High Quality Gearhead Drill Press - Truck-Mounted Rig for Oil Well Drlling – VS
High Quality Gearhead Drill Press - Truck-Mounted Rig for Oil Well Drlling – VS Detail:
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc.
|
Rig type |
ZJ10/600 |
ZJ15/900 |
ZJ20/1350 |
ZJ30/1800 |
ZJ40/2250 |
|
|
Nominal drilling depth, m |
127mm(5″) DP |
500~800 |
700~1400 |
1100~1800 |
1500~2500 |
2000~3200 |
|
114mm(41/2″) DP |
500~1000 |
800~1500 |
1200~2000 |
1600~3000 |
2500~4000 |
|
|
Max. hook load, kN(t) |
600(60) |
900(90) |
1350(135) |
1800(180) |
2250(225) |
|
|
Drawworks |
Type |
Single drum / Double drum |
||||
|
Power, kW |
110-200 |
257-330 |
330-500 |
550 |
735 |
|
|
Drawworks lifting shifts |
5+1R |
|||||
|
Brake type |
Belt brake /Disc brake+ Rotor hydromatic brake/ Push disc water cooled brake |
|||||
|
Line number of traveling system |
Drilling line number |
6 |
8 |
|||
|
Max. line number |
8 |
10 |
||||
|
Drilling wire Dia., mm(in) |
22(7/8), 26(1) |
26(1) |
29(1 1/8) |
29(1 1/8) |
32(1 1/4) |
|
|
Rotary table opening Dia., mm (in) |
445(17 1/2), 520(20 1/2) |
520(20 1/2), 698.5(27 1/2) |
||||
|
Drill floor height, m |
3, 4, 4.5 |
4, 4.5, 5 |
4, 5 |
5, 6 |
6, 7 |
|
|
Mast type |
Mast type double section hydraulic raising |
|||||
|
Mast height, m |
31, 33, 35 |
33, 35 |
36, 38 |
38, 39 |
||
|
Max. speed, km/h |
45 |
|||||
|
Chassis drive type |
10×8 |
12×8 |
14×8 |
14×10 |
||
|
Note: The data in the table permit changing relevant parameters as per customers’ request, and will be executed as agreed by both parties. |
||||||
Product detail pictures:
Related Product Guide:
Normally customer-oriented, and it's our ultimate concentrate on for being not only one of the most dependable, trustable and honest supplier, but also the partner for our shoppers for High Quality Gearhead Drill Press - Truck-Mounted Rig for Oil Well Drlling – VS , The product will supply to all over the world, such as: Bhutan, Finland, Johannesburg, With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in beauty and other industries. Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.
By Edwina from Tajikistan - 2017.08.18 18:38
The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme", we have always maintained business cooperation. Work with you,we feel easy!
By Julia from Swedish - 2018.06.18 17:25
Related products
-
Bottom Price L30 08 000 - TESCO Top Drive Syst...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
Chinese Wholesale Mill Drill - DC Drive Drilli...
The drawworks, rotary table and mud pump are driven by DC motors, and the rig can be used in deep well and ultra deep well operation onshore or offshore. • It can be equipped with top drive device. • It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted. Type and Main Parameters of DC Drive Drilling Rig: Type ZJ40/2250DZ ZJ50/3150DZ ZJ70/4500DZ ZJ90/6750DZ Nominal drilling...
-
Factory Promotional Gardner Denver Pz 9 Mud Pum...
BPM Top Drive Spare Parts list: P/N. Specification 602020210 Flat Steel Wire Cylindrical Spiral Compression Spring 602020400 flat wire cylindroid helical-coil compression spring 970203005 Gooseneck (inch) for DQ70BSC BPM top Drive 970351002 Lock,device upper 970351003 Lock,device lower 1502030560 1705000010 1705000140 Sealant 1705000150 Thread Glue 2210170197 2210270197 IBOP 3101030170 flame-proof motor 3101030320 BPM EXPLN SUPPR MOTOR 3101030320 3101030430 flame-proof motor 3301010038 Proxim...
-
Cheap PriceList For Xtra Power Drill - Workove...
General Description： Workover rigs made by our company are designed and manufactured in accordance with standards of API Spec Q1, 4F, 7K, 8C and relevant standards of RP500, GB3826.1, GB3826.2, GB7258, SY5202 as well as “3C” compulsory standard. Whole workover rig has a rational structure, which only occupies a small space due to its high degree of integration. Heavy load 8×6, 10×8, 12×8, 14×8 regular drive self-propelled chassis and hydraulic power steering system are ut...
-
Renewable Design For Diaphragm Water Pump 12v P...
TPEC Top Drive Spare Parts list: PN. Name 1.07.14.001 Brake block 1.07.08.002 key 2.3.04.003 Brake (bracket) 2.4.25.011 Steel pipe u 2.4.25.025 Steel pipe (H) 2.4.25.013 Steel pipe П 2.4.34.073 Fittings, cross-over sub 2.4.34.047 Fittings, cross-over sub 2.4.34.074 Fittings, four-way sub 2.4.34.089 Pipe fitting,tee sub 1.10.05.007 pulley 1.03.15.204 Lock nut 1.08.10.005 IBOP actuator 1.08.03.013 Upper IBOP 1.08.04.008 Lower IBOP 2.4.25.028 Steel pipe 2.4.25.018 Steel pipe c 2.4.25.027 Steel p...
-
China New Product Percussion Drilling Machine -...
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc. Rig type ZJ10/600 ZJ15/900 ZJ20/1350 ZJ30/1800 ZJ40/2250 Nominal drilling depth, m 127mm(5″) DP 500~800 700~1400 1100~1800 1500~2500 2000~3200 114mm(41/2″) DP 500~1000...