High Durability Wash Pipe Spare Parts for Oilfield Top Drive System Drilling Rig
Below is the spare parts reference list for TDS top drive, including part numbers and corresponding component descriptions. Please verify the part numbers to match your equipment requirements.
| 79824 | CAM-FOLLOWER,1.0DIAx.62STUD |
| 79825 | BEARING,DRAWN-CUP,1.62DIA |
| 79854 | BALL-BEARING,11″IDX13″OD,ROT.PH.TDS |
| 80430 | TUBING,.25OD,POLYETHYLENE*SCD* |
| 80492 | JAW ASSY,WRENCH |
| 80569 | Nut,Hex,Jam,2.0-12 UN,TDS-11,Varco 80569 |
| 80630 | GAUGE PRESSURE, 0-3000 PSI/0-200 BAR |
| 81153 | ELBOW,S-PIPE,WELDMENT |
| 81158 | NUT, LUG, 4.0, S-PIPE |
| 81597 | BLOCK,TERMINAL,12-POSITION*SCD* |
| 81691 | LOCKNUT,BEARING*SCD* |
| 82106 | STOP |
| 82747 | FILTER, ASSEMBLY |
| 82838 | CHAIN,.5 |
| 83095 | Pressure switch |
| 83324 | COMPOUND,ANTI-SEIZE*SCD* |
| 84617 | S-PIPE,ELBOW 7500 |
| 85039 | PLATE,TERMINAL,PARTITION |
| 86268 | Dessicant (3X3) |
| 87052 | WASHER,LOCK,TAB,.40 |
| 87124 | HORN,ALARM,24VDC,DC |
| SCCA-LDN | valve |
| 87605 | KIT,SEAL,REPAIR-PACK,ACCUMULATOR |
| 87975 | CABLE,2,4-COND,TW.PR,IND/SHIELD-PVC*SCD* |
| 88096 | SEAL,LIP,12.5X13.75X.625 |
| 88098 | RING,GLYD,11.5X11.9X.20 |
| 88099 | BEARING,BALL,12.0X14.0X1.0 |
| 88302 | GASKET,CAP,EXCLUDER |
| 88491 | ELBOW,MALE,POLY-FLO,1/4X1/8,TP*SCD* |
| 88493 | ELBOW,FEMALE,1/4X1/8,POLY-FLO,TP*SCD* |
| 88588 | GASKET,GEAR,CASE {SET OF 4 PCS} |
| 88600 | BEARING,ROLLER,CYLINDRICAL,5.12X7.87 |
| 88601 | NUT,LOCK,BEARING,AN26 |
| 88602 | NUT,LOCK,BEARING,AN28 |
| 88603 | WASHER,LOCK,BEARING,W26 |
| 88604 | WASHER,LOCK,BEARING,W28 |
| 88605 | BUSHING,UPPER |
| 88606 | BUSHING,LOWER |
| 88650 | LUBRICANT,SILICONE |
| 88663 | J-BOX,HORN,DC*SCD* |
| 88710 | Strap (P) |
| 88859 | GASKET,GEAR,CASING |
| 88862 | BUSHING,SLEEVE,2.25X2.50X.38 |
| 88946 | GEAR,SPUR |
| 88947 | HOUSING,ADAPTER,TORQUE,LIMIT |
| 88948 | HOUSING,GEAR-CHANGER |
| 88949 | SHAFT,GEAR-CHANGER |
| 88950 | SPRING,PLUNGER,1/4-20 |
| 88953 | SEAL,CUP,2-1/2,NITRILE |
| 88956 | GASKET,GEAR-CHANGER |
| 88991 | PLUG,REDUCING,FLOW |
| 89016 | SPRING,DIE,.50X1.0X6.0LG |
| 89037 | SCREW,HEX-HEAD,.5-13UNX5.8LG |
| 89062 | CLUTCH |
