Genuine 119561 SLF VARCO Replacement Parts for Perfect Top Drive Fit Oilfield Drilling Rig

Short Description:

We offer a full range of genuine VARCO top drive spare parts designed for NOV TDS 8SA/9SA/10SA/11SA drilling top drive systems, covering IBOP assemblies, washpipe & packing kits, hydraulic/gear oil filters, bearings, gears, tong dies, hydraulic valves, sensors, seals, fasteners, and electrical components.

TDS 9SA For medium duty onshore land rigs & HPHT land wells.

TDS 10SA For heavy duty onshore land rigs & deep shelf land wells.

TDS 11SA

For ultra deep onshore land drilling & medium offshore operations. Adopting AC VFD high performance technology, dual motor high torque structure, and sealed robust design, these parts feature precise torque control, high reliability, enhanced safety, strong durability, and excellent compatibility. They effectively reduce drilling cycle time, lower maintenance costs, minimize thread damage and pipe sticking risks, and ensure stable & efficient operation in directional drilling, casing running, coring, and tripping operations, widely used in onshore & offshore oilfield drilling equipment.

Send email to us

Product Detail

Product Tags

Below is the spare parts reference list for TDS top drive, including part numbers and corresponding component descriptions. Please verify the part numbers to match your equipment requirements.

1.01.22.001	Upper bearing end cover
1.01.22.002	Upper bearing end cover
1.01.22.003	Upper bearing end cover
1.01.22.004	Upper bearing end cover
1.01.22.005	Upper bearing end cover
1.01.22.006	Upper bearing end cover
1.01.22.007	Upper bearing end cover
1.01.22.008	Upper bearing end cover
1.01.22.009	Upper bearing end cover
1.01.22.010	Upper bearing end cover
1.01.22.011	Upper bearing end cover
1.01.22.012	Upper bearing end cover
1.01.22.013	Upper bearing end cover
1.01.22.014	Upper bearing end cover
1.01.22.015	Upper bearing end cover
1.01.22.016	Upper bearing end cover
1.01.22.017	Upper bearing end cover
1.01.22.018	Upper bearing end cover
1.01.22.019	Upper bearing end cover
1.01.22.020	DQ90Ⅱ
1.01.22.022	Upper bearing end cover
1.01.22.023	Upper bearing end cover
1.01.23.001	Bearing end cap
1.01.23.002	Bearing end cap
1.01.23.003	Bearing end cap
1.01.23.004	Bearing end cap
1.01.23.005	Bearing end cap
1.01.23.006	Bearing end cap
1.01.23.007	Bearing end cap
1.01.23.008	Bearing end cap
1.01.23.009	Bearing end cap
1.01.23.010	Bearing end cap
1.01.23.011	DQ90Ⅱ
1.01.23.012	DQ90Ⅱ
1.01.23.014	Second shaft bearing end cover
1.01.23.015	Dull cover on the second axis
1.01.23.017	Left bearing end cover
1.01.23.018	Right bearing end cover
1.01.23.019	DQ400601
1.01.35.011	Lower bearing end cover
1.01.24.002	Bearing pad
1.01.24.003	Bearing pad
1.01.24.004	Bearing pad
1.01.24.005	Bearing pad
1.01.24.006	Bearing pad
1.01.24.007	Bearing pad
1.01.24.008	Bearing pad
1.01.24.009	Bearing pad
1.01.24.010	Bearing pad
1.01.24.011	DQ90Ⅱ
1.01.24.012	DQ70
1.01.24.051	DQ50
1.01.24.052	Bearing pad
1.01.24.053	DQ400601
1.01.24.054	Bearing pad
1.01.25.001	Shaft end baffle
1.01.25.002	Shaft end baffle
1.01.25.003	Shaft end baffle
1.01.25.004	Shaft end baffle
1.01.25.005	Shaft end baffle
1.01.25.006	Shaft end baffle
1.01.25.007	DQ50
1.01.25.008	DQ50
1.01.25.010	DQ40
1.01.25.011	DQ40
1.01.25.012	DQ400601
1.01.26.001	Two axis adjustment sleeve
1.01.26.002	Two axis adjustment sleeve
1.01.26.003	Two axis adjustment sleeve
1.01.26.004	Two axis adjustment sleeve
1.01.26.005	Two axis adjustment sleeve
1.01.26.006	DQ90Ⅱ
1.01.27.001	First stage small gear
1.01.27.002	First stage small gear
1.01.27.003	DQ90Ⅱ
1.01.27.004	First stage small gear
1.01.27.005	90Ⅰ-B
1.01.28.001	First stage large gear
1.01.28.002	First stage large gear
1.01.28.003	First stage large gear
1.01.28.004	First stage large gear
1.01.28.005	DQ90Ⅱ
1.01.28.006	First stage large gear
1.01.35.012	Lower bearing end cover
1.01.28.008	First stage large gear
1.01.28.009	First stage large gear
1.01.28.011	90Ⅰ-B
1.01.29.001	Dust cover
1.01.29.002	Dust cover
1.01.29.003	Dust cover
1.01.29.004	Dust cover
1.01.29.005	DQ400601
1.01.29.006	DQ400601
1.01.29.007	DQ400601
1.01.30.001	One axis fixed distance ring
1.01.31.001	Two axis fixed distance ring
1.01.31.002	Two axis fixed distance ring
1.01.31.003	Two axis fixed distance ring
1.01.31.004	Two axis fixed distance ring
1.01.31.005	Two axis fixed distance ring
1.01.31.006	Two axis fixed distance ring
1.01.31.007	DQ90Ⅱ
1.01.31.009	Two axis fixed distance ring
1.01.31.010	Three axis fixed distance ring
1.01.31.011	Two axis fixed distance ring
1.01.31.012	Two axis fixed distance ring
1.01.32.001	Adjusting the gasket
1.01.32.002	Adjusting the gasket set
1.01.32.003	DQ90Ⅱ
1.01.32.004	DQ90Ⅱ
1.01.33.001	Secondary gear
1.01.33.002	Secondary gear
1.01.33.003	Secondary gear
1.01.33.004	Secondary gear
1.01.33.005	Secondary gear
1.01.33.006	Secondary gear
1.01.33.007	Secondary gear
1.01.33.008	DQ90Ⅱ
1.01.33.009	Secondary gear
1.01.33.010	Secondary gear
1.01.33.011	Secondary gear
1.01.33.012	Secondary gear

