Best-Selling Impact Drill For Cars - DC Drive Drilling Rig/ Jackup Rig 1500-7000m – VS
Best-Selling Impact Drill For Cars - DC Drive Drilling Rig/ Jackup Rig 1500-7000m – VS Detail:
The drawworks, rotary table and mud pump are driven by DC motors, and the rig can be used in deep well and ultra deep well operation onshore or offshore.
• It can be equipped with top drive device.
• It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted.
Type and Main Parameters of DC Drive Drilling Rig:
| Type |
ZJ40/2250DZ |
ZJ50/3150DZ |
ZJ70/4500DZ |
ZJ90/6750DZ |
|||
| Nominal drilling depth（114mm drill pipe） |
2500—4000 |
3500—5000 |
4500—7000 |
6000—9000 |
|||
| Max. hook load, KN |
2250 |
3150 |
4500 |
6750 |
|||
| Max. line number of traveling system |
10 |
12 |
12 |
14 |
|||
| mm(in)
Drilling wire Dia. |
32(1 1/4) |
35 (1 3/8) |
38(1 1/2) |
45(1 3/4) |
|||
| Sheave OD of traveling system |
1120(44) |
1270(50) |
1524(60) |
1524(60) |
|||
| Swivel stem through-hole Dia. |
75(3) |
75(3) |
75(3) |
102(4) |
|||
| Rated power of drawwork KW(hp) |
735(1000) |
1100(1500) |
1470(2000) |
2210(3000) |
|||
| Drawwork shifts |
4 |
4 |
4 |
4 |
|||
| Opening Dia. of rotary table |
698.5(27 1/2) |
698.5 (27 1/2) |
952.5 (37 1/2) |
952.5 (37 1/2) |
952.5 (37 1/2) |
1257.3 (49 1/2) |
|
| Rotary table shifts |
2 |
2 |
2 |
2 |
|||
| Single mud pump power |
960(1300) |
960 (1300) |
1180 (1600) |
1180 (1600) |
1620 (2200) |
||
| Mast working height |
43(142) |
45(147) |
45(147) |
48(157) |
|||
| Drill floor height |
7.5(25) |
7.5(25) |
9(30) |
9(30) |
10.5 (35) |
10.5 (35) |
12(40) |
| Clear height of drill floor |
6.26(20.5) |
6.26 (20.5) |
7.62 (25) |
7.42(24.5) |
8.92(29.5) |
8.7 (28.5) |
10(33) |
| Note |
DZ——DC drive drilling rig |
||||||
Product detail pictures:
Related Product Guide:
We usually think and practice corresponding for the change of circumstance, and grow up. We aim at the achievement of a richer mind and body as well as the living for Best-Selling Impact Drill For Cars - DC Drive Drilling Rig/ Jackup Rig 1500-7000m – VS , The product will supply to all over the world, such as: Georgia, New Zealand, Stuttgart, We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.
By Deirdre from Bahamas - 2018.06.26 19:27
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Mabel from Mumbai - 2018.11.22 12:28
Related products
-
Special Price For Router Drill Bits - Mechanic...
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth. Mechanical Drive Drilling Rig Basic Parameters: Type ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ50/3150L(J) ZJ70/4500L Nominal drilling depth 1200—2000 1600—3000 2500—4000 3500—5000 4500—7000 Max. hook load KN 1350 1700 2250 3150 4500 ...
-
Manufacturing Companies For Concrete Core - BP...
BPM Top Drive Spare Parts list: P/N. Specification 602020210 Flat Steel Wire Cylindrical Spiral Compression Spring 602020400 flat wire cylindroid helical-coil compression spring 970203005 Gooseneck (inch) for DQ70BSC BPM top Drive 970351002 Lock,device upper 970351003 Lock,device lower 1502030560 1705000010 1705000140 Sealant 1705000150 Thread Glue 2210170197 2210270197 IBOP 3101030170 flame-proof motor 3101030320 BPM EXPLN SUPPR MOTOR 3101030320 3101030430 flame-proof motor 3301010038 Proxim...
-
Factory Wholesale Milwaukee M12 Fpd - TOP DRIV...
NOV Varco Top drive system Varco TDS TDS-3, TDS-3S, TDS-4, TDS-4S, TDS-5, TDS-7S Varco TDS TDS-8SA, TDS-9SA, TDS-10SA, TDS-11SA, TDS10SH, TDS11SH TDS Manufacture IBOP MODEL O.D. I.D. L thread API in mm in mm in mm VARCO hydraulic187 IBOP 110103-500 7-23/64 187 3-1/16 78 22-1/2 572 6-5/8 REG BOX-6-5/8 REG BOX manual 187 IBOP 14706-500 7-23/64 187 3-1/16 78 22-19/32 523 6-5/8 REG BOX-6-5/8 REG PIN 30177592 BALL/SEAT SET-LOWER IBOP, EXT STOP,ST BO(replaces 99497) 110186 CYLINDER,ACTU...
-
18 Years Factory Api 6a Trim Chart - TESCO Top...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
Hot Selling For Rubber Impeller - VARCO (NOV) ...
VARCO (NOV) Top Drive Spare Parts list: PART NUMBER DESCRIPTION 11085 RING,HEAD,CYLINDER 31263 SEAL, POLYPAK, DEEP 49963 SPRING, LOCK 50000 PKG, STICK, INJECTION, PLASTIC 53208 SPART,FTG, GREASE STR, DRIVE 53408 PLUG, PLASTIC PIPE CLOSURE 71613 BREATHER,RESERVOIR 71847 CAM FOLLOWER 72219 SEAL,PISTON 72220 SEAL ROD 72221 WIPER, ROD 76442 GUIDE, ARM 76443 COMPRESSION SPRING 1.95 76841 TDS-3 SWITCH PRESSURE EEX 77039 SEAL,LIP 8.25×9.5x.62 77039 SEAL,LIP 8.25×9.5x.62 78916 NUT,FIXING*SC...
-
Lowest Price For Diamond Core Bit - VARCO (NOV...
VARCO (NOV) Top Drive Spare Parts list: PART NUMBER DESCRIPTION 11085 RING,HEAD,CYLINDER 31263 SEAL, POLYPAK, DEEP 49963 SPRING, LOCK 50000 PKG, STICK, INJECTION, PLASTIC 53208 SPART,FTG, GREASE STR, DRIVE 53408 PLUG, PLASTIC PIPE CLOSURE 71613 BREATHER,RESERVOIR 71847 CAM FOLLOWER 72219 SEAL,PISTON 72220 SEAL ROD 72221 WIPER, ROD 76442 GUIDE, ARM 76443 COMPRESSION SPRING 1.95 76841 TDS-3 SWITCH PRESSURE EEX 77039 SEAL,LIP 8.25×9.5x.62 77039 SEAL,LIP 8.25×9.5x.62 78916 NUT,FIXING*SC...