OEM China Drilling Rotating System - Mechanical Drive Drilling Rig – VS
OEM China Drilling Rotating System - Mechanical Drive Drilling Rig – VS Detail:
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth.
Mechanical Drive Drilling Rig Basic Parameters:
|
Type |
ZJ20/1350L(J) |
ZJ30/1700L(J) |
ZJ40/2250L(J) |
ZJ50/3150L(J) |
ZJ70/4500L |
||
|
Nominal drilling depth |
1200—2000 |
1600—3000 |
2500—4000 |
3500—5000 |
4500—7000 |
||
|
Max. hook load KN |
1350 |
1700 |
2250 |
3150 |
4500 |
||
|
Max. line number of traveling system |
8 |
10 |
10 |
12 |
12 |
||
|
Drilling wire Dia. mm(in) |
29(1 1/8) |
32(1 1/4) |
32(1 1/4) |
35 (1 3/8) |
38(1 1/2) |
||
|
Sheave OD of traveling system mm |
915 |
915 |
1120 |
1270 |
1524 |
||
|
Swivel stem through-hole Dia. mm(in) |
64 ( 2 1/2) |
64 ( 2 1/2) |
75 ( 3 ) |
75 ( 3 ) |
75 ( 3) |
||
|
Rated power of drawworks KW（hp） |
400(550) |
550(750) |
735(1000) |
1100(1500) |
1470(2000) |
||
|
Drawworks shifts |
3 forward+ 1 reverse |
3 forward+ 1 reverse |
4forward+ 2 reverse |
6 forward+
2 reverse |
4forward+ 2 reverse |
6 forward+ 2reverse |
6 forward+ 2reverse |
|
Opening Dia. of rotary table mm(in) |
445(17 1/2) |
520.7(20 1/2) 698.5(27 1/2) |
698.5(27 1/2) |
698.5(27 1/2) 952.5(37 1/2) |
952.5(37 1/2) |
||
|
Rotary table shifts |
3 forward+ 1 reverse |
3 forward+ 1 reverse |
4forward+ 2 reverse |
6forward+ 2reverse |
4forward+ 2 reverse |
6forward+ 2reverse |
6 forward+ 2reverse |
|
Single mud pump power kW(hp) |
735(1000) |
735(1000) |
960(1300) |
1180(1600) |
1180(1600) |
||
|
Transmission number |
2 |
2 |
3 |
3 |
4 |
||
|
Mast working height m(ft) |
31.5（103） |
31.5（103） |
43（141） |
45（147.5） |
45（147.5） |
||
|
Drill floor height m(ft)
|
4.5（14.8） |
4.5（14.8） |
6 （19.7） |
7.5（ 24.6 ） |
9（29.5） |
||
|
Clear height of drill floor m(ft) |
3.54（11.6） |
3.44（11.3） |
4.7（15.4） |
6.26（20.5）
|
7.7（25.3）
|
||
|
Note |
L—Chain compounding drive, J—Narrow V belt compounding drive |
||||||
Product detail pictures:
Related Product Guide:
Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of OEM China Drilling Rotating System - Mechanical Drive Drilling Rig – VS , The product will supply to all over the world, such as: Mozambique, Muscat, Czech Republic, With a team of experienced and knowledgeable personnel, our market covers South America, the USA, the Mid East, and North Africa. Many customers have become our friends after good cooperation with us. If you have the requirement for any of our goods, make sure you contact us now. We're looking forward to hearing from you soon.
By Jerry from Oman - 2017.12.02 14:11
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Lee from Tunisia - 2017.08.21 14:13
Related products
-
Factory Wholesale 67cfr 362 - BPMC Top Drive (...
BPM Top Drive Spare Parts list: P/N. Specification 602020210 Flat Steel Wire Cylindrical Spiral Compression Spring 602020400 flat wire cylindroid helical-coil compression spring 970203005 Gooseneck (inch) for DQ70BSC BPM top Drive 970351002 Lock,device upper 970351003 Lock,device lower 1502030560 1705000010 1705000140 Sealant 1705000150 Thread Glue 2210170197 2210270197 IBOP 3101030170 flame-proof motor 3101030320 BPM EXPLN SUPPR MOTOR 3101030320 3101030430 flame-proof motor 3301010038 Proxim...
-
Low MOQ For Bei H20db - VARCO (NOV) Top Drive ...
VARCO (NOV) Top Drive Spare Parts list: PART NUMBER DESCRIPTION 11085 RING,HEAD,CYLINDER 31263 SEAL, POLYPAK, DEEP 49963 SPRING, LOCK 50000 PKG, STICK, INJECTION, PLASTIC 53208 SPART,FTG, GREASE STR, DRIVE 53408 PLUG, PLASTIC PIPE CLOSURE 71613 BREATHER,RESERVOIR 71847 CAM FOLLOWER 72219 SEAL,PISTON 72220 SEAL ROD 72221 WIPER, ROD 76442 GUIDE, ARM 76443 COMPRESSION SPRING 1.95 76841 TDS-3 SWITCH PRESSURE EEX 77039 SEAL,LIP 8.25×9.5x.62 77039 SEAL,LIP 8.25×9.5x.62 78916 NUT,FIXING*SC...
-
Rapid Delivery For Ps4 Ribbon - TESCO Top Driv...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
Factory Made Hot-Sale Simple Drill Machine - W...
General Description： Workover rigs made by our company are designed and manufactured in accordance with standards of API Spec Q1, 4F, 7K, 8C and relevant standards of RP500, GB3826.1, GB3826.2, GB7258, SY5202 as well as “3C” compulsory standard. Whole workover rig has a rational structure, which only occupies a small space due to its high degree of integration. Heavy load 8×6, 10×8, 12×8, 14×8 regular drive self-propelled chassis and hydraulic power steering system are ut...
-
High Reputation 2.5 Mm Drill Bit - AC VF Drive...
• Drawworks adopt main motor or independent motor to achieve automatic drilling and make real time monitoring for tripping operation and drilling condition. • Intelligent traveling block position control has the function of preventing “bumping top and smashing bottom”. • The drilling rig is equipped with independent driller control room. The gas, electric and hydraulic control, drilling parameters and instrument displays can be arranged unitedly so that it can achieve logic control, monitorin...
-
Factory Price For Fdc3030l - CANRIG Top Drive ...
Canrig Top Drive Spare Parts list: E14231 Cable N10007 Temperature Sensor N10338 Display Module N10112 Module E19-1012-010 Relay E10880 Relay N21-3002-010 Analog input module N10150 CPU M01-1001-010 “BRG,TPRD ROL,CUPCANRIGM01-1001-010 1EA M01-1063-040, AS A SET, REPLACES BOTH THE M01-1000-010 AND M01-1001-010 (M01-1001-010 HAS BECOME OBSOLETE)” M01-1002-010 BRG, TPRD ROL, CONE, 9.0 x 19.25 x 4.88 M01-1003-010 BRG, TPRD ROL, CUP, 9.0 x 19.25 x 4.88 829-18-0 PLATE, RETAINING, BUW S0...