Heavy Duty Varco OEM Disc Brake Cylinder Kit 30178890 153 for TDS Top Drive Drilling System
Below is the spare parts reference list for TDS top drive, including part numbers and corresponding component descriptions. Please verify the part numbers to match your equipment requirements.
| 124256 | SAVERSUB, 7-5/8 REG(LG BORE) X NC 38 |
| 120997 | BRACKET, SERVICE LOOP |
| 30173893-BSC | ASSY, EXTERNAL CRANK |
| 53200-27 | COM[OUND, LOCKING |
| 30173922 | HOUSING,CRANK(MACHINING) |
| 77369-16 | THREAD PROTECTlON (NOT SHOWN) |
| 91137-2 | RETAINING RING |
| 30173608 | SLEEVE, CRANK |
| 30177481 | SPRING, WAVE |
| 30177441 | SET, SEAT/BALL |
| 30177478 | CRANK, OPERATING, L H. |
| 30177479 | CRANK, OPERATING, R.H. |
| 30177477 | SEAL, CROWN |
| 91137-15 | STABILIZER, SEAL RING |
| 30177476 | SEAL, U-CUP |
| 30177475 | BACK-UP RING |
| 30177471 | O-RING |
| 30177474 | BACK-UP RING |
| 30177473 | BACK-UP RING |
| 30177472 | O-RING |
| 30177470 | O-RING |
| 30177467 | B0DY, UPPER lB0P, H2S |
| 30177442 | SET,SEAT，BALL |
| 30177480 | CRANK，OPER.- R.H. |
| 77369-11 | THREAD PROTECTOR-7 5/8”RH PIN (NOT SHOWN) |
| 65260191 | RETAINING RING |
| 65060492 | NYLON PLUG |
| 65260197 | BACK-UP RING |
| 65260196 | O-RING |
| 65221191 | BACK-UP RING |
| 10418693 | O-RING |
| 65221490 | SPRING，WAVE |
| 30177547 | SET，SEAT/BALL |
| 65060722 | SLEEVE，CRANK |
| 650606B0 | CRANK，OPER.- R.H. |
| 65270128 | BODY，IBOP |
| 116022-2 | MANIFOLD, ELEV. TILT, ALUM. (MACH.) |
| 108465-12 | PLUG，SHIPPING – SAE-12 |
| 30174106-2 | MANIFOLD，MOUSEHOLE ENABLE/DISABLE |
| 30173708 | PLATE，BLANKING |
| 50103-12-C | SCREW，CAP-SOCKET HEAD |
| 30171688-2 | MANIFOLD，MOUSEHOLE ENABLE/DISABLE |
| 3018A320-502 | BUSHING |
| 30172726-LT | P|N, SEC0NDARY RETENT|0N, D|A. .81 (LOW TEMP) |
| 30172725-2LT | P|N, SEC0NDARY RETENT|0N, D|A. 1.0 (LOW TEMP) |
| 30172724-LT | F| N, SEC0NDARY RETENT|0N, D|A. .75 (LOW TEMP) |
| 30172725-1LT | P| N, SEC0NDARY RETENT|0N, D|A. l.0 (LOW TEMP) |
| 30172723-LT | P|N, SEC0NDARY RETENT|0N, D|A. l.0 (LOW TEMP) |
| 30125801-LT | ASSY, CYLINDER, BYDRAULlC, LlFT (LOW TEMP) |
| 30124964-LT | ROKE, lB0P ACTUATOR (LOW TEHP) |
| 39125050-LT | ASSEHBLY, CLAhP CYLlNDER (LOW TEhP) |
| 124894-LT | TOROUE ARRESTOR (LOW TEMP) |
| 50008-32-C5D | SCREW, CAP-HEX HEAD |
| 30172725-2 | PIN, SEC0NDARY RETENT|0N, D|A. l.0 |
| 30172724-1 | PIN, SECONDARY RETENTI0N, DIA. . 75 |
| 30172725-1 | P|N, SECONDARY RETENT|0N, D|A. l.0 |
| 125594-LT | ASSY, HYD CYL, IBOP ACTUATOR |
| 1300106826 | Mud valve 5185A-DB-RRH-SER 1300106826 DQ500Z |
| 124894-500 | TOROUE ARRESTOR |
| DQ50B-GZ-02 | Ball valve DQ50/70 DQ50B-GZ-02 |
| 44045.72.700 | Platform for container SVP 44045.72.700 BU 6500/450 |
| 30173225 | Electrical Service Loop Kit, TDS |
| 109600 | Service Loop, Fluid |
| 16526154-KIT | Kit, Derrick Termination TDS-8SA/TDS-1000, Standalone, Standard |
| 10966223-ASM | Assembly, Term, J-Box Power, Derrick, Standard, TDS-8SA/TDS-1000 |