| 89071 | BUSHING,FLANGED,1.62X1.75X.75LG |
| 89072 | BUSHING,SHAFT,GENEVA |
| 89195 | BEARING,THRUST,1.0ID |
| 89196 | SPRING,COMPRESSION,0.6OD |
| 89244 | BUSHING,SLEEVE,1.73X1.86X.5LG |
| 90133 | O-RING,32.19DIAX.275 |
| 90153 | CLAMP,END,H-RAIL |
| 90477 | SPRING,COMPRESSION,2.75IDX19.25L |
| 90481 | SEAL,POLYPAK(R),1.75X1.50X.12 |
| 90851 | JAW,PH |
| 90852 | SPACER,JAW,8 5/8-5 1/4 |
| 90858 | SPACER,.509X.750X.5LG |
| 91046 | BUSHING,PIN,BAIL |
| 91073 | CENTRALIZER,SPRING |
| 1.08.03.025 | DQ50/70（外定位） |
| 91252 | BEARING,ROLLER,CYLINDRICAL,10.23X18.9X3. |
| 91255 | SEAL,HOUSING |
| 91923 | Seal,TDS-11,Varco 91923 |
| 92426 | Protector,Pipe,Rubber,4-1/2″X6-3/4″,TDS-11,Varco 92426 |
| 92654 | VALVE,CHECK,IN-LINE,.187DIA |
| 92730 | RING,SENSOR,ROTATION |
| 94677 | Wire-Rope .125 *Scd* |
| 94679 | Sleeve Oval Compression 1/8″ TDS* |
| 94764 | CYLINDER,C-BAL,5.0″*SCD* |
| 94821 | (MT)PLUG,MODIFIED, 3″NPT,W/.38NPT HOLE |
| 94990 | OIL-SEAL,BIG-BORE,TDS-S |
| 95523 | SHACKLE,ANCHOR,25-TON*SCD* |
| 96290 | TP PCB,+5V REGULATOR BD |
| 96439 | SEAL,U-CUP,4×4.5x.25 |
| 96575 | Серьга |
| 97575 | VALVE,THERMOSTATIC,3-WAY |
| 98290 | LINER,STEM,UPPER |
| 98291 | SEAL, POLYPAK |
| 98479 | TOOL SET,LEE CO,PHM3I |
| 98504 | PLATE,COVER,ACCESS |
| 98692 | DRAIN,BREATHER, SOH=0, R/B 30158431-2 |
| 98898 | CRANK,ASSY,EXTERNAL |
| 105470 | BRAKE CALIPER ASSY. (REPLACES 105470) |
| 105479 | IDS SEAL |
| 105599 | IDS SEAL V-RING |
| 105857 | IDS ADAPTER PLATE, PH-60 |
| 105917 | IDS VALVE,NEEDLE D02 |
| 106052 | IDS NUT,ROLLER |
| 106164 | SHACKLE, 1.5, 17 TON |
| 106167 | BRAKE PAD (MODIFIED) (REPLACES 106167) |
| 107052 | WASHER, LOCK, TAB, .56 DIA |
| 107138 | SLEEVE,WEAR |
| 107520 | IDS TUBE ASSY,BREATHER |
| 107590 | HOSE,FLEX,AIR,10.0ID 25 FOOT LONG |
| 107714 | BRACKET,CONTROL LOOP |
| 108319 | BEARING,ROLLER,TAPER,THRUST |
| 109411 | EXCHANGER,HEAT |
| 109506 | PIN,BAIL,4.25DIAX10.15,MS00009 |
| 109507 | BUSHING SLEEVE 4.25 ID X 5.25 BRZ |
| 109519 | (MT)BEARING,ROLLER,TAPER,200X310MM |
| 109521 | (MT)BEARING,ROLLER,CYLINDRICAL,200X360MM |
| 109522 | (MT)BEARING,ROLLER,CYLINDRICAL,75X160MM |
Related products
-
P614000093/30156326-36s Nov Top Drive Hydraulic...
