Personlized Products Self Centering Drill Bit - DC Drive Drilling Rig/ Jackup Rig 1500-7000m – VS
Personlized Products Self Centering Drill Bit - DC Drive Drilling Rig/ Jackup Rig 1500-7000m – VS Detail:
The drawworks, rotary table and mud pump are driven by DC motors, and the rig can be used in deep well and ultra deep well operation onshore or offshore.
• It can be equipped with top drive device.
• It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted.
Type and Main Parameters of DC Drive Drilling Rig:
| Type |
ZJ40/2250DZ |
ZJ50/3150DZ |
ZJ70/4500DZ |
ZJ90/6750DZ |
|||
| Nominal drilling depth（114mm drill pipe） |
2500—4000 |
3500—5000 |
4500—7000 |
6000—9000 |
|||
| Max. hook load, KN |
2250 |
3150 |
4500 |
6750 |
|||
| Max. line number of traveling system |
10 |
12 |
12 |
14 |
|||
| mm(in)
Drilling wire Dia. |
32(1 1/4) |
35 (1 3/8) |
38(1 1/2) |
45(1 3/4) |
|||
| Sheave OD of traveling system |
1120(44) |
1270(50) |
1524(60) |
1524(60) |
|||
| Swivel stem through-hole Dia. |
75(3) |
75(3) |
75(3) |
102(4) |
|||
| Rated power of drawwork KW(hp) |
735(1000) |
1100(1500) |
1470(2000) |
2210(3000) |
|||
| Drawwork shifts |
4 |
4 |
4 |
4 |
|||
| Opening Dia. of rotary table |
698.5(27 1/2) |
698.5 (27 1/2) |
952.5 (37 1/2) |
952.5 (37 1/2) |
952.5 (37 1/2) |
1257.3 (49 1/2) |
|
| Rotary table shifts |
2 |
2 |
2 |
2 |
|||
| Single mud pump power |
960(1300) |
960 (1300) |
1180 (1600) |
1180 (1600) |
1620 (2200) |
||
| Mast working height |
43(142) |
45(147) |
45(147) |
48(157) |
|||
| Drill floor height |
7.5(25) |
7.5(25) |
9(30) |
9(30) |
10.5 (35) |
10.5 (35) |
12(40) |
| Clear height of drill floor |
6.26(20.5) |
6.26 (20.5) |
7.62 (25) |
7.42(24.5) |
8.92(29.5) |
8.7 (28.5) |
10(33) |
| Note |
DZ——DC drive drilling rig |
||||||
Product detail pictures:
Related Product Guide:
Quality comes first; service is foremost; business is cooperation" is our business philosophy which is constantly observed and pursued by our company for Personlized Products Self Centering Drill Bit - DC Drive Drilling Rig/ Jackup Rig 1500-7000m – VS , The product will supply to all over the world, such as: kazakhstan, Bangladesh, Holland, We look forward to hearing from you, whether you are a returning customer or a new one. We hope you will find what you are looking for here, if not, please contact us immediately. We pride ourselves on top notch customer service and response. Thank you for your business and support!
By Diana from Johor - 2017.02.18 15:54
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By EliecerJimenez from Turkey - 2018.09.29 13:24
Related products
-
Factory Customized 9mm Drill Bit - DC Drive Dr...
The drawworks, rotary table and mud pump are driven by DC motors, and the rig can be used in deep well and ultra deep well operation onshore or offshore. • It can be equipped with top drive device. • It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted. Type and Main Parameters of DC Drive Drilling Rig: Type ZJ40/2250DZ ZJ50/3150DZ ZJ70/4500DZ ZJ90/6750DZ Nominal drilling...
-
Online Exporter Pedestal Pump - TESCO Top Driv...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
Hot-Selling Spiral Drill Bit - DC Drive Drilli...
The drawworks, rotary table and mud pump are driven by DC motors, and the rig can be used in deep well and ultra deep well operation onshore or offshore. • It can be equipped with top drive device. • It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted. Type and Main Parameters of DC Drive Drilling Rig: Type ZJ40/2250DZ ZJ50/3150DZ ZJ70/4500DZ ZJ90/6750DZ Nominal drilling...
-
Professional China Parker F400s - TESCO Top Dr...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
2022 Good Quality 6ttt 316 Mm - TESCO Top Driv...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
OEM China Compact Drill Press - Workover Rig f...
General Description： Workover rigs made by our company are designed and manufactured in accordance with standards of API Spec Q1, 4F, 7K, 8C and relevant standards of RP500, GB3826.1, GB3826.2, GB7258, SY5202 as well as “3C” compulsory standard. Whole workover rig has a rational structure, which only occupies a small space due to its high degree of integration. Heavy load 8×6, 10×8, 12×8, 14×8 regular drive self-propelled chassis and hydraulic power steering system are ut...