Hot-Selling 2 Inch Drill Bit - AC VF Drive Drlling Rig 1500-7000m – VS
Hot-Selling 2 Inch Drill Bit - AC VF Drive Drlling Rig 1500-7000m – VS Detail:
• Drawworks adopt main motor or independent motor to achieve automatic drilling and make real time monitoring for tripping operation and drilling condition.
• Intelligent traveling block position control has the function of preventing “bumping top and smashing bottom”.
• The drilling rig is equipped with independent driller control room. The gas, electric and hydraulic control, drilling parameters and instrument displays can be arranged unitedly so that it can achieve logic control, monitoring and protection through PLC during the whole drilling. In the mean time, it can also achieve saving, printing and remote transmission of the data. Driller can accomplish all operations in the room which can improve the working environment and decrease the labour intensity of drillers.
• It can be equipped with top drive device.
• It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted.
Type and Main Parameters:
|
Type |
ZJ40/2250DB |
ZJ50/3150DB |
ZJ70/4500DB |
ZJ90/6750DB |
|||
|
Nominal drilling depth |
2500—4000 |
3500—5000 |
4500—7000 |
6000—9000 |
|||
|
Max. hook load KN |
2250 |
3150 |
4500 |
6750 |
|||
|
Max. line number of traveling system |
10 |
12 |
12 |
14 |
|||
|
Drilling wire Dia. |
32(1 1/4) |
35 (1 3/8) |
38(1 1/2) |
45(1 3/4) |
|||
|
Sheave OD of traveling system mm(in) |
1120(44) |
1270(50) |
1524(60) |
1524(60) |
|||
|
Swivel stem through-hole Dia. mm(in) |
75(3) |
75(3) |
75(3) |
102(4) |
|||
|
Rated power of drawworks KW(hp) |
735(1000) |
1100(1500) |
1470(2000) |
2210(3000) |
|||
|
Drawwork shifts |
2 stepless speed regulating |
2 stepless speed regulating |
2 stepless speed regulating |
2 stepless speed regulating |
|||
|
Opening Dia. of rotary table mm(in) |
698.5(27 1/2) |
698.5(27 1/2) |
952.5(37 1/2) |
952.5(37 1/2) |
952.5(37 1/2) |
1257.3(49 1/2) |
|
|
Rotary table shifts |
2 stepless speed regulating |
2 stepless speed regulating |
2 stepless speed regulating |
2 stepless speed regulating |
|||
|
Single mud pump power kW(hp) |
960 (1300) |
960 (1300) |
1180 (1600) |
1180 (1600) |
1180 (1600) |
1620 (2200) |
|
|
Mast working height m(ft) |
43(142) |
45(147) |
45(147) |
48(157) |
|||
|
Drill floor height m(ft) |
7.5(25) |
7.5(25) |
9(30) |
9(30) |
10.5(35) |
10.5(35) |
12(40) |
|
Clear height of drill floor m(ft)
|
6.26 (20.5) |
6.26 (20.5) |
7.62 (25) |
7.62 (25) |
8.9 (29.5) |
8.7 (28.5) |
10 (33) |
|
Note |
AC variable frequency drive drilling rig |
||||||
Product detail pictures:
Related Product Guide:
"Based on domestic market and expand overseas business" is our development strategy for Hot-Selling 2 Inch Drill Bit - AC VF Drive Drlling Rig 1500-7000m – VS , The product will supply to all over the world, such as: Danish, Lesotho, Azerbaijan, We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.
By Heloise from Muscat - 2017.09.09 10:18
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Althea from Gabon - 2018.09.29 13:24
Related products
-
Hot Sale Factory Gear Hydraulic Pump - TOP DRI...
NOV Varco Top drive system Varco TDS TDS-3, TDS-3S, TDS-4, TDS-4S, TDS-5, TDS-7S Varco TDS TDS-8SA, TDS-9SA, TDS-10SA, TDS-11SA, TDS10SH, TDS11SH TDS Manufacture IBOP MODEL O.D. I.D. L thread API in mm in mm in mm VARCO hydraulic187 IBOP 110103-500 7-23/64 187 3-1/16 78 22-1/2 572 6-5/8 REG BOX-6-5/8 REG BOX manual 187 IBOP 14706-500 7-23/64 187 3-1/16 78 22-19/32 523 6-5/8 REG BOX-6-5/8 REG PIN 30177592 BALL/SEAT SET-LOWER IBOP, EXT STOP,ST BO(replaces 99497) 110186 CYLINDER,ACTU...
-
OEM/ODM Supplier Best Drill - DC Drive Drillin...
The drawworks, rotary table and mud pump are driven by DC motors, and the rig can be used in deep well and ultra deep well operation onshore or offshore. • It can be equipped with top drive device. • It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted. Type and Main Parameters of DC Drive Drilling Rig: Type ZJ40/2250DZ ZJ50/3150DZ ZJ70/4500DZ ZJ90/6750DZ Nominal drilling...
-
Factory Wholesale Horizontal Auger Boring Machi...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
100% Original Best Cordless Combo Kit - BPMC T...
BPM Top Drive Spare Parts list: P/N. Specification 602020210 Flat Steel Wire Cylindrical Spiral Compression Spring 602020400 flat wire cylindroid helical-coil compression spring 970203005 Gooseneck (inch) for DQ70BSC BPM top Drive 970351002 Lock,device upper 970351003 Lock,device lower 1502030560 1705000010 1705000140 Sealant 1705000150 Thread Glue 2210170197 2210270197 IBOP 3101030170 flame-proof motor 3101030320 BPM EXPLN SUPPR MOTOR 3101030320 3101030430 flame-proof motor 3301010038 Proxim...
-
8 Year Exporter EMI400 - VARCO (NOV) Top Drive...
VARCO (NOV) Top Drive Spare Parts list: PART NUMBER DESCRIPTION 11085 RING,HEAD,CYLINDER 31263 SEAL, POLYPAK, DEEP 49963 SPRING, LOCK 50000 PKG, STICK, INJECTION, PLASTIC 53208 SPART,FTG, GREASE STR, DRIVE 53408 PLUG, PLASTIC PIPE CLOSURE 71613 BREATHER,RESERVOIR 71847 CAM FOLLOWER 72219 SEAL,PISTON 72220 SEAL ROD 72221 WIPER, ROD 76442 GUIDE, ARM 76443 COMPRESSION SPRING 1.95 76841 TDS-3 SWITCH PRESSURE EEX 77039 SEAL,LIP 8.25×9.5x.62 77039 SEAL,LIP 8.25×9.5x.62 78916 NUT,FIXING*SC...
-
Good User Reputation For Hand Pump Sprayer Part...
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10 3/4 219.1-273.1 11 3/4-...