30156326-36S MOTOR,HYDRAULIC,LOW-SPEED/HIGH-TORQUE 110161-49S MOTOR,HYDRAULIC,LOW-SPEED/HIGH-TORQUE 10377630-003 MOTOR,HYDRAULIC,LOW-SPEED/HIGH-TORQUE P614000093 HYDRAULIC MOTOR 30172180 MOTOR,HYDRAULIC,MODIFIED 30160625 SEAL,HYD MOTOR M364001027 MOTOR,HYDRAULIC,MODIFIED
-
NOV Varco TESCO CANRIG TPEC JH HH BPM TDS Parts...
Below is the spare parts reference list for TDS top drive, including part numbers and corresponding component descriptions. Please verify the part numbers to match your equipment requirements. 11085 RING,HEAD,CYLINDER 12820 PISTON,10DIA 15230 PLATE,INDICATOR,ROTATION 16532 Шпонка 16652 RETAINER, DIE 16781 PYRAMID,TONG,DIE(TYPE”C”ROTARY-TONG) 16812 ORIFICE,.25 31263 SEAL, POLYPAK, DEEP 49963 SPRING, LOCK 50000 PKG, STICK, INJECTION, PLASTIC 50665 RG GSKT,...
-
87605,110563,110562-1,110562-1CE,4104,1100072,1...
87605 KIT,SEAL,REPAIR-PACK,ACCUMULATOR 110563 ACCUMULATOR,HYDR0-PNEUMATIC,4 110562-1 TDS9S ACCUM,HYDRO-PNEU 6″ 110562-1CE TDS9S ACCUM,HYDRO-PNEU 6″,CE 110562-2 KIT,SEAL,REPAIR-PACK,ACCUMULATOR 110563-1 TDS9S ACCUM,HYDRO-PNEU 4″ 110563-1CE TDS9S ACCUM,HYDRO-PNEU 4″,CE 110563-1 KIT,SEAL,REPAIR-PACK,ACCUMULATOR 110564-1 TDS9S ACCUM,HYDRO-PNEU 2″ 110564-1SEP HYDRO-PNEUMATIC ACCUMULATOR, 2″ 114446-500 CHARGING ASSY,ACCUMULATOR C/W GAUGE 16653908-001 Accumulator...
-
API Varco 94203-500 Top Drive Accessories Hydra...
The Internal Blowout Preventer (IBOP) is a vital safety component in top drive systems throughout the drilling industry. This indispensable device is engineered to swiftly seal the drill string, effectively curbing any uncontrolled fluid discharge. As a steadfast guardian, the IBOP offers the first line of defense against the potentially catastrophic scenarios of kicks, blowouts, and environmental hazards. With its robust and resilient engineering, it guarantees operational safety even in the...
-
NOV VARCO 119707 Main Shaft Top Drive Spare Par...
Below is the spare parts reference list for TDS top drive, including part numbers and corresponding component descriptions. Please verify the part numbers to match your equipment requirements. 110040 (MT)SLEEVE,MAINSHAFT 119707 SHAFT,MAIN, TDS10 121131 SHAFT,MAIN 110040-1 SLEEVE, MAINSHAFT, TDS11 117834 Main shaft 30125860-API STEM/MAIN SHAFT,API IDENTIFIED 30125860 STEM/MAIN SHAFT 1065612 Main shaft XT 1044883 Main shaft HT M614000582 MAIN SHAFT 121151 MAIN...
-
TOP DRIVE SPARE, PARTS, NATIONAL OILWELL, VARCO...
VSP has always been committed to ensuring that our customers receive the highest quality oilfield products. We are Manufacturer for Top Drives and it’s spares other oilfield equipments and services to UAE oil drilling companies more than 15+ years, brand including NOV VARCO/ TESCO/ BPM /TPEC/JH SLC/HONGHUA. Product Name: HEAT EXCHANGER Brand: NOV, VARCO Country of origin: USA Applicable models: TDS4SA, TDS8SA, TDS9SA, TDS11SA Part number: 30122104 Price and delivery: Contact us for a quotatio...