN 30177592 BALL/SEAT SET-LOWER IBOP, EXT STOP,ST BO(replaces 99497) 110186 CYLINDER,ACTU...
-
Big Discounting Dynapac Ca150 - JH Top Dive Sy...
JH Top Dive Spare Parts List P/N. Name B17010001 Straight through pressure injection cup DQ50B-GZ-02 Blowout preventer DQ50B-GZ-04 Locking device assembly DQ50-D-04（YB021.123） pump M0101201.9 O-ring NT754010308 Flushing pipe assembly NT754010308-VI Spline shaft T75020114 Tilt cylinder flow control valve T75020201234 Hydraulic cylinder T75020401 Locking device assembly T75020402 Anti loosening fixing sleeve T75020403 Anti loosening chuck T75020503 Backup tong locating pin T75020504 Guide bol...
-
Factory Best Selling Ac Drill Machine - Mechan...
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth. Mechanical Drive Drilling Rig Basic Parameters: Type ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ50/3150L(J) ZJ70/4500L Nominal drilling depth 1200—2000 1600—3000 2500—4000 3500—5000 4500—7000 Max. hook load KN 1350 1700 2250 3150 4500 ...
-
OEM/ODM China Milling Bits For Drill Press - T...
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc. Rig type ZJ10/600 ZJ15/900 ZJ20/1350 ZJ30/1800 ZJ40/2250 Nominal drilling depth, m 127mm(5″) DP 500~800 700~1400 1100~1800 1500~2500 2000~3200 114mm(41/2″) DP 500~1000...
-
One Of Hottest For 140a C Asa11 - CANRIG Top D...
Canrig Top Drive Spare Parts list: E14231 Cable N10007 Temperature Sensor N10338 Display Module N10112 Module E19-1012-010 Relay E10880 Relay N21-3002-010 Analog input module N10150 CPU M01-1001-010 “BRG,TPRD ROL,CUPCANRIGM01-1001-010 1EA M01-1063-040, AS A SET, REPLACES BOTH THE M01-1000-010 AND M01-1001-010 (M01-1001-010 HAS BECOME OBSOLETE)” M01-1002-010 BRG, TPRD ROL, CONE, 9.0 x 19.25 x 4.88 M01-1003-010 BRG, TPRD ROL, CUP, 9.0 x 19.25 x 4.88 829-18-0 PLATE, RETAINING, BUW S0...
-
High Reputation 2.5 Mm Drill Bit - Workover Ri...
General Description： Workover rigs made by our company are designed and manufactured in accordance with standards of API Spec Q1, 4F, 7K, 8C and relevant standards of RP500, GB3826.1, GB3826.2, GB7258, SY5202 as well as “3C” compulsory standard. Whole workover rig has a rational structure, which only occupies a small space due to its high degree of integration. Heavy load 8×6, 10×8, 12×8, 14×8 regular drive self-propelled chassis and hydraulic power steering system are ut...