Previous: 35MPa High Pressure Heavy Duty Hydraulic Motor 109542 for TDS11SA Shot Pin Oilfield Drilling Top Drive

Next:

AC VFD technology

HPHT wells

long service life

Oilfield Drilling Rig

top drive

Varco

VARCO top drive parts

Write your message here and send it to us

Related products

120113,120113-2 MOUNT, ENCODER,NOV,TOP DRIVE,SP...

Product Name: MOUNT, ENCODER Brand: NOV, VARCO,TESCO,TPEC,JH,HH,, Country of origin: USA Applicable models: TDS4SA, TDS8SA, TDS9SA, TDS11SA Part number: 78002,112875,113246,113440,116868 Price and delivery: Contact us for a quotation MOQ: 3 sets ……. 78002 PLATE,CLAMP,SERVICE LOOP 112875 PIN,PIVOT,BOGEY 113246 BRACKET,PRE-FILL,VALVE (P) 113440 BRACKET,MOUNTING,FILTER 116868 BRACKET,SERVICE LOOP,WELDMENT/MACHINING 117061 BRACKET,MOUNTING,S-TUBE 117853 YOKE,IBOP,...

See more products >
120797-501 TDS11-SA Machining Gooseneck

117063 S-PIPE, RIGHT HAND, OUTSIDE 120797 GOOSENECK,MACHINING 10799241-002 KIT;GENERAL;LANYARD (GOOSENECK PLUG);TOP 117063-7500 S-PIPE,OUTSIDE,RH,WELD,7500,TDS9 (T) 92808-3 GOOSENECK (MACHINING) 7500 PSI,TDS (T) 13771 ТРУБА S-образной формы №13771 Теско 1170020 Swivel gooseneck assembly, 3″ O.D., hammer joints, Fig602 configuration 1200567934 ГуCак B Cборе DQ027.06.00Ⅱ / 1200567934 Hong Hua DQ500Z 1400025331 Датчик даBления 1400025331 Hong Hua DQ500Z 1.06.02.008...

See more products >
S-PIPE PACKAGE, TDS-9/11SA,91677-500,30156835-R...

VSP has always been committed to ensuring that our customers receive the highest quality oilfield products. We are Manufacturer for Top Drives and it’s spares other oilfield equipments and services to UAE oil drilling companies more than 15+ years, brand including NOV VARCO/ TESCO/ BPM /TPEC/JH SLC/HONGHUA. Product Name: S-PIPE PACKAGE, TDS-9/11SA Brand: NOV, VARCO,TESCO,TPEC,HH,JH, Country of origin: USA Applicable models: TDS4SA, TDS8SA, TDS9SA, TDS11SA Part number: 91677-500 30156835-R75-2...

See more products >
Top Drive Service Loops (Cables)

Our company can provide these products: M614002913-06-GLAND,1/2″NPT,EX,ARMORED-CABLE,NON-POTD (replaces 83444-04) 13088- KIT, SERVICE LOOP, SENSOR T 13088 87975-CABLE,2,4-COND,TW.PR,IND/SHIELD-PVC*SCD* 110076-(MT)CABLE,ARMORED,MULTI CONDUCTOR / SEE 115879-PLATE,MOUNT,CABLE (P) 118993-CABLE,INSULATED,1-CONDUCTOR 30156220-CABLE PROFIBUS + 3/C X ,075MM 30173477-646KCMIL POWER SERVICE LOOP, 4IN X 86FT HOSE, TD END - 20FT WITHOUT CONNECTORS, DERRICK END – 4FT EX PLUG & SOCKETS, GRO...

See more products >
High Pressure Swivel Joints: Ball Bearing-Equip...

Our high pressure swivel joints are ball bearing-equipped metal pipe connectors, available in sizes 1-4, with rated working pressures from 14 MPa to 140 MPa (2000 psi to 20000 psi). We offer swivel joints and repair kits suitable for ambient, low-temperature, and sour gas (含硫气体) service conditions. These joints are available in long-radius and short-radius configurations: Long-radius swivel joints feature smooth inner bores that minimize fluid flow resistance, with superior erosion and c...

See more products >
API 7K TYPE B MANUAL TONGS Drill String Handling

Type Q89-324/75(3 3/8-12 3/4 in)B Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws and handling shoulders. Technical Parameters No.of Latch Lug Jaws Latch Stop Size Pange Rated Torque in mm KN·m 5a 1 3 3/8-4 1/8 86-105 55 2 4 1/8-5 1/4 105-133 75 5b 1 4 1/4-5 1/4 108-133 75 2 5-5 3/4 127-146 75 3 6-6 3/4 152-171...

See more products >