API 7K TYPE AAX MANUAL TONGS Drill String Operation
Type Q73-340/75(2 7/8-13 3/8in)AAX Manual Tong is an essential tool in oil operation to fasten remove the screws of drill pipe and casing joint or coupling. It can be adjusted by changing latch lug jaws.
Technical Parameters
|
No.of Latch Lug Jaws |
Size Pange | Rated Torque | |
|
mm |
in |
KN·m |
|
|
1# |
73-95.25 |
2 7/8-3 3/4 |
55 |
|
2# |
88.9-114.3 |
3 1/2-4 1/2 |
|
|
3# |
107.95-133.35 |
4 1/4-5 1/4 |
75 |
|
4# |
127-177.8 |
5-7 |
|
|
5# |
174.6-219.1 |
6 7/8-8 5/8 |
|
|
6# |
228.6-273.05 |
9-10 3/4 |
40 |
|
7# |
273.05-298.45 |
10 3/4-11 3/4 |
|
|
8# |
339.7 |
13 3/8 |
|
Related products
-
API 7K UC-3 CASING SLIPS Pipe handling tools
Casing Slips type UC-3 are multi-segment slips with of 3 in/ft on the diameter taper slips (except size 8 5/8”). Every segment of one slip is forced equally while working. Thus the casing could keep a better shape. They should work together with spiders and insert bowls with same taper. The slip are designed and manufactured according to API Spec 7K Technical Parameters Casing O.D Specification of body Total Number of segments Number of Insert Taper Rated Cap(Sho...
-
TYPE SPSINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...
-
API 7K Type DD Elevator 100-750 tons
Model DD center latch elevators with square shoulder are suitable for handling tubing casing, drill collar, drill pipe, casing and tubing. The load ranges from 150 tons 350 tons. The size ranges from 2 3/8 to 5 1/2 in. The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(Short Tons) DP Casing Tubing DD-150 2 3/8-5 1/2 4...
-
API 7K TYPE SDD MAUNAL TONGS to Drill String
No.of Latch Lug Jaws No.of Hinge Pin Hole Size Pange Rated Torque in mm 1# 1 4-5 1/2 101.6-139.7 140KN·m 5 1/2-5 3/4 139.7-146 2 5 1/2-6 5/8 139.7 -168.3 6 1/2-7 1/4 165.1-184.2 3 6 5/8-7 5/8 168.3-193.7 73/4-81/2 196.9-215.9 2# 1 8 1/2-9 215.9-228.6 9 1/2-10 3/4 241.3-273 2 10 3/4-12 273-304.8 3# 1 12-12 3/4 304.8-323.8 100KN·m 2 13 3/8-14 339.7-355.6 15 381 4# 2 15 3/4 400 80KN·m 5# 2 16 406.4 17 431.8 ...
-
TYPE SJ SINGLE JOINT ELEVATORS
SJ series auxiliary elevator is mainly used as a tool in handling single casing or tubing in oil and natural gas drilling and cementing operation. The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment. Technical Parameters Model Size(in) Rated Cap(KN) in mm SJ 2 3/8-2 7/8 60.3-73.03 45 3 1/2-4 3/4 88.9-120.7 5-5 3/4 127-146.1 6-7 3/4 152.4-193.7 8 5/8-10...
-
API 7K Safety Clamps for Drilling String Operation
Safety Clamps are tools for handling flush joint pipe and drill collar. There are three types of safety clamps: Type WA-T, Type WA-C and Type MP. Technical Parameters Model pipe O.D.(in) No. of Chain links Model pipe O.D.(in) No. ofChain links WA-T 1 1/8-2 4 MP-S 2 7/8-4 1/8 7 4-5 8 MP-R 4 1/2-5 5/8 7 2 1/8-3 1/4 5 5 1/2-7 8 6 3/4-8 1/4 9 3 1/2-4 1/2 6 9 1/4-10 1/2 10 MP-M 10 1/2-11 1/2 11 WA-C 3 1/2-4 5/8 7 11 1/2-12 1/2 12 4 1/2-5 5/8 8 12 1/2...