| 11346966-ASM | Assembly, Derrick Termination Panel |
| 16508416-ASM | Assembly, Control System, TDS-8SA Yantai-Sinopec Shengli 90M (H317) |
| 96289 | Kit Installation Counterbalance |
| 30171624 | VALVE ENCLOSURE |
| 11479765-001 | Drilling System, TDS-8SA |
| 11479765-002 | Drilling Unit Assembly: TDS-8SA; ABS/CDS Certification |
| 10987464-001 | J-Box: Used for CRT connection in derrick |
| 16526154-001 | DERRICK TERMINATION KIT: Non-Retract Dolly Notes: For Use W/Standalone VFD . |
| 16508416-001 | ASSEMBLY, CONTROL SYSTEM, TDS-8SA |
| 10381708-006 | MOTOR HOUSING ASSY, TDS-8SA: 3.8” Bore, 750Ton, 124”Bail, 7500psi, w/o Deublin, use with Inpro S- Pipe Loc: Right Hand NOTE: Ships with conventional washpipe installed. |
| 16531489-001 | VFD House (Standalone) |
| 10480841-002 | INPRO AIR PURGE ISOLATOR KIT: |
| 51300-117B | O-RING |
| 11024052-011 | TDS DOLLY ASSEMBLY: ABS/CDS Certification Setback x Spacing x Non Retract: 32 X 62 X NONE Rail Size: W14 x 74 S-Loop Bracket Location: Right Hand Roller style: HEAVY DUTY (HD) S-Pipe: Right Hand Block Interface Model: YC-675 |
| 11024049-511 | MOTOR FRAME WELDMENT: TDS-8SA ABS/CDS |
| 10378123-001 | OIL CIRCULATING KIT: TDS-8SA (No motor heaters) Electric: 4HP, EExd, 380VAC/50Hz, 55°C, 3 KW, 3 Phase |
| 94579 | Junction Box, STB1, I.S., Cenelec |
| 30171073 | Manifold Assembly, Air Valve, TDS |
| 30171622-511 | REMOTE VALVE CONTROL |
| 30171622-510 | REMOTE VALVE CONTROL |
| 30171622-6 | BOOT |
| 30179219-5 | BUSHING,ARM,ST-80C |
| 11400040-001 | MOTOR ELEC KIT: TDS-8SA, IEC/ Ex, IP56, -20° to 45°C, 24VDC Solenoids, BX with Rotators, High Temp, J-box labels, J-Box with integral Pressure Switch. S/L Bracket: Right Hand |
| 30171609 | 6 VALVE BANK ASSY |
| 10381503-006 | MOTOR COOLING SYSTEM: TDS-8SA, Local, 2800 CFM, High Temp Standard: Eex, eII T3, T(AMB) = -40° to 55°C, IP44 per SIRA EX 983124X Cert. Motor Electric: 20HP, 380VAC/50Hz, EExd, 55°C, 220VAC Heater |
| 94536-330N | CHECK VALVE,CARTRIDGE |
| 10358989-005 | S-PIPE ELBOW : ABS/CDS Mud hose conn: 5”, Female, Fig.1002 |
| 30157858-2001S | VALVE,CHECK UINE MTD |
| 30160685-RK | REBUILD KIT,TORQUE CYL |
| 59027P230073 | HOSE ASSY |
| 59026P230074 | HOSE ASSY |
| 59047P29J063 | HOSE ASSY |
| 59024P290065 | HOSE ASSY |
| 59047P29M075 | HOSE ASSY |
| 59043P290074 | HOSE ASSY |
| 30156900 | Assembly, Manifold BX Elevator |
| 10447671-001 | CONN-PLUG, 7 SOCKETS W/INLINE RECEPTACLES |
Related products
-
30181755-200-B TESCO CANRIG TPEC JH HH BPM Nov ...
NOV P/N DESCRIPTION M611004371-133DS-C386PN-A 1 SOCKET W/INLINE PLUG & GLAND, BLACK M611004371-133DS-C386PN-B 1 SOCKET W/INLINE PLUG & GLAND, WHITE M611004371-133DS-C386PN-C 1 SOCKET W/INLINE PLUG & GLAND, RED M611004371-133DS-C386PN-D 1 SOCKET W/INLINE PLUG & GLAND, BLUE M611004371-133DS-C386PN-E 1 SOCKET W/INLINE PLUG & GLAND, ORANGE M611004371-133DS-C386PN-D 1 PIN W/INLINE PLUG & GLAND, BLUE M611004371-133DS-C386PN-E 1 PIN W/INLINE PLUG & GL...
