Hot New Products Pneumatic Drilling Machine - Mechanical Drive Drilling Rig – VS
Hot New Products Pneumatic Drilling Machine - Mechanical Drive Drilling Rig – VS Detail:
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth.
Mechanical Drive Drilling Rig Basic Parameters:
|
Type |
ZJ20/1350L(J) |
ZJ30/1700L(J) |
ZJ40/2250L(J) |
ZJ50/3150L(J) |
ZJ70/4500L |
||
|
Nominal drilling depth |
1200—2000 |
1600—3000 |
2500—4000 |
3500—5000 |
4500—7000 |
||
|
Max. hook load KN |
1350 |
1700 |
2250 |
3150 |
4500 |
||
|
Max. line number of traveling system |
8 |
10 |
10 |
12 |
12 |
||
|
Drilling wire Dia. mm(in) |
29(1 1/8) |
32(1 1/4) |
32(1 1/4) |
35 (1 3/8) |
38(1 1/2) |
||
|
Sheave OD of traveling system mm |
915 |
915 |
1120 |
1270 |
1524 |
||
|
Swivel stem through-hole Dia. mm(in) |
64 ( 2 1/2) |
64 ( 2 1/2) |
75 ( 3 ) |
75 ( 3 ) |
75 ( 3) |
||
|
Rated power of drawworks KW（hp） |
400(550) |
550(750) |
735(1000) |
1100(1500) |
1470(2000) |
||
|
Drawworks shifts |
3 forward+ 1 reverse |
3 forward+ 1 reverse |
4forward+ 2 reverse |
6 forward+
2 reverse |
4forward+ 2 reverse |
6 forward+ 2reverse |
6 forward+ 2reverse |
|
Opening Dia. of rotary table mm(in) |
445(17 1/2) |
520.7(20 1/2) 698.5(27 1/2) |
698.5(27 1/2) |
698.5(27 1/2) 952.5(37 1/2) |
952.5(37 1/2) |
||
|
Rotary table shifts |
3 forward+ 1 reverse |
3 forward+ 1 reverse |
4forward+ 2 reverse |
6forward+ 2reverse |
4forward+ 2 reverse |
6forward+ 2reverse |
6 forward+ 2reverse |
|
Single mud pump power kW(hp) |
735(1000) |
735(1000) |
960(1300) |
1180(1600) |
1180(1600) |
||
|
Transmission number |
2 |
2 |
3 |
3 |
4 |
||
|
Mast working height m(ft) |
31.5（103） |
31.5（103） |
43（141） |
45（147.5） |
45（147.5） |
||
|
Drill floor height m(ft)
|
4.5（14.8） |
4.5（14.8） |
6 （19.7） |
7.5（ 24.6 ） |
9（29.5） |
||
|
Clear height of drill floor m(ft) |
3.54（11.6） |
3.44（11.3） |
4.7（15.4） |
6.26（20.5）
|
7.7（25.3）
|
||
|
Note |
L—Chain compounding drive, J—Narrow V belt compounding drive |
||||||
Product detail pictures:
Related Product Guide:
Our pursuit and corporation aim should be to "Always satisfy our consumer requirements". We carry on to build and style and design remarkable quality items for both our outdated and new clients and reach a win-win prospect for our clients at the same time as us for Hot New Products Pneumatic Drilling Machine - Mechanical Drive Drilling Rig – VS , The product will supply to all over the world, such as: Uganda, Seattle, Qatar, Our products have mainly exported to south-east Asia Euro-America, and sales to all of our country. And depending on excellent quality, reasonable price, best service, we have got good feedback from customers overseas. You are welcomed to join us for more possibilities and benefits. We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
By Alexander from Argentina - 2017.11.11 11:41
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Heather from Buenos Aires - 2018.12.22 12:52
Related products
-
Cheap PriceList For Gardner Denver Pah - JH To...
JH Top Dive Spare Parts List P/N. Name B17010001 Straight through pressure injection cup DQ50B-GZ-02 Blowout preventer DQ50B-GZ-04 Locking device assembly DQ50-D-04（YB021.123） pump M0101201.9 O-ring NT754010308 Flushing pipe assembly NT754010308-VI Spline shaft T75020114 Tilt cylinder flow control valve T75020201234 Hydraulic cylinder T75020401 Locking device assembly T75020402 Anti loosening fixing sleeve T75020403 Anti loosening chuck T75020503 Backup tong locating pin T75020504 Guide bol...
-
Hot Selling For 1250AC - TOP DRIVE IBOP –...
NOV Varco Top drive system Varco TDS TDS-3, TDS-3S, TDS-4, TDS-4S, TDS-5, TDS-7S Varco TDS TDS-8SA, TDS-9SA, TDS-10SA, TDS-11SA, TDS10SH, TDS11SH TDS Manufacture IBOP MODEL O.D. I.D. L thread API in mm in mm in mm VARCO hydraulic187 IBOP 110103-500 7-23/64 187 3-1/16 78 22-1/2 572 6-5/8 REG BOX-6-5/8 REG BOX manual 187 IBOP 14706-500 7-23/64 187 3-1/16 78 22-19/32 523 6-5/8 REG BOX-6-5/8 REG PIN 30177592 BALL/SEAT SET-LOWER IBOP, EXT STOP,ST BO(replaces 99497) 110186 CYLINDER,ACTU...
-
China Gold Supplier For Water Pump Dc Motor - ...
Canrig Top Drive Spare Parts list: E14231 Cable N10007 Temperature Sensor N10338 Display Module N10112 Module E19-1012-010 Relay E10880 Relay N21-3002-010 Analog input module N10150 CPU M01-1001-010 “BRG,TPRD ROL,CUPCANRIGM01-1001-010 1EA M01-1063-040, AS A SET, REPLACES BOTH THE M01-1000-010 AND M01-1001-010 (M01-1001-010 HAS BECOME OBSOLETE)” M01-1002-010 BRG, TPRD ROL, CONE, 9.0 x 19.25 x 4.88 M01-1003-010 BRG, TPRD ROL, CUP, 9.0 x 19.25 x 4.88 829-18-0 PLATE, RETAINING, BUW S0...
-
Reasonable Price Cnc Drilling Machine Price - ...
General Description： Workover rigs made by our company are designed and manufactured in accordance with standards of API Spec Q1, 4F, 7K, 8C and relevant standards of RP500, GB3826.1, GB3826.2, GB7258, SY5202 as well as “3C” compulsory standard. Whole workover rig has a rational structure, which only occupies a small space due to its high degree of integration. Heavy load 8×6, 10×8, 12×8, 14×8 regular drive self-propelled chassis and hydraulic power steering system are ut...
-
Discountable Price 6mm Tile Drill Bit - Mechan...
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth. Mechanical Drive Drilling Rig Basic Parameters: Type ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ50/3150L(J) ZJ70/4500L Nominal drilling depth 1200—2000 1600—3000 2500—4000 3500—5000 4500—7000 Max. hook load KN 1350 1700 2250 3150 4500 ...
-
PriceList For Spade Drill Bit - Workover Rig f...
General Description： Workover rigs made by our company are designed and manufactured in accordance with standards of API Spec Q1, 4F, 7K, 8C and relevant standards of RP500, GB3826.1, GB3826.2, GB7258, SY5202 as well as “3C” compulsory standard. Whole workover rig has a rational structure, which only occupies a small space due to its high degree of integration. Heavy load 8×6, 10×8, 12×8, 14×8 regular drive self-propelled chassis and hydraulic power steering system are ut...