Factory Directly Sibley Drill Press - Truck-Mounted Rig for Oil Well Drlling – VS
Factory Directly Sibley Drill Press - Truck-Mounted Rig for Oil Well Drlling – VS Detail:
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc.
|
Rig type |
ZJ10/600 |
ZJ15/900 |
ZJ20/1350 |
ZJ30/1800 |
ZJ40/2250 |
|
|
Nominal drilling depth, m |
127mm(5″) DP |
500~800 |
700~1400 |
1100~1800 |
1500~2500 |
2000~3200 |
|
114mm(41/2″) DP |
500~1000 |
800~1500 |
1200~2000 |
1600~3000 |
2500~4000 |
|
|
Max. hook load, kN(t) |
600(60) |
900(90) |
1350(135) |
1800(180) |
2250(225) |
|
|
Drawworks |
Type |
Single drum / Double drum |
||||
|
Power, kW |
110-200 |
257-330 |
330-500 |
550 |
735 |
|
|
Drawworks lifting shifts |
5+1R |
|||||
|
Brake type |
Belt brake /Disc brake+ Rotor hydromatic brake/ Push disc water cooled brake |
|||||
|
Line number of traveling system |
Drilling line number |
6 |
8 |
|||
|
Max. line number |
8 |
10 |
||||
|
Drilling wire Dia., mm(in) |
22(7/8), 26(1) |
26(1) |
29(1 1/8) |
29(1 1/8) |
32(1 1/4) |
|
|
Rotary table opening Dia., mm (in) |
445(17 1/2), 520(20 1/2) |
520(20 1/2), 698.5(27 1/2) |
||||
|
Drill floor height, m |
3, 4, 4.5 |
4, 4.5, 5 |
4, 5 |
5, 6 |
6, 7 |
|
|
Mast type |
Mast type double section hydraulic raising |
|||||
|
Mast height, m |
31, 33, 35 |
33, 35 |
36, 38 |
38, 39 |
||
|
Max. speed, km/h |
45 |
|||||
|
Chassis drive type |
10×8 |
12×8 |
14×8 |
14×10 |
||
|
Note: The data in the table permit changing relevant parameters as per customers’ request, and will be executed as agreed by both parties. |
||||||
Product detail pictures:
Related Product Guide:
We stay with the basic principle of "quality initially, services first, steady improvement and innovation to fulfill the customers" for your management and "zero defect, zero complaints" as the quality objective. To perfect our company, we give the goods while using the good high-quality at the reasonable selling price for Factory Directly Sibley Drill Press - Truck-Mounted Rig for Oil Well Drlling – VS , The product will supply to all over the world, such as: The Swiss, Swansea, Palestine, Profession, Devoting are always fundamental to our mission. We have always been in line with serving customers, creating value management objectives and adhering to the sincerity, dedication, persistent management idea.
By Antonio from San Diego - 2017.12.19 11:10
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Lee from Namibia - 2017.03.07 13:42
Related products
-
Massive Selection For Honeywell Stg974 - BPM T...
BPM Top Drive Spare Parts list: P/N. Specification 602020210 Flat Steel Wire Cylindrical Spiral Compression Spring 602020400 flat wire cylindroid helical-coil compression spring 970203005 Gooseneck (inch) for DQ70BSC BPM top Drive 970351002 Lock,device upper 970351003 Lock,device lower 1502030560 1705000010 1705000140 Sealant 1705000150 Thread Glue 2210170197 2210270197 IBOP 3101030170 flame-proof motor 3101030320 BPM EXPLN SUPPR MOTOR 3101030320 3101030430 flame-proof motor 3301010038 Proxim...
-
Rapid Delivery For 5mm Drill Bit To Inches - T...
Series of self-propelled truck-mounted rig are suitable to meet the operation requirements of drilling 1000~4000 (4 1/2″DP) oil, gas and water wells. The overall unit bears the features of reliable performance, easy operation, convenient transportation, low operation and moving expenses, etc. Rig type ZJ10/600 ZJ15/900 ZJ20/1350 ZJ30/1800 ZJ40/2250 Nominal drilling depth, m 127mm(5″) DP 500~800 700~1400 1100~1800 1500~2500 2000~3200 114mm(41/2″) DP 500~1000...
-
Best Price On Hand Drill - API 7K TYPE SDD MAU...
No.of Latch Lug Jaws No.of Hinge Pin Hole Size Pange Rated Torque in mm 1# 1 4-5 1/2 101.6-139.7 140KN·m 5 1/2-5 3/4 139.7-146 2 5 1/2-6 5/8 139.7 -168.3 6 1/2-7 1/4 165.1-184.2 3 6 5/8-7 5/8 168.3-193.7 73/4-81/2 196.9-215.9 2# 1 8 1/2-9 215.9-228.6 9 1/2-10 3/4 241.3-273 2 10 3/4-12 273-304.8 3# 1 12-12 3/4 304.8-323.8 100KN·m 2 13 3/8-14 339.7-355.6 15 381 4# 2 15 3/4 400 80KN·m 5# 2 16 406.4 17 431.8
-
Factory Wholesale Boda Drill Machine - Workove...
General Description： Workover rigs made by our company are designed and manufactured in accordance with standards of API Spec Q1, 4F, 7K, 8C and relevant standards of RP500, GB3826.1, GB3826.2, GB7258, SY5202 as well as “3C” compulsory standard. Whole workover rig has a rational structure, which only occupies a small space due to its high degree of integration. Heavy load 8×6, 10×8, 12×8, 14×8 regular drive self-propelled chassis and hydraulic power steering system are ut...
-
Factory Cheap Hot Nu Flow Turbine Meter - CANR...
Canrig Top Drive Spare Parts list: E14231 Cable N10007 Temperature Sensor N10338 Display Module N10112 Module E19-1012-010 Relay E10880 Relay N21-3002-010 Analog input module N10150 CPU M01-1001-010 “BRG,TPRD ROL,CUPCANRIGM01-1001-010 1EA M01-1063-040, AS A SET, REPLACES BOTH THE M01-1000-010 AND M01-1001-010 (M01-1001-010 HAS BECOME OBSOLETE)” M01-1002-010 BRG, TPRD ROL, CONE, 9.0 x 19.25 x 4.88 M01-1003-010 BRG, TPRD ROL, CUP, 9.0 x 19.25 x 4.88 829-18-0 PLATE, RETAINING, BUW S0...
-
Factory Wholesale 216p-6-4 - TPEC Top Drive Sy...
TPEC Top Drive Spare Parts list: PN. Name 1.07.14.001 Brake block 1.07.08.002 key 2.3.04.003 Brake (bracket) 2.4.25.011 Steel pipe u 2.4.25.025 Steel pipe (H) 2.4.25.013 Steel pipe П 2.4.34.073 Fittings, cross-over sub 2.4.34.047 Fittings, cross-over sub 2.4.34.074 Fittings, four-way sub 2.4.34.089 Pipe fitting,tee sub 1.10.05.007 pulley 1.03.15.204 Lock nut 1.08.10.005 IBOP actuator 1.08.03.013 Upper IBOP 1.08.04.008 Lower IBOP 2.4.25.028 Steel pipe 2.4.25.018 Steel pipe c 2.4.25.027 Steel p...