-
TDS, TOP DRIVE SPARE PARTS, NATIONAL OILWELL, V...
TDS, TOP DRIVE SPARE PARTS, NATIONAL OILWELL, VARCO, TOP DRIVE, 216864-3, JAW ASSY, NC38NC46, PH100, PIPEHANDLER TDS TOP DRIVE SPARE PARTS: National Oilwell Varco top drive 30151951 LOCK,TOOL,JOINT Gross weight: 20 kg Measured Dimension: After Order Origin : USA/CHINA Price: Please contact us. MOQ: 2 VSP has always been committed to ensuring that our customers receive the highest quality oilfield products. We are Manufacturer for Top Drives and it’s spares other oilfield equipments and...
-
Fitting HoseEnd Crimp 90°Elb,2808，2895，3259，...
314 Fitting,Hyd,90°Elb 316 Fitting,Hyd,90°Elb 318 Fitting,Hyd,90°Elb 319 Fitting,Hyd,90°Elb,#12MJICx#8MNPT 323 Fitting,Hyd,90°Elb 327 Fitting,Hyd,Str 339 Fitting,Hyd,Str,#8FJICx#6MJIC 345 Fitting,Hyd,Str,#16FJICx#12MJIC 349 Fitting,Hyd,45°Elb 352 Fitting,Hyd,90°Elb 353 Fitting,Hyd,90°Elb 354 Fitting,Hyd,90°Elb 355 Fitting,Hyd,90°Elb 362 Fitting Hyd Tee 363 Fitting,Hyd,Tee,#16FNPTx#16FNPTx#16FNPT 373 Fitting,Hyd,Tee 375 Fitting,Hyd,Tee,#12MJICx#12FJIC-Swvl-Runx#12MJIC 376 Fitting,Hyd,Tee 380 F...
-
TESCO TDS Top Drive Cable Various OEM Replaceme...
TESCO CABLE NAME ARTICLE Supply cable “А” TESCO 5006960-2 Supply cable “В” TESCO 5006961-2 Supply cable “С” TESCO 5006962-2 Сable Sensor “T” TESCO 5006964 Control cable (CORD, EXT, EX ROBOTICS A, 14AWG, 37C, 69m, ESI) TESCO 5006963 Auxiliary motor cable TESCO 5052681 Сable Sensor “T” TESCO 730842 Extension cable, “A” – TD automation functions, for TDS EMI 400, core diameter 1.6 mm, 37 cond...
-
Hydraulic Pump / Motor 30158011/30151875/103776...
30177200-575 ENCLOSURE,HP-35S,575V-60HZ 30177200-380 ENCLOSURE,HP-35S,380V-50HZ 30177200 ENCLOSURE,HP-35S,460V-60HZ 30176344-575B MOTOR/PUMP ASSY,HP-35S,575V 50Hz 30176344-575 MOTOR/PUMP ASSY, HP-35S,575V 30176344-380 MOTOR/PUMP ASSY, HP-35S,380V 30176344 MOTOR/PUMP ASSY, HP-35S,460V 18328-575B MOTOR,40 HP,575 V, 3 PH, 50 HZ 18328-575 MOTOR,40 HP,575 V, 3 PH, 60 HZ 18328-380 MOTOR,40 HP,380 V, 3 PH, 50 HZ 18328 MOTOR,40 HP,460 V, 3 PH, 60 HZ 73884 FLEXIBLE DRIVE COUPLING W/ SPLINED HUB 56543-...
-
30156220,124458-100-B,126498-200-25-3-B,3017501...
We can provide the following top drive parts: 655009 SCREW 655026 SPRING (replaces 655019) 655029 HANDLE 655997 PIN 949275 P543502 WAB SHUTTLE VALVE WABCO SHUTTLE 1100229 WRENCH WHEEL BEARING 1202002 VLV, AIR, RELAY, 3/4″-14NPTF, 250 PSI, [VOLUME BS (REPLACES 5453956) 2027910 IBOP, NC50 SPLINE PIN END DUAL 2027991 S-PIPE ASSEMBLY, 4″ FIG 1002 2031495 LIMIT VALVE ASS’Y 2033294 IBOP, DUAL CRNK 6-5/8IF B X 7- 2400680 HEX HEAD CAPSCREW DH, 5/8-11 X 1 1/2 GR5 CD PL 2405080 SCREW,...