2022 China New Design Quarter Inch Drill Bit - DC Drive Drilling Rig/ Jackup Rig 1500-7000m – VS
2022 China New Design Quarter Inch Drill Bit - DC Drive Drilling Rig/ Jackup Rig 1500-7000m – VS Detail:
The drawworks, rotary table and mud pump are driven by DC motors, and the rig can be used in deep well and ultra deep well operation onshore or offshore.
• It can be equipped with top drive device.
• It can be equipped with overall moving slide rail or stepping device to meet the requirements for movement between well locations as cluster drilling is conducted.
Type and Main Parameters of DC Drive Drilling Rig:
| Type |
ZJ40/2250DZ |
ZJ50/3150DZ |
ZJ70/4500DZ |
ZJ90/6750DZ |
|||
| Nominal drilling depth（114mm drill pipe） |
2500—4000 |
3500—5000 |
4500—7000 |
6000—9000 |
|||
| Max. hook load, KN |
2250 |
3150 |
4500 |
6750 |
|||
| Max. line number of traveling system |
10 |
12 |
12 |
14 |
|||
| mm(in)
Drilling wire Dia. |
32(1 1/4) |
35 (1 3/8) |
38(1 1/2) |
45(1 3/4) |
|||
| Sheave OD of traveling system |
1120(44) |
1270(50) |
1524(60) |
1524(60) |
|||
| Swivel stem through-hole Dia. |
75(3) |
75(3) |
75(3) |
102(4) |
|||
| Rated power of drawwork KW(hp) |
735(1000) |
1100(1500) |
1470(2000) |
2210(3000) |
|||
| Drawwork shifts |
4 |
4 |
4 |
4 |
|||
| Opening Dia. of rotary table |
698.5(27 1/2) |
698.5 (27 1/2) |
952.5 (37 1/2) |
952.5 (37 1/2) |
952.5 (37 1/2) |
1257.3 (49 1/2) |
|
| Rotary table shifts |
2 |
2 |
2 |
2 |
|||
| Single mud pump power |
960(1300) |
960 (1300) |
1180 (1600) |
1180 (1600) |
1620 (2200) |
||
| Mast working height |
43(142) |
45(147) |
45(147) |
48(157) |
|||
| Drill floor height |
7.5(25) |
7.5(25) |
9(30) |
9(30) |
10.5 (35) |
10.5 (35) |
12(40) |
| Clear height of drill floor |
6.26(20.5) |
6.26 (20.5) |
7.62 (25) |
7.42(24.5) |
8.92(29.5) |
8.7 (28.5) |
10(33) |
| Note |
DZ——DC drive drilling rig |
||||||
Product detail pictures:
Related Product Guide:
To be a result of ours specialty and repair consciousness, our corporation has won a good popularity amid consumers everywhere in the environment for 2022 China New Design Quarter Inch Drill Bit - DC Drive Drilling Rig/ Jackup Rig 1500-7000m – VS , The product will supply to all over the world, such as: Cairo, New Delhi, Vietnam, If you are for any reason unsure which product to select, do not hesitate to contact us and we are going to be delighted to advise and assist you. This way we are going to be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We have been looking for more and more customers to create the glorious future.
By Sabrina from Bulgaria - 2017.12.09 14:01
Reasonable price, good attitude of consultation, finally we achieve a win-win situation,a happy cooperation!
By Frederica from Albania - 2017.09.26 12:12
Related products
-
Factory Price Ge 5kcp39jg - HH Top Drive Syste...
HH Top Drive Spares Parts list: Die plate 3.5 “dq020.01.12.01 № 1200437624 dq500z Die plate 4,5 “№ 1200437627 dq020.01.13.01 dq500z Die plate 5,5 “№ 1200440544 dq020.01.14.01 dq500z Die plate 6-5 / 8 “dq027.01.09.02 № 1200529267 dq500z Jaw plate 120-140 3,5 “dq026.01.09.02 № 1200525399 Jaw plate 160-180 4,5 “dq026.01.07.02 № 1200525393 dq500z Jaw plate 180-200 5,5 “№ 1200525396 dq026.01.08.02 dq500z Die bracket 6-5 / 8 “dq027.01.09.03 № 12005292...
-
High Performance 6es7132-0bh11-0xb0 - TESCO To...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
Newly Arrival Mark 1 Drill Press - Mechanical ...
The drawworks, rotary table and mud pumps of mechanical drive drilling rig are powered by diesel engine and driven by compound way, and the rig can be used for oil-gas field development on land below 7000m well depth. Mechanical Drive Drilling Rig Basic Parameters: Type ZJ20/1350L(J) ZJ30/1700L(J) ZJ40/2250L(J) ZJ50/3150L(J) ZJ70/4500L Nominal drilling depth 1200—2000 1600—3000 2500—4000 3500—5000 4500—7000 Max. hook load KN 1350 1700 2250 3150 4500 ...
-
Discountable Price Climax Lubricants & Equi...
TESCO Top Drive Spare Parts list: 1320014 Cylinder Lock, P/H, EXI/HXI 1320015 Ring,Snap,Internal,Truarc N500-500 820256 Ring,Snap,Internal,Truarc N500-150 510239 Screw,cap Nex HD 1″-8UNCx8,5,GR8,PLD,DR,HD 0047 GAUGE Lig Filled 0-300Psi/kPa 2,5″ODx1/4″MNPT,LM 0072 TERMO 304 S/S,1/2×3/4×6.0 LAG 0070 TERMOMETR BIMETEL 0-250, 1/2″ 1320020 VALVE CATRIDGE RELIEF 400Psi,50GPM SUN RPGC-LEN 0062 GAUGE Lig Filled 0-100Psi/kPa 2,5″ODx1/4″MNPT,LM 1502 Fiting ...
-
2022 China New Design Bench Mounted Pillar Dril...
General Description： Workover rigs made by our company are designed and manufactured in accordance with standards of API Spec Q1, 4F, 7K, 8C and relevant standards of RP500, GB3826.1, GB3826.2, GB7258, SY5202 as well as “3C” compulsory standard. Whole workover rig has a rational structure, which only occupies a small space due to its high degree of integration. Heavy load 8×6, 10×8, 12×8, 14×8 regular drive self-propelled chassis and hydraulic power steering system are ut...
-
Best-Selling Forte Drill Machine - Workover Ri...
General Description： Workover rigs made by our company are designed and manufactured in accordance with standards of API Spec Q1, 4F, 7K, 8C and relevant standards of RP500, GB3826.1, GB3826.2, GB7258, SY5202 as well as “3C” compulsory standard. Whole workover rig has a rational structure, which only occupies a small space due to its high degree of integration. Heavy load 8×6, 10×8, 12×8, 14×8 regular drive self-propelled chassis and hydraulic power steering system are ut...